upgrade of Predator g3 - 710 Zotac gtx 980ti

Similar Questions

• Acer Predator G3-710 GTX 1070 overheating

  Hey guys

  So I have an acer Predator G3-710

  • Intel Core i5-6400
  • 8 GB RAM
  • GTX 1070

  But it keeps overheating when im playing games on ultra high heat. And since there were "IceTunnel thermal system" theres no fans in the enclosure.

  A fan will simply solve this problem? The poor obvisoly can't get enough air. So her dosent system thermal iceTunnel seem to work now

  If the case has a place to install a fan, you can buy a fan that uses a molex connector for power.  But it will be always on except if you buy one with an on/off switch.  Temp could lower a bit.

  Try to use the Geforce experience to optimize your game settings.

• OptiPlex 7010 with Zotac GTX 660 Ti, no video output

  I have an Optiplex 7010.  I installed a PSU Corsair AX760i and have let it run for a week check that the upgrade has not created a new problem.

  Now, I am trying to install a Zotac GTX 660 Ti video card.  It seems that the new video card is recognized as the graphic edge generates a video signal is no longer, but there is also NO signal through connectors DVI 660 GTX.  I've checked the tension on 2 power connectors 6 pins for the video card and + 12v is here.  Any ideas?

  OK, I solved the problem.

  I had to modify the following parameters of the BIOS for the GTX 660 Ti Board to operate.

  General

  Advanced startup options

  X Enable Legacy Option ROM

  Secure boot

  Secure Boot Enable

  X disabled

  After making these two changes, the video card GTX 669 it works now.

  The video Commission works today, a new BIOS option appeared in which I allowed, as follows:

  Video

  Multi-display

  Enable multi-display x

  At this point, I have now loaded the drivers for the new graphics card and everything seems to not work as desired.

  I also noticed from another forum that he had questions about the "SERR Messages" BIOS option, it is ACTIVATED in my machine.

• This card works in my PC? GeForce® ZOTAC GTX 480 in a HP Pavilion

  Hello everyone

  I have a small question I need help with my son computers, details are below.

  Computer:
  Computer Type PC ACPI x 64
  Operating system Microsoft Windows Vista Home Premium
  Operating system Service Pack [TRIAL VERSION]
  Internet Explorer 9.0.8112.16421 (IE 9.0)
  DirectX DirectX 11.0
  CHARLIE-PC computer name
  User name Charlie
  Connection domain [TRIAL VERSION]
  Date / time 2012-10-11 / 23:18
  
  Motherboard:
  CPU type QuadCore AMD Phenom X 4 9550, 2200 MHz (11 x 200)
  Name of the motherboard Asus M2N68-(Narra3) (1 PCI, 2 PCI - E x 1, 1 PCI-E x 16, 4 DDR2 DIMM, Audio, Video, LAN, IEEE-1394)
  Motherboard chipset nVIDIA nForce 430 6150SE, AMD K10
  Memory system [TRIAL VERSION]
  DIMM1: Qimonda 64T128020EU2.5B2 1 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
  DIMM2: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  DIMM3: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  DIMM4: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  Type of Award BIOS (02/05/08)

  He wants a good graphics card for around £100 and I have my eye on this map

  GeForce® ZOTAC GTX 480 1.5 GB

  It says it is compatible with PCI or PCI 2.0 v1.1

  but as I have I can not know what PCI version he has on his Board or any model number, all I know is that there the motherboard is Asus M2N68-(Narra3) and it's HP Pavilion

  Hello:

  As far as the PCIe slot is concerned, the card should be fine.  The biggest problem I see is that if you put a much larger power supply that comes with additional PCIe power connectors that need to plug into the video card, there is no way this card will work on your PC.

  That's what worries me.

  Package contents

  ZT-40101-10 P Driver disk ZOTAC Technology demos disc User manual Mini-HDMI-HDMI adapter Adapter DVI / VGA Double 6-pin to 8-pin power cable PCIe Dual MOLEX to PCIe 6-pin power cable

  Paul

• 2356ni P6: p6 2356ni and ti, zotac GTX 750 HP it will work?

  Hey my office's hp p6 2356ni, (mini-tower case). I want to use the chart zotac gtx 750 card ti. I would like to know if these two will be comapible in terms of PCI slot, the size and power. I have a UPS with a maximum capacity of 500 will

  Thank you.

  Hello

  Please report the number of HP for your PC product. How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers. This will allow others to review your question, make suggestions and review your answers. It is usually the best way to get help.

  The 500 inverter WILL have nothing to do with the NVIDIA graphics card.  However, UPS, run time may be shortened according to the overall power load.  If the 750 replaces a higher power graph card then the operating time could be extended.

  Wil you need to open your PC and do some measuring inside.

  Not every graphics card will work in any PC.  Know what the return policy is before you buy anything.

• Acer Predator G3-710

  Acer Predator G-710 I9820

  Where can I find the documentation on the ports and connectors on the back? (Manual UM_1.0_En.pdf is not detailed enough)

  Starting on the top (back side)

  -Port HMDI, but covered with a plastic?

  -Port DP with removable plastic (ok)

  -several USB ports and audio (ok)

  -Geforce GTX960: 1 white DVI port, marked 1 (DVI-I dual link?), HMDI port and 1 DP

  -geforce GTX960 below: 1 black port marked 2 (DVI - D dual link?)

  Rgds

  Hi ddh43,

  You probably just ask a specific question to be better results from the community.

  The first ports are usually covered because everyone understands that the video card should be used and they will plug the video ports of motherboard and have less experience.

  The GTX960 takes two slots, so you should have 2 DVI, 1DP, 1HDMI in this configuration.

  Cory

• Confused about first and GTX 980Ti

  Hello

  leave me perplexed by effects of acceleration @GPU as Lumetri and cuda support first 2015,

  I update my GTX 570 to GTX 980Ti

  with GTX 570, I add a Lumetri effect to a clip and make a correction when I play back I get

  loss of images, first use 90% of the power of the GTX 570 GPU

  with the GTX 980Ti, I played the same music with the same effect of Lumetri and big no. dropped

  framework, but when I add another effect of Lumetri for the same clip I dropped frames and

  noticed that first use only 33% of the power of GTX 980Ti

  I have try other effects of GPU acceleration as the path curves, color correction 3 quick color correction RGB, luma curve, once the first reach 33% the power of GTX 980Ti the loss of images begins

  DaVinci Resolve I add several nodes of correction and amazing job with 97% of the power of GTX 980Ti

  I know that the deprecated 980Ti GPU GTX, but I also know that Quadro M6000 is recommended GPU, and both are using Maxwell GPU GM200

  Quadro M6000 is based on Maxwell GPU GM200

  GeForce GTX 980Ti comes from Maxwell GPU GM200

  Why first using only 33% of the power of 980Ti GTX?

  Is there any thing I can do to let the first using 100% of the power of 980Ti GTX?

  If I can replace GTX 980Ti Quadro M6000 will I get first with 100% of the power of Quadro M6000? and why?

  my system:

  Windows 10 company

  ASUS X 99-A

  I7 - 5820K

  16 GB of Ram

  4 x 2 TB 7200 RPM hard drive Raid 0

  GTX GPU 6 GB 980Ti

  Intensity of DeckLink Pro 4 k

  First 2015.2

  the project setting and all my clips are HD1080 50i uncompresed 10-bit

  Thank you

  Hello

  I found the answer to my question on the addition of 2 Lumetri

  "The Lumetri panel design is precisely to be a simple and easy interface that serves up and down tabs and in one case by video. What was said on the official blog of PrPro & what they said events such as the great NAB show in Las Vegas, I don't think they intend to go further with it. So "does not work" is not really applicable, it is not designed or intended for the way you want it to run. »

  Re: Lumetri: two and more the effects of Lumetri on a clip

  read the entire thread to understand the effect of Lumetri and knowing the limitation in the deal with

  Thanks to all who tried to help

• Z640: Upgraded the video card to 1070 GTX. I have to upgrade power supply?

  My Z640 has a supply of poer 925w but the power plug 6 pins only I think remaining is not enough to feed my 1070 GTX video card in use heavt. It requires care supply 2 x 8 pins and adapter I installed is not always able to provide enough power. HP chat support wasn't any help. Do I need to install a new power supply that provides power sheets 8 pin pci-e?

  @MacTheSteve, welcome to the forum.

  This is Service and Maintenance Guide for the workstation.

  I contacted StarTech to see if they would have an adapter 'Y' which had two 8-pin power connectors.  However, those that they should be the following on your motherboard or the power supply:

  StarTech Brandon: basically, there are 4 SATA power or LP4 molex.

  I believe that your diet is enough power, but simply do not have the required connectors.  At least, I don't the seen on the diagram of the motherboard.  It seems that you need to upgrade the PSU.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Upgrade to a 750ti ona K450e GTX?

  So I have the 4460 i5, 8 GB of ram and the GT 730 of the k450e version. I think the upgrade of a GTX 750ti for decent game. My computer will it support? I'm afraid that my diet is unable to support because I think it's really low.

  I use a GTX750ti on a block of power SUPPLY 240 w with no problems whatsoever - he draws on 60W.

  There is a link in my thread on a site of power calculation you can use to get an estimate of contour of the power required if your system. It depends really how much you are currently taking your power supply.

  https://forums.Lenovo.com/T5/Lenovo-E-H-K-M-Q-Y-and-ErazerX/H30-50-upgrade-graphics-card/TD-p/226775...

• In Envy 700 graphics card upgrade - 215 Intel 4600 with Geforce gtx 750 ti

  Hello

  I wonder to know - is it possible to update my system with the following specifications by adding a geforce gtx 750 ti (http://www.amazon.com/EVGA-Superclock-Dual-Link-Graphics-02G-P4-3753-KR/dp/B00IDG3IDO/ref=sr_1_2?s=e...

  Thank you!

  HP Envy 700xt desktop PC product number: F9A62AV #ABA

  I've upgraded graphics card than Geforce gtx 750 ti 2 GB and it works perfectly. The card doesn't need extra provides powe.

• Acer Predator G3-710 map mother size!

  Hello forum members. Rebuilt a large part of the area of predator and update of the RAM, SSD-disk, CPU, heatsink and fans and more but no further until I change the motherboard. Anyone who knows the size is on this motherboard G3-710.

  http://fonziebulldog.blogspot.se/2016/09/overklockade-Acer-predator-datorn-Mer.html

  Thank you very much "IronFly.

• Keyboard Predator G3-710 at startup failure

  Hello world

  I had my G3-710 4 months and so far love it until today.

  Today I got keyboard at startup failures upward on my predator keyboard and the keyboard does not light.  I tried all usb slots and it makes no difference.  If I kept Windows, he did the light upwards, but now does not only.  I plugged in a spare room and works on all ports.

  Is there a way I can definitely confirm that this is a failure of the keyboard before going through the trouble to send it back to Acer?

  See you soon

  James

  Connect your predator keyboard to another PC and check if it gives you error too (the BIOS must be set to stop on error of keyboard)

• Rendering with GTX 970 SLI or Crossfire 390 R9 or simple GTX 980Ti

  Hello.

  I used Photoshop and Illustrator for years and just getting into Premiere Pro for video editing.

  I'm from 1080 p videos and moving at 4 K later this year

  It will be mainly 3-10 min edited footage toy comments or openings.

  I read about things OpenGL and Cuda and don't know if I've got 100%.

  What would be my best option in terms of performance in the editing and rendering at the end.

  I read that first pro are now supported OpenGL and support Multi GPU. Does this mean that 390 R9 with 8 GB of each will give me the best results since the first might be able to use the 16 GB of Vram altogether?

  This is what I have so far in terms of hardware (I already bought so I'm stuck with these, with the exception of GPU)

  I7 - 4790K

  32 GB Ram Super Fury

  H100 liquid cooler

  MSI Gaming card mother 5

  AF140 3 quiet edition

  2 250 GB SSD's in RAID

  Power 1000W

  
  

  I asked the same question in other forums and ongoing people game and witch FPS that I don't care because I don't play. It's strictly for video editing and rendering.

  I hope to have better luck with the Adobe community.

  Thank you.

  Thanks for your informative reply.

  Here's what I went with and I am very happy.

  Intel Core i7 - 4790K 4.0 GHz Quad - Core Processor

  Corsair H100 92.0 CFM liquid CPU Cooler with 180 radiator + 2 X 140 mm fans

  LGA1150 card mother ATX 5 Z97 - MSI GAMING

  Kingston HyperX Fury red 32GB (4 x 8 GB) DDR3 - 1866 Memory

  2 A-data Prime Minister SP900 Pro 256 GB 2.5 "Solid State Drive

  1 Seagate Barracuda 2 TB 3.5 "7200 RPM internal hard drive

  Asus GeForce GTX 980 6 GB STRIX Ti video card

  NZXT H440 (black/red) ATX Mid Tower Case

  Cooler Master Silent Pro M2 720W 80 + Bronze

  I didn't do anything yet and I did do a comparative analysis.

  I'll do that soon.

  I think that the only thing I want to do is drive add HARD m2 on the motherboard to increase the speed of loading.

  I'll upgrade the basic components and add another graphics card when I go 4K on my channel.

  I'm currently saving up for better camera gear and the monitor.

  I thought that the computer was expensive but 1 lens is more expensive than the PC just so I better set up.

  Thanks for your comments and good luck with what you do as well.

  Thank you.

• Acer Predator G6-710 BSOD works well after the connection, but...

  Hi I'm new to the forum.  My question is that if someone else got some error checking to restart error and if so, how to solve it.  I'll share the info I get from Whocrashed from the dmp files.  I am running windows 10.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------- Crash dump directory: C:\WINDOWS\Minidump

  Dumps are enabled on your computer.

  Tuesday, October 4, 2016 05:25:53 GMT crashed your computer
  crash dump file: C:\WINDOWS\Minidump\100416-3984-01.dmp
  This was probably caused by the following module: iccwdt.sys (ICCWDT + 0 x 7838)
  Bugcheck code: 0xD1 (0xFFFFF80746167838, 0xFFFFF80746167838, 0x2, 0 x 8)
  Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  file path: C:\WINDOWS\system32\drivers\iccwdt.sys
  product: driver Intel® Watchdog Timer (Intel (r) WDT)
  company: Intel Corporation
  Description: driver Intel® Watchdog Timer (Intel (r) WDT)
  Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: iccwdt.sys (driver Intel® Watchdog Timer (Intel (r) WDT), Intel Corporation).
  Google search: Intel Corporation DRIVER_IRQL_NOT_LESS_OR_EQUAL

  I can't connect to my desktop and everything works normally.  But when I leave my computer alone, if I run a game or not, and no one touches, it displays a blue screen with the error above.  Does anyone have a solution?

  OK, but a week later the same problem occurred.  This time I retried the search google for anything whatsoever.  I managed to find the message with a driver who has a problem of "overclocking".  I went to the Acer website and went to the drivers.  I thought I had them all, but I missed the chipset driver.  Now, I got the BSOD when I updated and since then, I have not had a crash.  I hope that this help anyone having the same problem.  And thank you to everyone who has helped too.

• Predator G6-710 and Oculus Rift

  Anyone had success installing installation Oculus Rift VR?  I continue to run into errors during installation, and can not pass an installation. "Eyepiece has detected a hardware error that prevents you from implementing your Rift."

  I have a strong suspicion that it is USB 3.0 port associated.    When I plug the HDMI interface and 2 USB 3.0 ports are discovered and activated, yet when I go to install inside the helmet, I get this error. I tried both USB 3.0 forward ports and ports in the back without success. Same mistake. I even rebooted and Windows came up and reported 'Hang On' while it cleans an error then rebooted and material very well.

  Someone at - there one installed yet?  Let me know your thing.

  Thank you

  Well Yes. USB port problem.  Both at the front and the other on the back do not work with Oculus. I found a USB 3.0 at the back which seems to work reliably. Holy crap, this thing is amazing...