wired keyboard and mouse not recognized after sleep

Similar Questions

• Keyboard and mouse not recognized

  HP Pavilion P6620f Win 7 when I first starts the job of keyboard and mouse (for access to the bios, etc.), but as soon as Windows starts and my login screen the keyboard and the mouse do not work.  There is being able to go to both because they have lights lite on each.  I tried unplugging everything, including the power cord, and I removed the motherboard battery to try to reset it.  Nothing seems to work.

  Hello

  I want to say that you don't have to disconnect the keyboard and mouse USB while trying this process. Once you have removed the USB drivers, the computer would have to re - discover the keyboard and mouse as a new device that may have circumvented the problem. So I read your reply message and it seems that you are unable to use your mouse and keyboard in safe mode. This is due to a problem of driver at this point. So there are only a few options left at this point in time:

  1.) Perform a repair windows (not a reinstallation of the operating system), so that you can verify the integrity of your system drivers. At startup, you need to press F10, F11 or F12 to get into the system recovery.

  Repair automatic running of the recovery disk is easy. After your system starts on the recovery disk and you follow the troubleshooting | Path via the menu advanced options, you will see the screen shown in Figure Aadvanced. Among the tools available on the screen advanced options, you will see the auto repair.

  Figure a. Advanced screen, you will find four other tools that you can use to recover a damaged Windows System.

  When you select the automatic repair option, you will see the screen shown in Figure B.

  Figure B your first line of defense when it comes to recover a Windows 8 system is the automatic repair option.

  Once you launch the automatic repair, it will begin to diagnose the problem to start and you will see the screen shown in Figure C.

  Figure C in the first stage of its operation, the automatic repair will diagnose the problem.

  During this diagnostic phase, automatic repair will scan your system and analyze the different parameters of the configuration options and files system searching files corrupt or botched configuration settings. Specifically, automatic repair will look for the following issues:

  • Missing/corrupt/incompatible drivers
  • Missing/corrupted system files
  • Missing/corrupt boot configuration parameters
  • Corrupt registry settings
  • Metadata for corrupted disk (master boot record, boot sector or partition table)
  • Installation of the problematic update

  If it detects one of these types of problems, it will automatically attempt to correct them, as shown in Figure D.

  Figure D auto repair has a diagnosis of your problem starting, it will attempt to fix it.

  If the AutoFix can solve the problem, she will do without any intervention. It will then reboot the system and start normally.

  2.) backup your important data and restore complete system of the operating system.

  If you have any further questions please send me a message.

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  > Please click on Bravo, if this information was helpful >

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

• Keyboard and mouse USB freeze after sleep

  Hello

  every time my pc from sleep, I wake up the keyboard and mouse freeze and stop working. They only way to do their job is unpluging and pluging the usb cables. I use windows vista 64 - bit SP2, rx250 mouse logitech and microsoft keyboard comfort 2000. The drivers and software are later. (Downloaded from the site Web from Microsoft and Logitech).

  All the solutions for that?

  Thank you!

  Hey guys, I solved the problem with the mouse.  I have the keyboard and mouse plugged into the back.  Initially, I had the mouse and keyboard connected, in this configuration to include only the mouse was frozen.  I went there where their vertical connected to each other, that is to say the keyboard on top of the mouse on background.  that resolved the =)

• Keyboard and mouse not working not

  Keyboard and mouse not working not
  I tried to use the method of matching and again, it won't work. What should I do? Devastated and frustrated

  The same problem. Qosmio all in one PC. Also tried the instructions for pairing and the light indicates successful pairing but mouse and keyboard still does not. Can someone help please...

• Wired keyboard and mouse to my TouchSmart IQ528a

  Can I add a wired keyboard and mouse to my TouchSmart IQ528a if so where they connect?

  Hello

  Sorry me again. As mentioned above, wireless keyboard and mouse have batteries around the red circles. I can't find who they are, but I think that they are normal AAA or AA batteries, you can open and review (below):

  

  Kind regards.

• Windows 10 does not recognize the wired keyboard and mouse

  When I start windows 10 technical preview my mouse and keyboard do not work.

  they are recognized when I'm in the bios, but when it does start nothing

  keyboard and mouse wired usb

  This is the forum for Windows 7.

• Keyboard and mouse not working do not after Windows 7 installation

  Windows 7 has recently been installed on my Dell computer and now won't work neither the keyboard nor the mouse. I tried all the USB ports available without result. I have an old MacBook and the mouse works on that so I know that's not the mouse. I can't begin to solve the problem if I can't use the computer. I read the instructions on how to use a computer without a keyboard or mouse but they all say "Click on Start" How can I click if I have no keyboard or mouse? Help, please. I need my computer to the wrong House and right now it is totally useless.

  Hello Suzanne,.

  I would like to know some information about the problem so that we can help you better.

  1. have you tried to use another keyboard with Windows?
  2. What is the model number of your Dell computer?

  Thank you for details on the issue.

  I also realize the inconvenience that you are experiencing the problem of keyboard and mouse. I will definitely help you.

  Problems of mouse and keyboard can occur for the following reasons:

  -Cables are not connected properly.
  -Incorrect device settings.
  -Missing updates.
  -Corrupt or incompatible drivers.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Keyboard and mouse not working not not after resetting Windows 10

  I have a Dell Inspiron 530 on win 7 now upgraded to win10 1 to August 15. All good until a few days ago, when my wireless keyboard and mouse began paying up, keys not giving the correct characters or symbols. I found a site that offers to win 10, that I did a reset and now I have a PC that looks perfect on the monitor, but not on keyboard. I can't control or use the PC. I plugged my old KB & mouse USB but still no controls in Windows, I tried searching the keyboard and USB settings in the BIOS but can only find switches to change the speed high or low speed USB, tried two and no change. I can't find any advanced settings.

  I tried to find a way to get into safe mode to make changes, but I can't find how to do this without KB or mouse.

  I have a 2nd PC on Windows 7 is anyway to prepare a flash drive to download a fix. I have a 16 GB flash drive.

  I would appreciate any help with this problem

  Best wishes

  Dai

  Hello

  Thanks for posting your query in Microsoft Community.

  This could be due to problem of incompatibility with the keyboard and mouse drivers. I suggest you use another computer and download the latest compatible keyboard/mouse drivers with the latest operating system (Windows 8.1 is). Download the drivers in the flash player and then install the same drivers in Windows 10 machine and check.

  If the problem persists, install the same driver in compatibility mode for an earlier version of Windows.

  a. do the driver installation file right click and select Properties and then tap or click on the compatibility tab.

  b. check in the run this program in compatibility mode for: box.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  d. try to install the driver and verify.

  Please refer to: make programs more compatible with this version of Windows (information is good for Windows 10 institutions)

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• keyboard and mouse not working not properly after installing Windows 8.1

  I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the system is restarted. Numbers on the keyboard stopped typing and letters were capitalized when the caps lock was turned off and the numbers at the top will only type the symbol above the numbers.

  I looked at this problem and it seems that I have to enter in the settings of the UEFI and disable the Intel XHCI mode. When I enter the settings of UEFI, I can't make any selection in the start menu. My keyboard and mouse stop working.

  Any suggestions?

  Thanks for posting a reply. Fortunately, I didn't have to try your solution because the computer solve itself.

• PowerEdge 840: USB keyboard and mouse not working not.

  Hello everyone.

  Yesterday, I pursached a used Dell Poweredge 840 to function as a backup server, I'm having a few problems with it but I can't understand.

  I installed the server with Windows Server 2003 x 86 edition and downloaded the drivers on the Dell site. It works perfectly, except for one problem:

  USB keyboards and mouse refuse to work.

  PS/2 works fine however, but any USB keyboard or mouse will not work.

  Flash USB drives read very well, therefore I used to recover some files on the machine before, but it was connected to the network, USB keyboard and mouse do not work.

  They are not recognized at startup and do not allow to enter the setup of the BIOS after Windows has started, that they are not always recognized. Windows displays the device as unknown device.

  I tried to boot from a live CD of 14.04 Lubuntu, in which the USB keyboard and mouse do not work either. Only PS/2 wants to work.

  I have tried different types of USB mouse:

  • Microsoft mouse
  • Acer OEM mouse
  • Mouse laser Logitech M-U0007

  None of them could work, although they work fine on my laptop, the main file server which is a model of HP and Dell Optiplex desktop computer.

  I tried a few different USB keyboards as well, but they refuse to work.

  I ended up borrowing a pair of keyboard and mouse PS/2 to configure the server, but I want it to work with my USB keyboard and mouse.

  Just for the record: the USB flash drives do not work very well, it's just the keyboard and mouse is not working.

  Anyone know how I can get there?

  Thanks in advance,

  Dominique

  Hello.

  Unplug all devices connected to the USB and PS/2 ports. Unplug the AC power cable, wait about 1 minute and then press in and hold the button for about 15 seconds. Reconnect the power and power on the server. Connect the keyboard and mouse to the USB ports and try again.

• USB devices connected through a USB 2.0 Hub Stop Responding and are not recognized after Hub reconnects

  Recently, I have this strange problem where if I connect an additional USB device to one of my USB hubs, some of my devices stop working (especially my keyboard and mouse).

  I have two hubs Generic USB connected to my motherboard. My motherboard is an ASUS Rampage II Extreme X 58 who and chips ICH10. It has 4 USB ports in the front and 6 ports on the rear panel (all USB 2.0). I also have a USB 3 controller card that is connected to one of the PCI-E card to the Board of Directors.  I have the following problems:

  1. Connect a USB device to one of my USB hubs (or one of the USB ports on the front panel) causes some of my devices to stop working (especially my keyboard and mouse that are connected via a USB hub). It seems that crashes of USB controller.  If disconnect and reconnect my HUB, windows does not recognize devices connected to this hub.
  2. Now, after the crash, if unplugging the devices connected to the hub and connect it directly to one of the ports on the front or the back of the computer, Windows instantly recognizes!

  Now I'm confused what is the cause of this problem. I had the same computer since the release of the i7 and X 58 and never had this problem (although I don't remember if I used USB hubs right there).

  Why Windows to recognise the devices connected to the hub at the beginning, but not after the crash?

  Why USB devices stop working when I connect to another USB device on my computer?

  And how do I solve this problem?

  AK

  Just a thought by the way.  If the hubs are not powered you can cause the + 5V due to the excessive number of devices not powered up to a point where it causes accidents and able to resume.

  Reduce the number of UN powered can solve this problem,

• With the help of Windows 8 with a wired keyboard and mouse which drags or lethargic

  Hello

  I list a lot on ebay. Recently my mouse and keyboard do not quickly, quite often.  They are very slow.  Letters are missed while he sits there, then appears in.  The keyboard and mouse work fine on MS Word and other applications, but it becomes very frustrating to hold intermittently not working not not back then pop.  Any help is appreciated.

  Sincerely,

  Patric

  Most likely, the problem you are having is that the system is busy on another process and that it cannot respond to the movements of the mouse. Or the system may have blocked entirely (frozen) and could answer is no longer at all.

  If you experience lag or slowless once again, try to open again (Ctrl-Shift-Escape) Task Manager then go to the Details tab of process and write it all down using lots of CPU usage %.  If you recognize the name of the process, you can take measures to put an end to this program to run (right-click on it to put an end immediately if you wish).  If you doesn't recognize, after back here and let us know and we will try to help you identify the culprit.

• MacBook Pro: Integrated keyboard and mouse not responding pluse

  I have a MacBook Pro 13 ", early 2015, installed with OS X 10.11.4.

  I use it mainly to work, with the screen closed, an external display (via Thunderport) and an Apple and change Vertical Mouse 4 - times connected via Bluetooth wireless keyboard.

  Before I get home, I open the screen, disconnect the power cord and power cord screen Thunderbolt and then close it. I leave the keyboard and Bluetooth mouse on as I leave the office.

  It works normally, but yesterday my Mac kept looking for Bluetooth devices home and would not respond to the built-in keyboard and mouse (with the exception of the switch when maintained supported 10 seconds for a forced stop). Reboot doesn't change anything and I tried to reboot with the disk (Cmd + R) utility or reset the NVRAM (Cmd + Option + P + R) and the keys did nothing. Reset SMC (Shift + Ctrl + Option + power) does not seem to do anything either.

  When I connected a keyboard Apple USB C, the keys have been recorded, but it would still find a missing mouse and go anywhere else than the screen "You are looking for a Bluetooth mouse".

  Back at work today, everything works: built-in and Bluetooth devices.

  Any suggestions?

  Update: the built-in keyboard and trackpad now don't work at all, even when Bluetooth devices are connected.

• Microsoft USB wireless keyboard and mouse stopped working after I bought another identical to another laptop that is 2 meters from the hotel

  I bought another keyboard Microsoft Wireless Comfort Keyboard and Mouse 5000 for my partner as he just got a new laptop.  I liked my as the original and has therefore whoever we decided to buy exactly the same package.  The only problem is, as I plugged my partners, my mouse and keyboard do not work.  I've tried new batteries and I tried to use the usb, but nothing works and there is no reset button on the mouse or the keyboard (that I can see anyway).

  I'm desperate to get it working.  Any suggestions please?

  Thank you

  Hello

  See the keyboard or mouse manual to locate the reset button to zero, to assistance that may help you resolve this problem.

  If you are unable to locate the reset button then, I would say to contact hardware support team.
  http://www.Microsoft.com/hardware/en-us/support

• Keyboard and mouse not response in Web based Console Redirection

  Client OS: Server WinXPSP2 Java 6 IE6: card DRAC5 PowerEdge 2950. Connection to the server based Web Redirection of the Console... okay video seem to be good. But keyboard and mouse nothing transmitted to the server... work when only direct connect keyboard and mouse to the server... Menu mode Session Option\keyboard pass trough - select check box eyebrows faq, Assistant - nothing help...