keyboard driver does not not on any computer
My keyboard malfunctioned. I used the keyboard with success, unplugged the keyboard temporarily and when plugged in again, I received the notice that the driver has not been installed successfully, the device is defective, and the device is not recognized. I launched the standard procedures, including running microsoft software troubleshooting and following the instructions on the help pages including this one. Measures taken include:
Hi Anthony,.
Your keyboard does not work in addition to a computer, which suggests that there is a hardware problem in the keyboard. In addition, you have already performed the steps that ensured that the software part associated with this question is not causing the problem.
Yes, hardware failure of a keyboard is not something that we see too often; but it happens to computer keyboards. And unfortunately, if we go through the symptoms of the problem, your keyboard is also faced with a hardware failure. So, at this point, get the keyboard checked by someone who knows hardware diagnostic would be the best thing to do. Maybe his small repair that the keyboard should or may be you will need to replace the keyboard - only a certified hardware technician will be able to confirm this for you.
Hope that better explains the issue. Do not respond if you have any concerns with Windows, we are happy to be of assistance.
Tags: Windows
Similar Questions
-
Satellite M40X-116 - drive does not recognize any CD or DVD
Hi all!
I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
Please I need your help as soon as POSSIBLE.
If you know what could be the problem, please, just send an e-mail to [email protected]
Thank you all for the cooperation
Best regards
Marian - RomaniaHello
to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.
Good bye
-
keyboard driver and the mouse does not, uninstall driver does not work, any ideas?
Just bought a sony vaio and have the driver of keyboard and mouse not working, uninstall the driver does not work, no idea how to solve this problem
Hello
Exactly how you are trying to install the driver?
We will analyze and identify the cause of the problem. You can connect a keyboard or an external mouse and check.
Method 1: Hardware store.
Run the troubleshooter of material and check if it works.
Follow the steps to run the Troubleshooter:
a. press the keys Windows + C on your keyboard to show the charms.
b. type Troubleshooting , and then clicksolving problems under settings.
c. now, type Hardware Troubleshooter in the optionSearch .
d. click convenience hardware store to run the troubleshooter.
Method 2:
http://www.Sony.co.in/section/support
Note: Search the driver by using the model number and download the latest driver.
Reference:
Why Windows is not find my device?
http://Windows.Microsoft.com/en-in/Windows-8/why-isn ' t-windows-conclusion-device
Hope this information helps. Response with status so that we can help you.
-
Two hp 17-inch workstations mobile (business) Z book 17
On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.
On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.
I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external. And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.
These are the pop ups that appear for each when displaying of readers by opening my computer:
When left click hard disk drive a pop up appears with the title bar: location is not available.
H:\ is not accessible.
Access is denied.
Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)
The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security
By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.
I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash? Or is there another problem? If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8? Are all usb ports do not or all drivers of failing or is it a software problem all?
I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.
Then I went to the flash drive.
Left click on the flash drive produces a pop-up with title bar G:\
You don't have permission to access this folder.
Click on continue to get permanent access to this folder.
After clicking on continue it opens another pop-up with title bar G:\
You have been denied permission to access this folder.
To access this folder, you will need to use the Security tab.
When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)
The tabs are general, tools, hardware, sharing, ReadyBoost, customize
He did not indicate what to do next.
Summary:
Two new computers hp zbook stations mobile work with win 7 pro
Or computers with their multiple ports usb allows to access my external hard drive or flash drive.
The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.
How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?
I have so far done the following:
(1) run administrative guest with sfc/scannow and it found no violations of integrity
(2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/
(3) contacted HP support
(4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation
(5) updated drivers using HP support assistant on each computer
(6) windows update the device HP support assistant on each computer
How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?
How can I access my files on the external hard disk and flash the mobile workstation book z?
The specifications for the mobile workstation of zbook are:
Operating system: Windows 7 Professional 64-bit Service Pack 1
Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz
Moemory system: 16 GB of memory on 2 1600 MHz dimm
Graphics device 1: Nvidia Quadro K3100M
Graphics device 2: Intel HD 4600 graphics card
Hard drive 1: SCSI Disk Device
C: 683.42 (613,62 free go-go)
D: 12.21 GB (1,3 GB free)
E: 1.99 GB (1.97 GB free)
The hard drive is a seagate 1 TB drive that works very well
The flash drive is a 1 GB drive which works very well
Here is the new mobile workstations HP Z book 17.
Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed
HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives
These two mobile workstations have problems of USB port with all the ports on each computer?
These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?
What does do to be able to back up files on a disk external hard drive internal?
Have to do to be able to use flash dirves with a 17 mobile workstation z book?
This problem has been resolved.
The book of Z 17 HP installed their software: HP Client Security.
This software prevents the use of external hard drives and flash drives in its default settings.
Each customer is on their own in discoverinv and the resolution of this problem.
There is no warning. He made no information on why a right click on a drive and checking the property do not work.
The way in which this issue has been resolved was by a clean boot process in msconfig.
When miscrosoft services were hidden items that remained were read. Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.
Whenever the hard drive or flash drive has been verified.
We were lucky that we checked to see if it was or not HP software at the beginning. This problem was caused by the default client security HP who were to refuse all USB connections.
This consumes a lot of time and was so frustrating.
On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen. The computer is about 15 days old. All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded. HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem. This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.
HP did wrong by not providing any information on the inside of this product the HP support assistant.
Here's a consumer might encounter problems:
The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed. There is a phone number, but it is a regular support, not z book mobile support or elite support. Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support. Support assistant has cat support method and the HP chat support is not trained to book support z mobile. There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book. If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work. If you choose Notepad you won't get z mobile workstation support. If you choose work center you will get no support of z book mobile workstation. Instead, you must have someone answer and then ask to be redirect to support elite. On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.
After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software. It now unfortunately produces a humming noise when parts of it are displayed. This has not yet been set.
It is the customer of HP security information:
http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDFThere was no information to reconfigure the software in the white paper.
I was able to find a user guide.
This guide was not and was not available through the HP support assistant:
http://h10032.www1.HP.com/CTG/manual/c02292692.PDF
Hope this helps all who are unable to view the files on their external hard drives and external flash drives.
The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc.. Change of Director fails also as the client security administrator HP overides too.
So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.
-
Satellite A200-AH5 CD/DVD drive does not burn any CD
I have a laptop Toshiba Satellite (A200 AH3) under Windows Vista Home Premium.
For what it's worth, there's a T2085 @ 1.73 GHz processor. It is a 32-bit operating system.
In the Device Manager when I click on the CD/DVD-Rom drives, I get CD/DVGW TSSTcorp TS-L632D ATA Device.
By clicking on this that I find that the driver is working correctly and up-to-date. I was not able to burn a CD on this system...I have not tried to burn a DVD.
I ran through all the steps to burn a CD, however, but even if he goes through the process to show the progress that each song to a playlist is burned to disc, when the disc is supposed to be finalized... nothing on the disc when I try to read, and with the exception of iTunes or another program open when I place the CD in the drive to be played absolutely nothing happens.
I tried to burn music on a CD on the desktop of my sister, and it burned fine.Then... It is not a problem with the discs.
When I took the disc to my sister had burned and placed in the disk drive on my laptop, it displays the tracks that had been burned and he played the music very well. This really threw me a loop for.
The laptop is only a year old and I can not burn anything.Unfortunately, the warranty has expired. I am desperate to get this problem fixed. I don't know if he's going to burn a DVD, but I ruined 2 boxes of CD - R discs already. After disk supposedly burned music... even if no music has been burned... the disc is ruined and must be discarded.
I'm not terribly knowledgeable about aspects of warming of the computers, so I hope you can tell me in general terminology if you answer to my problem. I really hope someone out there can advise me as to what is happening or what I should do to fix the problem.
Thanks for any help in advance!
Thank you.
Gord
CanadaHello
In your case, I recommend trying the different CD s from different manufacturers.
You should know that not all CD or DVD would be fully compatible with your internal CD/DVD drive.
In many cases no compatible CD or DVD would lead to exactly the same problems that you described in your post so trying different media!In addition, I recommend checking the Toshiba driver for a CD/DVD drive update page s firmware.
As I m not wrong not the Satellite A200-AH3 belongs to the Canadian series and you should check the Canadian page for a new firmware. Maybe a new firmware is availableLast but not least, you can switch to other burning software I m using Nero I think it s the best applications for such purposes
-
driver does not load on computer
Scan-Doctor recognizes the printer on the wireless network, but after many attempts, the driver load on computer
Please ignore my investigation that I have misquoted the kind of material involved
-
MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE
MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.
I DON'T KNOW WHAT IT IS.
I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.
IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.
HELP PLZ
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check the cables
both ends. Remove and replace, do not just tight. For laptops, you can often clean power
and contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system manufacturer
and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
CD/DVD drive does not read discs on Equium A100
My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.
Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.
Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.
If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
After phone restart the operating system will recognize and initialize the disk again.
After this review of the procedure if you can read, write the middle. -
See connection to the server does not see any source
Hello
I have a very big problem, my opinion-connection to the server does not see any computer desk-source. I had seen some sources but not all a few hours ago. At this point, I did not see the sources I so did many trys to see this source. Overall I don't have luck, and now I see no source.
The problems started with a VM Windows Server 2003 EE SP2, I need training to be deployed with a view. I have not seen this virtual machine, either I chosse linked clones or not.
The journal of the events of this virtual machine show, auto login TP Server service not started right.
I hope to have some ideas that will help me to solve this problem.
Greetings
You can use a server OS in a pool of Terminal Server services. If you want to set up a desktop computer, you will need to use a desktop supported OS. You can find operating systems supported in the Administrator's guide, http://www.vmware.com/pdf/view31_manual.pdf.
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
DVD - RAM drive does not appear in my computer (Satellite M30)
Hello
I have a rug * a DVD-RAM UJ 820 in a Satellite M30
It seems that the driver does not work and the DVD unit is not showing in my computer - the device however seems to work - I was told a solution may be to download the driver and re-install again. Any idea where I can get that? You have any other suggestions on how to fix this?Thank you
Hello
drivers are located on the download site for the driver from Toshiba:
https://EU.computers.Toshiba-Europe.com
under Support & downloads, download driversIf this does not help, look around this forum. I saw some other threads on this DVD player.
Good bye
-
Windows XP does not detect any internet at all despite the computer with the modem to work.
I recently installed Windows XP Professional on my new iMac via bootcamp. While Windows itself works fine, it won't connect to internet at all. Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal. On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed." I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.
I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac. If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!
Thank you
Daniel
Moreover, these are things I've already tried:
I've tried to manually and automatically set up an internet connection
I spoke with my ISP, the modem works fine
I have re-partitioned the hard drive and reinstalled XPThe "1394 connection" is the IEEE 1394 (FireWire) from your computer. There should be cable system and under the heading wireless connections "LAN or Internet high speed." There is no need to run the Network Setup Wizard or set up a new connection.
Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section. You may need to install the drivers for them.
-
My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
Convenience store said to click on properties Insert the diskette and
Double click on open, but when I do that it stop computer
and opens the recovery and ask for a correct diskette,Hello Tallm,
Thank you for your message. Did you get your floppy drivers of your installation diskettes? If so, go to the website of the manufacturer of your computer and download/install the latest drivers. Please let us know if this or help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
CD/dvd drive does not not with any disk
Why my computer does not respond to any disk I insert inside
My drive does not respond to all disks I insert the DVD, CD and other drives do not react or I play on my copmputer they are hunted only what can do the
· http://support.Microsoft.com/kb/982116/en-AU
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/GP/cd_dvd_drive_problems
See if the information above solves the problem.
See you soon.
Mick Murphy - Microsoft partner
-
Vista does not recognize any disk in the disk drive
Vista crashed when I was loading photos on a cd. Since then every disc I put in - music, software, data are not recognized, it turns but no program starts automatically. If I go in via Explore and click the drive the disc turns, then I get the message "Please put in a disc. Any help gratefully received
Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Hard drive replacement, windows support, media does not support this computer?
Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank
My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank
Maybe you are looking for
-
Portege 3500 - installation of the OS
The operating system on my laptop is corrupted and whenever I try to start I get the famous blue screen saying that Windows has encountered an error and stops down to avoid any data loss. I tried to connect a CD - ROM USB drive to see if I can reinst
-
Lose control value when tabbing in digital and smooth touch navigation
The attached VI illustrates this. Run the VI, 'Digital' tab, change the value and press ENTER key. The value you have written does not appear. If you leave by clicking "stop"button, the value appears. Everyone treats this without add iterations of t
-
How to use notification with parallel thread
Hello I'm learning to use Notification for communication between threads. I still don't know how to use it. In my current project, I have a case to use it so I think I should implement this technique. This is my example I have a main sequence that I
-
an easy way to reinstall the applications after recovery
Among the biggest problems that you encounter during the reinstall of Windows on your computer is to recover all of your commonly used programs. Ninite offers you an easy way to download a large number of the most commonly used applications. The si
-
Cannot open or access the file with the invalid file name
I created a book cover in Photoshop. Somehow, I give him (or changed) to an invalid file name. Now, I can't open it, rename, copy, or access. I've invested many many hours in this project and has told my client that I would deliver the file. Now I'm