Keyboard on my Satellite C50-A-19 t problem

Similar Questions

• On the new Satellite C50-A-19U battery problem

  Hello

  A few days ago I bought a new notebook Satellite C50-A-19U.

  Everything works without problems, except when I unplug the power cable, the battery level goes from 100% to 50% both.

  If I try to charge the phone, battery load normally up to 50% and then spend 50% to 100%.

  Anyone facing this problem?

  Post edited by: tonybp

  I don't really know what may be the problem here. Try to use the battery until it will be completely empty and let it be fully charged again.

  Please watch carefully if the same happens again and send feedback.

• On the new Satellite C50-A-14W battery problem

  A few days ago, I bought Toshiba Satellite c - 50 a - 14w. The accumulator is recharged normally (at 100%), but when I plug the computer in the farm shows that 72% charged.

  This means that the battery is broken?

  Hello

  New battery needs to be calibrated in case to reach full performance.

  To calibrate the battery, you must charge the battery until the battery indicator turn green (or blue). Then disconnect the power adapter and keep the battery discharge until it is completely empty.
  This procedure should be repeated two, three times in the line.

  If the battery charge status would not be changed, even if the battery has been calibrated, you should get in touch with Toshiba authorized service provider to check or replace the battery.

• Satellite C50 - B - 11 d - keyboard and NHY keys do not work

  Hi N H key and there do not work on the keyboard, sometimes also the arrow keys does not work.
  any advise? or search and return? It s not even ages of two months and has this problem since day 1.
  Not only still used little. Very disappointing quality...

  SATELLITE C50 - B - 11 D

  >... and has this problem since the day 1
  Why wait so long? Where this problem occurs from the beginning, it is always possible to return the laptop to your local dealer and ask for replacement.

  Anyway, do last and final test. Reinstall the original recovery image and check if the problem persists. If so I think you should contact the closest service Toshiba and ask for help. Your laptop is new and its warranty valid, they will help you.

  Maybe new update BIOS, if available, may help, but first try to clarify this issue with the technicians.

• Satellite C50-A-1DV - keyboard, type multiple letters

  Hello

  I was wandering if someone can help out me.
  My laptop keeps typing additional letters.

  So when I type we'll say the word dogg. "dog", I'm frustrated
  Someone can tell me if I need to send this back to the store, or is their something I can try to solve the problem.

  Partition is an example of line I'm not such a bad speller.
  It is howw is just my laptop to type please help me because I am pulling my hair out.

  Thank you

  I am running windows 8.1

  Connect the external USB keyboard and check if the same problem of double letters appear using this external USB keyboard.

  If the symptoms of double letters will not appear with the external keyboard, the internal computer keyboard must be faulty.

  This means that the internal keyboard needs to be replaced to solve the problem.
  But if even the double letter appears using the external keyboard, then the keyboard controller (part of the motherboard) may be affected.

  Not quite sure if this could be corrected by BIOS updated, but where your BIOS is not updated, try updating the BIOS.

  Otherwise, I recommend you contact the authorized Toshiba maintainer for a control.

• Satellite C50-A-1CK double characters appear when you type

  All the
  I have a new Satellite C50-A-1CK which is perfect for my needs, EXCEPT that I get continually double characters appearing on the screen as you type which is:
  A. VERY frustrating
  (B) waste a lot of time because I have to keep correcting words to remove duplicate characters.

  Please someone know of a fix for this? It can affect any key on the keyboard, and no matter if I type slow or fast, press firmly or as light as possible.

  To check for updates to the firmware, but none is available.

  Thanks in advance!

  From my experience, that the problems of characters double have been solved by BIOS updated.
  That's why I recommend you update the BIOS (if possible)

• Special function keys not working not not on Satellite C50 - Windows 8.1

  Hello

  Please could someone help me.

  I have a Toshiba Satellite C50-A0393, I received a few months ago with already installed Windows 8.1 (64-bit). Today, I got a message saying that I had to watch the PC health, a blue message Toshiba about that the access agreement and I noticed that there are three updates that needed to be done, the only one, I remember being the Toshiba Video Player. I think that another had to do with the light of the charger?
  I do not know.

  But once I rebooted my laptop after the update I noticed that the special function keys were not working (i.e. the volume, mute, pause and play, etc..). Then, I went to the Toshiba Office help and in Control Panel and select the keyboard tab. I did as the setting for the special function mode has been selected.

  Now, when this setting is in place, some keys work but for F3, F5, F6, etc. and when I want to use special features that the volume up and down work when pressing 'Fn', but the special function mode is still selected? These two work only, not the mute or the flightmode or bluetooth, which was operating normally before the updates.

  I googled but can't find something specific to 8.1, or not covered do not upgrade to 8.1. I can't find the flashcard utility and do not want to try something where I don't know what I'm doing. How can I get these special function keys working again normally? Sorry for the long message, but I wanted to give as much information as possible.

  Thank you very much

  Melanie

  Hello

  It seems strange to me that an update of Toshiba (Toshiba Video Player, etc.) would have an impact on the key features of function.
  However, the function key (F1 - F10) can be used in combination with or without the FN key. It depends on the special function key mode.

  In case you want to use the F1 - F12 functions without the FN key, the key mode of function must be enabled (should be set to the special mode of operation)

  Full details here how it works:
  https://APS2.toshiba-tro.de/KB0/HTD2503B90001R01.htm

  Now it these buttons would not work even if pressing the FN key, then there is a problem with the software.

  First of all I would recommend allows you to set the default BIOS because this mode key function can be changed in the BIOS too.
  After this, check if the key would work. If not, reinstall
  Key feature of Toshiba utility

  And the driver for the Toshiba system

  You can also check if the essential service has not been disabled.
  Start the Task Manager and go to start a number of questions. You must activate all Toshiba apps, services and then restart.

• Satellite C50-A133 - language bar shortcut keys keep reset automatically

  Hello!

  I have a laptop Toshiba Satellite C50-A133 with 8.1 for Windows 64-bit (the system of English UK language) of the United Kingdom. So far I have not had major problems with Windows 8.1 but an annoying problem keeps coming back.

  There are currently 12 languages/installed input methods, which some I have assigned shortcuts keyboard, Ctrl + number or Ctrl + Shift + number.

  After the system boots, they work fine, but after a while becomes disabled without me aware to have done anything to turn them off. The only thing I can do is to open the menu language preferences and assign shortcuts again.

  They disappeared in the menu language of shortcut keys, specifically each shortcut that I put has changed 'None '. This happens after a while little matter what I use the computer for.

  Restart the system always back to my settings shortcuts but working with computer for a while turns them off. I use Avast, Malwarebytes, Auslogics BoostSpeed and Windows Defender regularly, as well as CCleaner at startup. I don't think it's one of these the origin of the problem, as happens when none of them scan as well. Using the Windows key + tab bar to change the input language works very well also.

  All languages are displayed and can be activated in this way. It's just the shortcut keys that keep disappearing. It is not a huge problem but can be troublesome when needing to switch between 2 or 3 languages quickly without having to scroll through all 12 of them. If someone has had this problem and is there a way to fix it?

  I have already explained this problem to Microsoft.
  They had no solution that worked and he suggested, it was a hardware problem and I need to contact Toshiba instead.

  Thank you!

  To be honest I don't know if I understand your problem, but I know first boot after laptop computer purchase, you can set the keyboard input language and that s it Mr. of course you can also change it and add some other input languages.

  To me, it seems crazy that 12 languages are available as installed services. Who did this?

  Can you please tell us how it all started? I mean I guess you use UK layout only and English as an input language. The problem with 12 languages seems crazy to me. Have you tried to change something? Have you tried to delete all the other languages?

  Hardware problem? I don't know what think of Microsoft on this issue, but there is a simple way to check this. Reinstall the original recovery image and check how it works with the factory settings.

• Can't swith FN keys on my Satellite C50-B-13D

  My new Toshiba Satellite C50-B-13D have no software to keyboard, so I can't use the FN keys... Is there a software specially for this model or family of Satellite?

  Thanks in advance

  The operating system that you want to use?

• Satellite C50 - B - 14 K - Bios problem

  Hi guys,.
  I have the satellite C50 - B - 14 K
  all I wanted is to get into the BIOS, I tyed anthing. F12, hang in there and turn back on, f2, all F but nothing
  all I want to do is change the usb boot priority

  Ty guys

  Hello, try this... Press and hold down the F2 key and then turn on computer.
  BIOS configuration utility will load.
  Set the date in the field 'system '.
  Set the time in the field 'system '.
  Press F10 and "confirm the message" will be displayed.
  Press the Enter key.
  The configuration of the BIOS will end and the computer will begin.
  I hope this helps for you to put in the bios.

• Windows 10, nvidia 930 m Satellite C50-C022 opengl error

  I bought this Toshiba - Satellite-C50-C022 with 10 64-bit windows. I can't update the drivers nvidia for the newest version. When I do all the appz I use which uses opengl, the screen goes black. I have to stay with the default drivers 347.52 with what he came. This isn't a problem with appz using direct3d as 3dmax. The problem is with opengl and new drivers nvidia on this laptop.

  Black window in lightwave
  
  Black window in modo
  

  I even downloaded the new driver from toshiba website tcm0007400h and its still does not not with opengl.
  http://www.MyToshiba.com.au/support/...download?OS=33
  

  I tried editing the registry and also disable powermizer as shown in this video
  https://www.YouTube.com/watch?v=Zt00C-HXFbA
  

  Anyone have the same problems with this laptop to win win 7, 8 or 10? Is it possible to downgrade to win 7, 8?

  I think that I will never buy an another Toshiba laptop again. My friend warned me not to do, but I just wanted to try this brand. Very poor updates and support.

• Only the C partition on the new Satellite C50-B-14Z

  Hello

  I'm not an experienced user, but I'll do my best to explain the problem.

  I bought Toshiba Satellite C50-B-14Z with 8.1 installed Windows, and when starting the system, I noticed that there is only one partition of hard drive, the C partition. When you enter the disk management, I see there are 4 basic partitions already (500 GB disk):

  -Recovery - 1 GB
  -EFI system - 100 MB
  -Recovery - 10.97 GB
  -C (boot, page file, crash dump, primary partition) - 453,57 GB

  They are all primary partitions, and I read on the forums that you can have only 4 those primary, so I can't add one more to the D partition, I would like to have.
  Possibility that I offered in "actions" is to create a virtual hard drive, but I guess that is not the same thing.
  I also read that you can create new partition if you have "unallocated" space (partition), but all 4 before indicated are those primary and not affected.

  Then, the next opportunity that I read on is to do a right-click on C and "reduce volume", and then create new partition from the rest of the space (if I understand it is good), but then I read in Windows Help:
  "When you shrink a partition, all regular files are automatically transferred to the disk to create the new unallocated space. There is no need to reformat the drive to shrink the partition. » ... "If the partition is a raw partition (that is, a lack of a file system) that contains data (for example, a database file)", reducing the partition may destroy the data. ""

  Normally, I have never tested a large part with the C partition, and now I don't know if I would destroy some system files while doing this "shrinkage" and I don't have the CD installation for the system, so I can't fix it if I ruin something.

  Please advise...

  Posted by just
  

  [So the next opportunity I haven't read is to do a right-click on C and "reduce volume", and then create new partition from the rest of the space (if I understand it right), FONTS] [/ COLOR]

  Yes, this is the right way to have more than one partition. You can define what capacity should partition C and any free space can be "convert" to the D partition.

  One last thing: don't forget to create a recovery (DVD or USB) media. It is very important to have recovery image back-up.

• Satellite C50 - update Windows questions

  Hello

  I bought a Satellite C50 windows 8 year last for my partner (who has the patience of a gnat and click on everything and nothing), when windows updates were installed on a month ago, she lost the office link, she kept flashing on and outside. She managed to access the Internet through internet Explorer tab (only for the bingo & ebay lol).

  An other recent windows update took forever to load then a failure to configure changes return messages that froze the laptop.

  Yesterday, I managed to return to the default value, all settings, after all personal preferences, I went to update the page to change the settings to apply updates before installing, and he said he had to be updated before choosing the updates!

  I'm back there again and I was wondering if there was a specific update that is causing all this trouble. Although my bank balance is looking better, I'll throw this lappy in the bin and just buy another!

  Help, please. Thanks :)

  Hello

  In general, I agree with the view of s IronMan.
  The point is that you can always set the computer laptop initial configuration using the recovery procedure.

  After this procedure the system windows will install updates from Microsoft.
  This may take some time and the unit must be restarted several times during this procedure.

  A system update will install before other updates have been installed.
  Therefore, this process could take a little longer.

  In addition, you will need to update to the latest system 8.1 Win the old Win 8.
  This can be done after have installed all updates to Win 8.
  The Win 8.1 update should be done as recommended by Toshiba.

  The complete step by step instruction can be found here:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  You will be also informed about updates of Toshiba Toshiba service station preinstalled.
  In this case, it will be very easy to get the latest version of the driver.

  I hope this helps a little

• Vodafone Huawei 3 G Dongle will not work on Satellite C50 and Win8

  Recently bought this laptop running Windows 8.
  No matter what I try, I can't do this USB 3 G Huawei Vodafone dongle to be recognized by this Toshiba laptop.

  This dongle works in all our other laptops and laptops and tablets from other brands with Windows 7 or Windows 8 is certainly not something to do with the dongle the software, he moved, drivers or the operating system.

  At a time where it is plugged into the port USB, he opens the window asking what we want to do, telling me that the port and USB controller works, but that's all that.

  When you open the Vodafone software to connect to the 3G option Connect is grayed out and no device is indicated. In other words, it is not to recognize the modem for a reason any.

  As he is OK anywhere else, it must be something to do with this Toshiba laptop.

  Any suggestions / help would be greatly appreciated.
  We have loaded other versions of the Vodafone software and it made no difference. It must be a hardware conflict problem.

  It seems that the device does not recognize the USB dongle.
  Did you test all USB ports?

  As much as I know Satellite C50-A-xxx supports 1 USB 3.0 port and 2 USB 2.0 ports
  Check all three ports.

  You can also delete all the USB controllers and hubs in Device Manager and restart the laptop. After restarting again the unit should automatically recognize the USB ports.
  Also try to disable the sleep & Charge USB in the BIOS (if available).

• Satellite C50-B00N - Internet browsers do not correctly load graphics

  Hello

  I recently bought a Toshiba Satellite C50-B00N Intel Core i5 500 GB laptop with model o. PSCLUA-00N007 to web development and design purposes.

  I was faced with poor graphic of loading in all browsers - Firefox, Chrome, Internet explorer. Some of the images and graphics on the Web site do not properly load, and they also seem to be really slow.

  Appreciate your help to solve this problem.

  Thank you
  ANU.

  Hi Anu

  It is not easy to say what the problem is here. You posted in the networking and internet category, so I have to ask if you're sure the problem described is in connection any with internet connectivity to 100%?
  Did you do some basic tests like difference between WLAN and LAN or test of connection of your device to different networks?

  For two months, I have Satellite S50 - B originally preinstalled with Win8.1 and it works perfectly. I use it at home and in my office.