Problems with drivers Vista on Satellite M100 (PSMA1E)

Similar Questions

• Problem with the display for Satellite M100-221 driver

  In the section of the driver of this site, I can download the display driver for my SATELLITE M100 - 221 (PSMAE0).

  There are Mobile Intel 945 Express Chipset
  For Windows Vista, I can download the dirver:
  17/10/07 display driver Intel Windows Vista 7.14.10.1227

  But for Windows XP driver for ATI chipset:
  21/11/07 Display Driver ATI Windows XP 8.283

  Where can I get display driver for Intel 945 chipset for Windows XP?

  PS: Sorry for my English, I hope you can understand me =)

  Hello

  Recheck the Toshiba download page. It seems that Toshiba has seen your ad here. ;) Driver Intel is now available.

• Problem with keyboard on the Satellite L735

  (In English) I have a problem with my laptop model Satellite L735-sp3102w not use the CAPS LOCK SHIFT CTRL, x, v, m, know me how I can exclude a keyboard error or an error of configuration keyboard

  (Whenever I turn on the laptop turns on but the button Caps Lock off instantly) I hope that your help thank you

  Double post:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=70664

• Problems with drivers for laptop HP650

  Hello

  I have a problem with drivers for this model.
  I have installed windows 7 32 bit, then removed all the drivers from the official website of HP, but a problem with the two drivers, PCI SIMPLE COMMUNICATIONS CONTROLLER and CONTROLLER ASSISTED, now I can't connect to Internet, LAN or wireless internet.

  Is there a solution?

  

  Hello:

  This is the driver you need for the PCI SCC.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5225011&prodNameId=5225013&swEnvOID=4062&swLang=13&mode=2&taskId=135&swItem=ob-104656-1

  In order to find the right driver for the wireless card (since there may be one of several different model wireless cards in your notebook), go to Device Manager and click on the network controller needing drivers and display the material for her ID.

  If you don't know how to find the hardware ID, please read the info on the link below:

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Problems with drivers in Lite Touch Deployment (WinPE 6.2.9200, deploying 7 x 64 ENT)

  I'm trying to deploy Windows 7 x 64 enterprise on a laptop that is not our standard specification and ordered as only once without prior testing.

  When I have PXE boot since our deployment server, it loads boot.sdi and the trunk. WIM successfully, but I get so a mistake a network device was not a driver loaded for WinPE could not connect to the deployment server.

  Try to resolve what I have:

  > Download the appropriate Windows 8 LAN driver from the manufacturer's website

  > Imported it out-of-box drivers in MDT

  > Checked in the properties of the driver that the seller and the device listed in the error ID appear in the list of supported devices

  > Updated the deployment share

  > Imported the updated boot image to WDS

  This could not solve the problem, so I tried importing the driver directly in WDS and adding to the image manually boot. It has also failed to solve. After I installed Windows 7 manually on a disc, I have successfully installed the same driver to activate the LAN, although it is listed as a Windows 8 / 8.1 driver by the manufacturer. For me, this means that the driver is valid but I somehow do not import into the Lite Touch boot image. What can I do to make the driver to load properly?

  EDIT: See http://social.technet.microsoft.com/Forums/en-US/7562dfc5-ae02-40f0-b082-645a95b8fca3/problems-with-drivers-in-lite-touch-deployment-winpe-629200-deploying-7-x64-ent?forum=mdt

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Satellite U200-141: problem with drivers after installing Vista

  Hi all

  I just installed Windows Vista, and I'm having some problems:

  1. shortcut keys do not work (Fn + F1, f2, f3, etc does not at all).

  2 Touchpad - I have already installed driver listed it under Vista, but although I can use the touchpad, normally when you point, rattling, etc., I can't scroll. I mean, I can't set up the scroll area (it has been the right corner to scroll vertically and bottom to scroll horizontally). I checked the options of auto-scroll on IE and Firefox, and it does not work here.

  3. I don't seem to be able to install the new BIOS.

  4. the internet, play, pause, stop, etc., (embedded) buttons do not work either.

  5. I have the product recovery CD but this is for Windows XP and I don't know how to install the drivers to go from there.

  I'd appreciate any help anyone could provide.
  Thank you.

  You cannot use the notebook unique features because you have not installed the drivers VISTA required.
  And you can not install Vista drivers Vista drivers are not available at this time

  So what to do? Either you use the Vista without the additional features like buttons etc. or you use the supplied recovery CD and install XP

• Problems with drivers Win XP on a Satellite A200-1FL (PSAE06E)

  Hello
  I have problems with installation of 32-bit of Windows XP (downgrade from vista 32-bit):
  with sound, two pci devices, and the mass storage driver.
  XP install some drivers audio: codec, imported or generic controller... Don t, I know... but it doesn´t work.

  Help, please! I Don t know so much to these questions...

  > Xp installs some audio drivers: codec, imported or generic controller... I put t know... but it doesn't work.

  Have you checked the installation instruction txt file? I put t think you checked it because there you will find lines guide how to install the drivers and what installation order is important!

  I put t understand people writing anything about the drivers and the installation process and don t check existing documents and help files.

  First install everything as mentioned if the stills of problems exist, you can come back and ask for help ;)

• Satellite A200-1d(a): various problems with Windows Vista Mail

  Model: Satellite A200-1d(a)
  O/s: Windows Vista editions Home Premium more
  Background: Recommended for a parent, now transformed into 'support harassment ".

  The behavior of Windows Mail is displayed is non-standard and unreliable, for example:

  Creating new folders local they are initially displayed in the list of folders (left sidebar), if the mail is restarted they disappear and reappear only if they are selected after clicking on "local folders". Other than the Inbox, local folders and the Microsoft? (used for notes, etc.), all the other default folders are missing, either sent, sent, drafts box, etc.

  Another minor issue is that windows mail does not seem to recognize when the status of the internet connection changes from unavailable to available, in order to empty the Outbox and send emails, it is necessary to restart windows Messaging.

  A number of occasions, all messages disappear from your Inbox and all other folders are not available, the only solution to this problem seems to be a reboot of the laptop.

  This link seems to suggest that there is a problem with the security software which is now Norton Internet Security (configured and bundled with the laptop):
  http://forums.techguy.org/all-other-software/551829-Windows-Mail-doesn ' t-display - messages.html

  I tried to disable email inbound/outbound scanning in Norton, but it made no difference.
  Next step is to apply:

  http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm

  and then remove Norton Internet security

  Any ideas?
  Other than the foregoing the laptop is fine, looks like a problem of s/w for me.

  concerning

  Ball

  Hello

  I can't provide an exactly the solution to this problem of Vista Mail but to me, it looks like a Microsoft Vista operating system problem and not Toshiba Satellite.
  I don t think there could be a problem with the hardware that's why we should look for solutions.

  Now you will ask where a software solution? In my opinion, you should check the knowledge base Microsoft for some useful tips.
  http://support.Microsoft.com/search/
  and the solution center in Windows Vista
  http://support.Microsoft.com/windowsvista

  But first make sure that your Vista operating system is up-to-date and you have already installed all the updates and patches!

  Good bye

• Problem with Windows XP on Satellite L40-139

  Hello Toshiba user community!

  I'm new here but I'll cut right to the chase with my problem.

  I have a Toshiba Satellite L40 - 139 (PSL40E) model that was included with Windows Vista Home Premium installed and all perfectly installed software. I recently got a Windows XP Professional SP2 through MSDNA of my college (a Microsoft service for universities) and has installed because Windows Vista, although very looking shifted the laptop as hell.

  The installation went smoothly. I installed all the drivers that showed the question mark (as the display driver, audio, modem, etc.). I experienced a few problems. They are presented below as well as a few questions:

  1. I can't use the Fn function more. While Fn + F8 works, I can't turn the volume upwards or downwards using Fn + arrow up / Fn + arrow key or any other combination.

  2. the display driver although it shows that it is perfectly installed it seems that it is not.
  a. I do not have the optino of display properties when I right click on the desktop.
  b. I recently installed Gothic I, who had previously worked on my L40 and now after playing the intro, I do not see the menu. It's dark, but the sound can be heard as the navigation menu. If I manage to press new surprise of game, it's always black and sometimes it shows a random graphic error.
  I tried to install the Toshiba page display driver. And after that he has not changed a thing I downloaded one from the Intel site. Same thing!

  Do you know a sollution?

  3 another problem, although as unrelated to the laptop is the for my laptop model Toshiba download page only shows the "how to install Windows XP.pdf" file. " This is for the Windows XP operating system. If you change to Vista you get a lot of pilots. It would almost seem Toshiba would force me to HAVE Vista so that my Satellite wo works properly. Any ideas?

  4. do you know a good tutorial on how to install Windows XP for Toshiba L40 laptop? Especially for the L40 - 139 (PSL40E)?

  5. If Windows XP succeeded withought problem to see my hard drive is necessary to install the driver Toshiba mentions in his XP installation tutorial? I mean he should improve performance or not?

  Thank you in advance,
  I will adjust your answers tomorrow!

  Best regards!

  Robert Mocanu

  Hi Robert,.

  I think that there is no such thing as a tutorial for installing Windows XP on your machine. But you can count the installation instructions provided on the page to Toshiba, because WinXP installation is all about good pilot order.

  Have you tried to select as model number short "all"? You can find many drivers and I am sure that these will work very well for your laptop.
  I'd say reinstall with the Toshiba page display drivers and try again. And install the latest version of direct X 9.

  OK, Gothic I is not a new game, but worth a try anyway.
  Ditto for the FN keys. Just follow the installation instructions and download and run driver configurations.

• Problem with Chicony camera on Satellite A200

  Hello

  I reinstall Windows Vista on my A200 PSAE6E
  Windows SP1 update
  and installed the drivers of all the

  I have a strange problem with my cam.
  When I start with the blue led camera assistant software shines, I can see an image (the image is not clear) for 10-20 seconds and then everything is black.
  I removed the camera assistant software and install again, but its still the same
  Device Manager showing me that everything is ok with Chicony USB 2.0 Camera

  Can anyone give a suggestion that do I do?

  Thank you very much

  You must install all the Vista updates... and I mean all THE Vista out!
  Then update the webcam software and clean the operating system using the CCleaner.

• Impossible to install the audio driver for Vista for Satellite M100-152

  Hi people,

  I have a problem with installing the audio driver for my M100 - 152 (PSMA1E). I downloaded the driver and tried to install it. At one point during the installation progress, sometimes an error message that says: "Setup does not match infFile Realtek HD Audio.
  Sound works when headphones are connected but no sound to the speakers.

  Someone at - it an idea?

  Best regards
  Hannes

  Post edited by: hannesgpunkt

  Post edited by: hannesgpunkt

  Hello

  where did you downloaded the driver? On the toshiba Web site? Maybe you should try the driver from realtek home page because they are native and absolutely clear things from other manufacturers. I think you should try "www.realtek.com" and install the driver downloaded from there, once you have uninstalled the driver for your machine.

  Welcome them

• Where are drivers Vista for Satellite M70

  Hi, guys

  Toshiba recommends vista :)
  But so far, they have not submitt a driver (vista version) for M70 series
  If there is anything new, please let know me.

  GUYS BYE

  [Edited by: admin]

  Hello

  Yes Toshiba recommends Vista with new laptops capable perhaps Vista. Your Vista M70 is capable? You have capable sticker of Vista on it?

  I M70 - 159 and there is no Vista capable sticker. Last month I installed Vista Ultimate on it and it works perfectly. Only problem I have is not enough RAM. M70 has 512 MB only and with more RAM, I am sure that Vista will work much better.

  In the end, I can say that I have a very good and positive experience with Vista and Satellite M70 - 159. Now my question: what is your problem?

• Two devices in Vista on Satellite M100-222

  Under Windows XP, a playback device has been recognized for the laptop. Sound can be heard through the computer speakers portable or you could plug in headphones and hear the sound of their share.

  Under Windows VISTA, two reading devices or "High definition Audio Device" s are recognized. One of them, when the default is actually the speaker for laptop system. The other when the default value is actually the headphone plug system.

  In other words - it can not just pass from speakers to the headphones just plugging headphones into the socket. You must also not select the correct playback device, otherwise no sound. This is not good! Help, please!

  Hello

  Your post is a little confusing
  I installed Vista on my laptop (unfortunately it s not M100) and I don t needed any reading to hear the sound of the speakers or headphones.

  As far I can understand the Satellite M100 supports 2 microphones; built-ininternal mic and external microphone jack.
  But this has nothing to do with double Audio devices high definition

  The motherboard supports a good chip Realtek ALC861. Maybe an update of the driver from the Realtek site will help you.
  If it won't help I guess it's a feature of Vista on this device and it must deal

• Touchpad problems with Windows Vista, HP Pavilion dv7

  For some time now, I had problems using the touchpad on my HP Pavilion dv7-1260 mobile.  When I press the left button of the mouse, I have the menu that is displayed when you press the right button of the mouse.  I changed the settings on a million times and I reinstalled the drivers, but nothing seems to work.  Maybe I need to change touchpad sensitivy or something, but I don't know how to do it on Windows Vista.

  Hello

  Looks like there is a problem with the hardware with the TouchPad so check with the help of HP, their online
  documentation and drivers and ask questions in the forums about isseu known with this model.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">