Kickstart fails on ZBook17
I try to install CEntos 5.2 on a brand new ZBook17 which has an SSD. Intel RST becomes
the way and the anaconda crashes messages:
Sie: version of untested 1.3.00 available metadata on/dev/sdb
Sie: version of untested 1.3.00 available metadata on/dev/sda
I disabled raid in the BIOS but nothing helped. Is anyway to get the kernel to ignore
paths multiple stuff?
The elite group of support, said that the only solution was to make a clear safe (2 hours) in the BIOS.
It worked.
Tags: Notebooks
Similar Questions
-
I try to install ESXi 5.5u2 via kickstart on an ISO. I added the CF and Eth drivers for the card to ISO using imagebuilder, and moves very well. If I then try to change the ISO with the kickstart file, updated the boot.cfg and isolinux.cfg, the installation will fail with the above error.
Work:
ESXi vanilla ISO, mount iso, install copy files to the directory add ks.tgz, boot.cfg, isolinux.cfg to the directory, create iso using genisoimage. Kickstart unattended installation.
Work:
ImageBuilder ISO with drivers 8242, interactive installation
Does not:
ImageBuilder iso, copy the Directory installation files, add ks.tgz, boot.cfg, isolinux.cfg to the directory, create iso using genisoimage. Kickstart unattended installation.
Once the installation fails I can go down the directory tree and confirm that there are no net_qlcn.v00 in /tardisks.
Andreas Peetz seems to have this problem with its gui customizer, but I think not that the fix posted by glroman apply here. =(
At this point, it seems that the installer is not extracting the net_qlcn.v00 for some reason any
Found the problem: my generation process used the same boot.cfg for each generation, rather than pull the boot.cfg out of the norm iso source and changes before the reconstruction of the iso.
-
Running VMware Kickstart scripts fail
I have a Linux virtual machine vmware workstation I use to run scripts to set up a USB drive as bootable vmware installation media. This works as expected.
When I do the same thing via a c# Windows forms project, the startup scripts specified to Setup vmware seems to fail. The newspapers that I'm supposed to recover via KS. CFG get never recovered, % firstboot always runs on every boot and no orders in KS. CFG never get through. Everything else works. VMWare Setup is started through Syslinux, it seems to install, /var/log/weasel.log brings nothing new. I am of ideas what could have been a lot of troubleshooting. Anyone here have any suggestions on where I should look or why running startup scripts to fail? I added sleep 30 after firstboot directive % one before running the command to restart at the end of the % firstboot section.
I did two things to solve this problem. I do not know why the error occurred creating the installation program in an environment and not in the other, but here is what fixed it:
1. in KS.cfg:
If [d ' / vmfs/volumes/NO NAME / "]; then
USBDIRECTORY = ' / vmfs/volumes/NO NAME. "
on the other
USBDIRECTORY = ' / vmfs/volumes/CONFIG ".
FI
ECHO "decided to use $USBDIRECTORY as the path to the USB device" > $LOG 2 > $LOG
The first startup script seems to fail or something similar when he is unable to carry out activities against files that should have been established of usb in the post installation script. The FAT16 partition that the post installation script is supposed to have access is supposed to be named CONFIG, but sometimes esxi maps up as NO NAME. In order to get the correct path based on name or NO NAME, I check it and store it in a variable. It is enough for the post installation and first boot scripts do what they are supposed to.
2. at the end of the first startup script, I got this:
echo "#Host configuration made! Restart... "> $FIRSTBOOTLOG 2 > $FIRSTBOOTLOG
sleep 30
reboot - n f > $FIRSTBOOTLOG 2 > $FIRSTBOOTLOG
It is now changed to sleep 180 seconds instead of 30, to ensure that all processes are made regardless of the esxi do what they are doing before starting.
I'm not sure of everything that happens in the background that it affects, but it seems to do the trick and fix my problem.
-
I am facing following error during installation of OBIEE 11.1.1.7 on Redhat linux 64 - bit version to step 14 of 15.
Any help would be appreciated.
You try to start OPMN *.
opmnctl startproc: from opmn managed the process...
================================================================================
opmn id = pdc03srv160:9501
Answer: 0 on 1 process started.
IAS = instance2 instance ID
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--------------------------------------------------------------------------------
IAS-component/process-type/process-set:
coreapplication_obiccs1/OracleBIClusterControllerComponent/BIClusterController /.
Error
-> Process (index = 1, uid = 151980586, pid = 2976)
timeout waiting for a managed process start
Journal:
None
java.lang.Exception: opmnctl task failed
at oracle.as.install.bi.biconfig.standard.OpmnctlTask.doExecute(OpmnctlTask.java:74)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Task: execution: opmnctl start coreapplication_obis1
Kind regards
Patricia.
Thanks for your reply.
My problem solved Doc below.
OBIEE 11 g: Installation of OBIEE 11 g 11.1.1.7 fails when the OBIEE components to start through Opmnctl (Doc ID 1570418.1).
Kind regards
Patricia.
-
Automatic installation with kickstart
I try to install ESXi 6 on 8 workstations with a kickstart file I have in my FTP server. My FTP server is Filezilla under windows and my firewall is disabled completely, so the FTP server is running and I'm able to download the file correctly from another linux machine. I already install ESXi in Workstation 8 without kickstart trouble-free file.
When I start my ESXi installation I specify the console startup options
> mboot.c32 - c boot.cfg ks = FTP://FTP_PASS:FTP_USER@ftpserver_ip/KS.cfg ip = 192.168.242.47 mask = 255.255.255.0 subnet gateway = 192.168.242.1
My ESXi fails and the message claims that there is no wired network interface card. Access /var/log/esxi_install.log and I can see how the boot options are mapped correctly, but after that 'network setting options for downloading media' installation is abandoned. I think that I have to specify more options, but I don't know which.
Have been check the FTP server log and it does even not any attempt to get the file.
My kickstart file is as simple as that:
vmaccepteula
rootpw $up3rPa$ $
install firstdisk - overwritevmfs
network - bootproto = dhcp - device = vmnic0
reset
I tested also exactly the same thing with ESXi 5.5 installation and it worked perfectly. Difference is that after all the files have been loaded in memory and installation process begins on the kernel to install ESXi 5.5 logs I can see that network modules are loaded in ESXi 6.0 are not.
Is there a way to specify in the line of boot of the order in which kickstart files and modules should be loaded?
Any advice would be appreciated, thanks.
I failed to make it work with kickstart on a network location. However, I placed my kickstart file on the USB boot device I use for installation by stopping the installation until it begins with SHIFT + O and adding:
> runweasel ks = usb: / ks.cfg
I know that's not the answer to the question, but there is a different path to the same place.
-
Hello
I have prepared a Kickstart file.
But I do not understand why some parts do not work.
"vim - cmd" do not work in my kickstart.
the level of the % firstboot setting is not supported anyore > as well so I think that this is the problem why vim - cmd and esxcli are not recognized.
instead of esxcli, I have used localcli now. and it works. But I can not find a local work order for vim - cmd; (.
and also the startup script do not copy him pass + esxinstall file in / tmp. do not know why.
I use the latest version of U1.
I'll attach the file.
Maybe anybode has a tip for me?
THX
Max
Hello
I have a sleep at the beginning, maybe that's the problem. Here is the part of the kickstart file that configures network settings (and also adds a vswitch)
firstboot % - interpreter = busybox
echo ' Firstboot: wait HOSTSVC.
sleep at 1 m
echo ' Firstboot: fact.#
# Configuration of DNS settings
#
echo ' Firstboot: Set DNS ".
Vim - cmd hostsvc/net/dns_set addresses ip-= [DNSSERVER]
Vim - cmd hostsvc/net/dns_set - searchdomain = "[DNSSEARCH]".
[$? - eq 0] & echo ' Firstboot: fact | echo ' Firstboot: failed.
#
# Add vmnic1 to vswitch 0
#
echo ' Firstboot: vmnic1 adds vSwitch0.
esxcfg-vswitch - L vmnic1 vSwitch0
[$? - eq 0] & echo ' Firstboot: fact | echo ' Firstboot: failed.#
#Add vMotion Portgroup to vSwitch0
#
echo ' Firstboot: Add VMotion portgroup.
esxcfg-vswitch - a VMotion vSwitch0
[$? - eq 0] & echo ' Firstboot: fact | echo ' Firstboot: failed.#
# Create vmknic for vmotion
# and assign IP
#
echo ' Firstboot: Add vmknic for VMotion.
esxcfg-vmknic - a 255.255.255.128-i [VMOTIONIP] - n Pei VMotion
Sleep 10
[$? - eq 0] & echo ' Firstboot: fact | echo ' Firstboot: failed.#
# Assign VLANS to vMotion PortGroup
#
echo ' Firstboot: Add VLAN to VMotion ".
esxcfg-vswitch - v - 20 p VMotion vSwitch0
[$? - eq 0] & echo ' Firstboot: fact | echo ' Firstboot: failed.#
# Add vmknic VMotion portgroup
#
echo ' Firstboot: Add vmknic to VMotion portgroup.
VMKNIC = $(esxcfg-vmknic-l | grep VMotion | cut-d ""-f1)
Vim - cmd/hostsvc/vmotion/vnic_set $VMKNIC
[$? - eq 0] & echo ' Firstboot: added $VMKNIC | echo ' Firstboot: failed.#
#Add new vSwitch for networks comments
#
echo ' Firstboot: Add Network vswitch vSwitch1 comments»
esxcfg-vswitch - a vSwitch1
[$? - eq 0] & echo ' Firstboot: fact | echo ' Firstboot: failed.#
#Add Teddy vmnic1 and vSwitch1 3
#
echo ' Firstboot: Add vmnic2 to vSwitch1.
esxcfg-vswitch - L vmnic2 vSwitch1
[$? - eq 0] & echo ' Firstboot: fact | echo ' Firstboot: failed.echo ' Firstboot: Add vmnic3 to vSwitch1.
esxcfg-vswitch - L vmnic3 vSwitch1
[$? - eq 0] & echo ' Firstboot: fact | echo ' Firstboot: failed.#
# Configuration of the client VLAN
# This part is different for all clusters and must be configured different for each Cluster
# [start VLAN]
esxcfg-vswitch - a vSwitch1 xxxxesxcfg-vswitch v - 33 p - xxxx vSwitch1
....
-
Oracle Identity Federation - OID RCU failed to create schema
Hello
I try to install OIF - Oracle Identity federation according to the OBE http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oif/11g/r1/oif_install/oif_install.htm
1. I installed the Oracle 11 g 2 11.2.0.3 with the charset = AL32UTF8 and db_block needed a staff of 8 K and nls_length_semantics = character creation database and listener.
2 install weblogic 10.3.6
3. start installation of IOM - Oracle, chosen identity management install and configure the option and the schema creation options.
4 installation goes fine, but when setting up, he fails. Here's the relevant part of the log.
I tried several times just to fail again. If someone would want us to enlighten as what goes wrong here. Let me know if you need more information about the configuration...
File: ...//oraInventory/logs/install2013-05-3018-01-31 AM .out_
ORA-01450: length maximum key (6398) exceeded
Completion percentage: 62
Repository creation utility: create - completion summary
Information on the database:
Host name: vccg - rh1.earth.com
Port: 1521
Service name: OIAMDB
Logged in as: sys
Prefix for schema owners (non prefixable): DEFAULT_PREFIX
RCU Logfile: /data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/rcu.log
RCU Checkpoint object: / data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/RCUCheckpointObj
Of component schemas that you created:
Status Logfile element
Oracle Internet directory is not /data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/oid.log
Repository creation utility - create: finished
Repository - Dropping and cleaning of the defective components creation utility
Fall of repository and cleaning of defective components.
Completion percentage: 93
Percentage of completion:-117
Completion percentage: 100
-RCUUtil createOIDRepository status = 2 - java.lang.Exception: the RCU failed to create schema OID
at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:792)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
____________________________________________________________________________________________________________________________________________________
File: ...///fmw/Oracle IDM1_IDP33/RCU/log/OID.log_
CREATE UNIQUE INDEX rp_dn on ct_dn (parentdn, rdn)
*
ERROR on line 1:
ORA-01450: length maximum key (6398) exceeded
Published by: 1008964 on May 30, 2013 12:10
Published by: 1008964 on May 30, 2013 12:12Change NLS_LENGTH_SEMANTICS = BYTE. and try again.
-
Install OBIEE failed on 64-bit Linux
The installation process has failed and the log shows
oracle.as.provisioning.util.ConfigException:
Error starting in the field.
Cause:
An error occurred during the start of the field.
Action:
Check the logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3179)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error starting in the field.
Cause:
From the Admin_Server has expired.
Action:
Check the logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: workflow runtime error.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
I read some posts and found that a saying is that I need to first install weblogic and then install OBIEE as software only, that is the correct step?
In fact I tried, but after installing weblogic, I chose the specific folder as Middleware House, OBIEE Installer did not recognize, he said, an application server must be already installed...
Could someone help?
Thank you!Problem solved.
The cause is that the host in/etc/hosts name contains an underscore. -
Kickstart: Local data store destroyed do not reinstall it
I noticed that when I reinstall ESXi 5 on a server already built, the previous local data store is not destroyed.
I said to make a 'install' and 'overwritevmfs '.
install - firstdisk = mptsas, local - overwritevmfs
in the upper part of the kickstart but the store of previous local data remains.
I tried to use clearpart
clearpart - alldrives - overwritevmfs
Yet the local data store of the previous generation, as well.
Part of my process of kickstart is to rename the store local data (datastore1) to a meaningful name that includes the hostname so if I reinstall, the data store rename fails (since there is no datastore1 on the 2nd install). Also, I need to know the name of the data store, as I'm checking out the files ' / ' when installing (via oem.tgz) and move before the first reboot in the section post % (or they will be gone). The only persistent location is the local data store. This also effects kickstart for resettlement syslog that goes to the local data store as well.
Suggestions on how do I delete a data store local existing during the installation (unless you delete the RAID and re-create)?
-JC
I wrote the following script to rename the local old data store ESXi 5.0 using Primo-kickstart script:
_____________________________________________________________________
AcceptEULA
#clearpart - firstdisk = cciss, local - all - overwritevmfs # removes all partitions on local drive (for G1 blade servers) but will not erase the label VMFS
clearpart - firstdisk = hpsa, local - all - overwritevmfs # removes all partitions on local drive (for G6 blade servers) but will not erase the label VMFS
install - firstdisk = hpsa, local - overwritevmfs
rootpw SECRET
reset
% include/tmp/networkconfig
% pre - interpreter = busybox
# extract information network startup
VMK_INT = "vmk0".
VMK_LINE = $(localcli réseau ip interface ipv4 get | grep "${VMK_INT}")
IPADDR = $(echo "${VMK_LINE}" | awk '{print $2}")
NETMASK = $(echo "${VMK_LINE}" | awk '{print $3}")
GATEWAY = $(esxcfg-route | awk '{print $5}')
DNS = "10.130.0.21,10.130.0.22."
Hostname = $(nslookup "${IPADDR}" | grep adresse | awk '{print $4}')
echo ' network - bootproto = static - addvmportgroup = false - device = vmnic0 - ip = ${IPADDR} - netmask = ${MASK} - gateway = ${GATEWAY} - nameserver = ${DNS} - hostname = ${HOSTNAME} "> / MC
p/networkconfig
firstboot % - interpreter = busybox
# Extract the host name of the host number
# Example: HC - moon01.tapkit .net = ' 01, sc - moon02.tapkit .net = ' 02, sc - moonNN.tapkit .net = 'NN ',.
HL ='hostname-s | WC-c"
hostNum = $(nom d'hôte-s | cut-c'expr $hl-2'-'expr $hl-1')
# Rename the local data store to something more meaningful
# Find the current local data store NAME (exclude all the SAN HSV200 data store)
DatastoreName = "$(liste étendue d'esxcli stockage vmfs |) grep ' esxcli - trainer = csv - format-param = fields = "Device, model" list of basic storage device | grep - v "HSV200". grep - v "Device". cut - d-f1' | AWK '{print $1}')'
NewDataStoreName = "datastore$ hostNum.
# Rename the data store
Vim - cmd hostsvc/datastore/rename $DatastoreName $NewDataStoreName
# copy % first startup script newspapers to persistent data store
CP /var/log/hostd.log "/ vmfs/volumes/$NewDataStoreName/firstboot-hostd.log".
CP /var/log/esxi_install.log "/ vmfs/volumes/$NewDataStoreName/firstboot-esxi_install.log".
# Needed for configuration changes that cannot be performed in esxcli (thank you VMware)
reset
_____________________________________________________________________
I hope this helps...
A big thank you to William Lam for his great contribution: http://www.virtuallyghetto.com/2011/07/automating-esxi-5x-kickstart-tips.html
Gilles Marcil
-
Hi, I installed discoverer
steps to install the discoverer
--------------------------
OS - Oracle Enterprise Linux 6.2 64bits
Download files are as follows
V18772 - 01_1of4.zip
V18772 - 01_2of4.zip
V18772 - 01_3of4.zip
V18772 - 01_4of4.zip
p13643211_111160_Linux - x 86 - 64.zip
wls1036_generic.jar
p14142550_1036_Generic.zip
checking the list of RPM with
http://docs.Oracle.com/HTML/E18558_01/fusion_requirements.htm#BABJBCAI
1036 installed WebLogic
WebLogic patched with p14142550_1036_Generic.zip
Installed the discoverer, reports, forms, Portal
V18772 - 01_1of4.zip
V18772 - 01_2of4.zip
V18772 - 01_3of4.zip
V18772 - 01_4of4.zip
patch installed p13643211_111160_Linux - x 86 - 64.zip
config.sh to configure the portal, reports, forms, discoverer
error message received when configuring
==================
The target name is: cluster_disco/cluster
< 28 February 2013 1:19:06 PM PST > < Info > < deployment J2EE SPI > < BEA-260121 > < Initiating distribute operation for application, discoverer #11.1.1.2.0 [archive: u01/applf1111/MiddleWare/prfd_binaries/discoverer/deploy/discoverer.ear], to cluster_disco. >
[Deployer: 149192] operation 'distribute' on request 'discoverer [Version 11.1.1.2.0 =]' is underway on "WLS_DISCO."
[Deployer: 149194] 'distribute' on request 'discoverer [Version 11.1.1.2.0 =]' successful on "WLS_DISCO."
[Deployer: 149194] 'distribute' on request 'discoverer [Version 11.1.1.2.0 =]' successful on "WLS_DISCO."
getMBeanServerConnection...
AdminServer connection...
try to connect to prod - app12.jha.local 7001
Successfully connected to the AdminServer...
getMBeanServerConnection...
AdminServer connection...
try to connect to prod - app12.jha.local 7001
Successfully connected to the AdminServer...
getMBeanServerConnection...
AdminServer connection...
try to connect to prod - app12.jha.local 7001
Successfully connected to the AdminServer...
getMBeanServerConnection...
AdminServer connection...
try to connect to prod - app12.jha.local 7001
Successfully connected to the AdminServer...
< 28 February 2013 1:19:09 PM PST > < Info > < deployment J2EE SPI > < BEA-260121 > < Initiating operation for application launch, discoverer [archive: null], to cluster_disco. >
[Deployer: 149193] operation 'start' on request "discoverer [Version 11.1.1.2.0 =]' failed on"WLS_DISCO"*"
[Deployer: 149034] an exception occurred for the discoverer of task [Deployer: 149026] start [Version 11.1.1.2.0 =] application on cluster_disco. :. ***
weblogic.application.ModuleException: *.
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.ApplicationDeploymentTask.execute(ApplicationDeploymentTask.java:118)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.weblogic.ASDomain.deployApp(ASDomain.java:2350)
at oracle.as.provisioning.engine.WorkFlowExecutor._deployApp(WorkFlowExecutor.java:978)
at oracle.as.provisioning.engine.WorkFlowExecutor._deployApps(WorkFlowExecutor.java:910)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:470)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Caused by: oracle.as.provisioning.util.ConfigException:
The discoverer of the Application Deployment error.
Cause:
An internal operation failed: weblogic.application.ModuleException:
Action:
Check the logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain._deployApp(ASDomain.java:2411)
at oracle.as.provisioning.weblogic.ASDomain.deployApp(ASDomain.java:2327)
... 18 more
Caused by: java.lang.Throwable: weblogic.application.ModuleException:
at oracle.as.provisioning.weblogic.ASWLDeployer.deployApp(ASWLDeployer.java:637)
at oracle.as.provisioning.weblogic.ASDomain._deployApp(ASDomain.java:2400)
... 19 more
progress to calculate progress3
progress to calculate progress3
==========================
opmnctl situation is the following
. / opmnctl status-l
Process pending: pfrd_inst_1
---------------------------------------------------------------------------------------------------------+------
IAS-component | process type. The NEST | status | UID. memutil | running time | ports
---------------------------------------------------------------------------------------------------------+------
emagent_pfrd_inst_1 | EMAGENT | 18793. Alive | 1235104352 | 106088 | 0:28:06 | N/A
RptSvr_prod-app12_pfrd_inst_1 | ReportsServerComp ~ | 18626 | Alive | 1235104351 | 106088 | 0:28:17 | N/A
Discoverer_pfrd_inst_1 | PreferenceServer | 13272 | Alive | 1235104350 | 90888 | 0:33:43 | N/A
Discoverer_pfrd_inst_1 | ServicesStatus | 13271 | Alive | 1235104349 | 11548 | 0:33:43 | N/A
webcache1 | WebCache admin | 13095. Alive | 1235104348 | 346728 | 0:33:51 | http_admin:8091
webcache1 | WebCache. 13094. Alive | 1235104347 | 894376 | 0:33:51 | http_stat:8092, http_invalidation:8093, https_listen:8094, http_listen:8090
ohs1 | SST | 12975. Alive | 1235104346 | 149264 | 0:33:58 | https:8889,https:8890,http:8888
the current state is the discoverer does not start...
The WLS_DISCO.log has the following error
# < 28 February 2013 1:27:39 PM PST > < WARNING > < HTTP > < prod - app12.jha.local > < WLS_DISCO > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JoYh02HF8D15zv9DiW1HBwj2000002 > < 1362086859473 > < BEA-101162 > < oracle.discoverer.applications.framework.ApplicationListener listener has not defined by user: java.security.AccessControlException: access denied (java.lang.RuntimePermission oracle.discoverer.connections).
java.security.AccessControlException: access denied (java.lang.RuntimePermission oracle.discoverer.connections)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:374)
at java.security.AccessController.checkPermission(AccessController.java:546)
at oracle.disco.remote.corba.SessionPooler._checkPermission (unknown Source)
at oracle.disco.remote.corba.SessionPooler.setActivationConfig (unknown Source)
at oracle.discoverer.applications.framework.ApplicationListener.initViewerActivation (unknown Source)
Published by: r_g_financials_dba on March 1st, 2013 11:43Please see if these documents help.
Discoverer 11g (11.1.1.x) does not reach 70% in the "Deployment of the discoverer" Phase [ID 1072450.1]
After application of Weblogic Patch or any CPU Patch, discoverer fails at start of Enterprise Manager (EM) [ID 1335764.1]
HTTP-500 Internal Server Error when accessing a portal Public Page portlet discoverer [ID 549216.1]
Cannot create connections of discoverer by Capi.Sh 11 g [1326729.1 ID]
Discoverer and 11.1 lance blank screen in Internet Explorer browser after reinstalled Java [ID 1359376.1]
Discoverer 11g more with Java 7 errors with java.lang.ExceptionInInitializerError [1502903.1 ID]Thank you
Hussein -
I have adjustments with a new article that I added to a kickstart file. The new article is supposed to retrieve the MAC address for vmnic0, then grep MAC address of a file to get the name of the server host and other IP addresses.
It defines the variable MAC address successfully, but other variables don't settle for some reason any. This is verified by the /etc/variables.txt file I write values in. The MAC address is in the file and followed by 4 carriage returns.So why call the variables work in the section with the echo commands, but not when it is used by setting the variables?########################## BEGIN ks.cfg ##################################vmaccepteulaAutopart - firstdisk = local - overwritevmfsinstall URLs http://PXE.ourdomain.NET/PXE/ESXi/4.1/rootpw - iscrypted 1234567 & & &network - bootproto = dhcp - device = vmnic0 - addvmportgroup = 0# Restart after installationreset# We set up some basic things when you first start the command line before adding the host to vCenterfirstboot % - not supported - interpreter = busybox# Get IP address for host InfoCD/tmp# Define variablesVMNIC0_MAC ='esxcfg-NICS - l | grep vmnic0 | AWK ' {print $7} "HOSTNAME ='grep $VMNIC0_MAC vmknic_table | AWK f «;» {' print $1' '}'IPADDR = "grep $HOSTNAME vmknic_table |" grep $HOSTNAME | AWK f «;» {' print $2' '}'VMK_VMOTION ='grep $HOSTNAME vmknic_table | grep $HOSTNAME | AWK f «;» {' print $3' '}'VMK_NFS01 ='grep $HOSTNAME vmknic_table | grep $HOSTNAME | AWK f «;» {' print $4' '}'echo $VMNIC0_MAC > > /etc/variables.txtecho $HOSTNAME > > /etc/variables.txtecho $IPADDR > > /etc/variables.txtecho $VMK_VMOTION > > /etc/variables.txtecho $VMK_NFS01 > > /etc/variables.txt# Configure the name of host, IP address, DNS servers, and gatewayVim - cmd hostsvc/net/dns_set - hostname = $HOSTNAME - domainname = ourdomain .net - ip-addresses = 10.10.10.1, 10.10.10.2 - searchdomain = ourdomain .netesxcfg-vmknic - i $IPADDR - n 255.255.255.128 "network management".esxcfg-road 10.10.10.129# Wait to make sure that everything was created and update the network stacksleep 5Vim - cmd hostsvc/net/refreshment########################## END ks.cfg ################################### BEGIN vmknic_table #.ESX01; 10.10.10.177; 10.10.11.17; 10.10.10.17; this: bf:a2:1f:12:9 hasesx02; 10.10.10.178; 10.10.11.18; 10.10.10.18; this: bf:a2:1f:12:9 besx03; 10.10.10.179; 10.10.11.19; 10.10.10.19; this: bf:a2:1f:12:9 c########################## END vmknic_table #############################Seems I have fixed my problem here.
A couple of notes:
First OFF... by setting my variables, I had a few redundant grep commands in there. Was not cause anything to fail, but just make note.
Secondly, the section 'network - bootproto = dhcp - device = vmnic0 - addvmportgroup = 0' seems to have been the culprit. I can't say exactly where it was originally my script to fail, but if you use DHCP, the server received different DNS servers that caused the script to fail. I tried to use IP addresses instead of that in my line of wget, but it still fails. The newspapers did not help to me clue as to why it is produced either. Quite bizarre.
In any case, I decided to just change the line to use a "dummy" host name and IP address, then run a change of address and hostname IP later based on the txt file that lists the IP addresses.
-
OIM 11 g Installation: server to configure IOM failed
Hello
I am facing problem in the configuration of the server of the IOM and the console Design.
Configure the server to IOM
Error
Exception has occurred by encrypting the configuration and the database
The step fails configure IOM Server
Here is the description of the error in the log file.
[2012 06-27 T 07: 46:07.015 - 07:00] [as] [TRACK: 16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] [SRC_CLASS: EncryptDataBase] [SRC_METHOD: encryptDBContent] ENTRY
[2012 06-27 T 07: 46:07.015 - 07:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] []
[OIM_CONFIG] Crypto Provider, the SUNJCE()) value
]]
[2012 06-27 T 07: 46:07.015 - 07:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] load the provider class
[2012 06-27 T 07: 46:07.015 - 07:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] get the instance of the keystore
[2012 06-27 T 07: 46:07.015 - 07:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] generate the key
[2012 06-27 T 07: 46:07.046 - 07:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] hold the key to .xlDatabasekey file
[2012 06-27 T 07: 46:07.046 - 07:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] create database connection
[2012 06-27 T 07: 46:07.046 - 07:00] [as] [TRACK: 16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] [SRC_CLASS: EncryptDataBase] [SRC_METHOD: setDBEncrypted] ENTRY
[2012 06-27 T 07: 46:07.078 - 07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] ORA-00001: unique constraint (DEV_OIM.UK_MLS_LOCALE_MLS_LOCALE_CODE) not met []
java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OIM.UK_MLS_LOCALE_MLS_LOCALE_CODE) violated
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:89)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1094)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:205)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1040)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1352)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3566)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3692)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:289)
at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:124)
at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:208)
at oracle.as.install.oim.config.OIMConfigManager.configureOIM(OIMConfigManager.java:966)
at oracle.as.install.oim.config.OIMConfigManager.doExecute(OIMConfigManager.java:538)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
]]
[2012 06-27 T 07: 46:07.078 - 07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] Exception has occurred in the updateMLSLocale method by updating the regional settings to the IOM DB []
java.lang.Exception: Exception occurred in the updateMLSLocale method by updating the locale to IOM DB
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:297)
at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:124)
at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:208)
at oracle.as.install.oim.config.OIMConfigManager.configureOIM(OIMConfigManager.java:966)
at oracle.as.install.oim.config.OIMConfigManager.doExecute(OIMConfigManager.java:538)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OIM.UK_MLS_LOCALE_MLS_LOCALE_CODE) violated
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:89)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1094)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:205)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1040)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1352)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3566)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3692)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:289)
... 13 more
]]
[2012 06-27 T 07: 46:07.078 - 07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] Exception occurred during encryption of the database []
java.lang.Exception: Exception occurred during encryption of the database
at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:138)
at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:208)
at oracle.as.install.oim.config.OIMConfigManager.configureOIM(OIMConfigManager.java:966)
at oracle.as.install.oim.config.OIMConfigManager.doExecute(OIMConfigManager.java:538)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Exception occurred in the updateMLSLocale method by updating the locale to IOM DB
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:297)
at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:124)
... 12 more
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OIM.UK_MLS_LOCALE_MLS_LOCALE_CODE) violated
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:89)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1094)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:205)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1040)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1352)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3566)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3692)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:289)
... 13 more
]]
[2012 06-27 T 07: 46:07.078 - 07:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] []
[OIM_CONFIG] Encryption of database failed.
]]
[2012 06-27 T 07: 46:07.078 - 07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JWiPympFs1WFLz7U8A1Fuljj000003, 0] Exception []
java.lang.Exception: Exception occurred by encrypting the configuration and the database
at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:213)
at oracle.as.install.oim.config.OIMConfigManager.configureOIM(OIMConfigManager.java:966)
at oracle.as.install.oim.config.OIMConfigManager.doExecute(OIMConfigManager.java:538)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Exception occurred during encryption of the database
at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:138)
at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:208)
... 11 more
Caused by: java.lang.Exception: Exception occurred in the updateMLSLocale method by updating the locale to IOM DB
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:297)
at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:124)
... 12 more
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OIM.UK_MLS_LOCALE_MLS_LOCALE_CODE) violated
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:89)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1094)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:205)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1040)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1352)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3566)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3692)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:289)
... 13 more
]]
Thanks in advance for the help.
Kind regards
PrasadYep, Prasad. But now the error has changed.
".... Lack of C:\Oracle\Middleware\user_projects\domains\oimdomain\config\fmwconfig\*.xldatabasekey *... »
Please check your $DOMAIN_HOME variable and confirm if it is part of this and if this file above is there. For example: "C:\Oracle\Middleware\user_projects\domains\oimdomain" I would say that your $DOMAIN_HOME is wrong but please check everything first and let us know.
If you confirm it's wrong, do it right the first step I told you once again and then properly set them $DOMAIN_HOME.
Kind regards
Leoncio Thiago. -
Kickstart vSphere 4 question install script...
This is probably a matter of fast command line. Search high and low looking for such a command...
Try to set the number of ports in a vSwitch from the command line. I know that this information is found in the etc/vmware/esx.conf file. I have a sed command in my kickstart file to edit the line, however, on the post installation script restart, the switch is always back to 64. It's a step manual last (outside of Manager Update running for the post update 1 patches) that I have in my server build process.
Does anyone know of anyway to do other than using the vSphere client?
You should not manually change esx.conf file, you must specify the number of ports when generating a new vSwitch, you do something like:
esxcfg-vswitch -a vSwitch:64
In my view, there are some checks at the start where the integrity of the esx.conf is checked and if it fails, it charges from an earlier copy known.
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
ESX 4 Kickstart, the disk partitioning
Hi, I'm trying to update my 'DR' (Disaster recovery) media / iso which
uses a KS.cfg in the initrd.img file to build any of our 32 blade
servers on based on the name of the Server Blade typed at the command prompt.
has worked to convert my KS.cfg to work with esx 4 using http://www.vmware.com/pdf/vsphere4/r40/vsp_40_esx_vc_installation_guide.pdf
, and changes with initramfs etc, still had some probs - so I can't see
There is a /root/ks.cfg in the system after installation manual - but when
trying to "imitate" installation using parts of this file/change script
through the manual on what is obsolete, I seem to be able to
go further now, but still, I'm still unable to start the server - I'm
pretty sure it's getting through the KS.cfg, it's simply not loading
VMkernel - it allows you to load vmnix, then bombs on 'failed to load.
VMkernel.
I suspect it's something not right on the partition, but I'm not
you don't know. It seems to be fine analyzing my KS.cfg in the initrd file
now, but unable to start for any reason any.
Here's my kickstart file:
and here's a screenshot of the initialization failed:
Matter who has any good KS.cfg partitioning examples again, or
any ideas whats going wrong here? I have not yet tried autopart either,
but it's on the list.
I also note that I can not type in the console at this breaking point so you can see, it's HP ILO2 if it matters)
Thank you!
Jamie
There is no option - chroot. There are only - nochroot. He 'chroots"default in/mnt/sysimage.
-
Hello
I installed 32 bit 11g with software mode only on RHEL 5.5 successfully. So ran the config script. She didn't walk, Executing: opmnctl start coreapplication_obiccs1. Here is the log,
You try to start OPMN *.
Execution of command *.
/ app/Oracle/middleware/instances/Instance1/bin/opmnctl startproc ias-component = coreapplication_obiccs1
***************************************************
opmnctl startproc: from opmn managed the process...
================================================================================
opmn id = rhel.localdomain:9501
0 out of 1 process started.
IAS = instance1 instance ID
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--------------------------------------------------------------------------------
IAS-component/process-type/process-set:
coreapplication_obiccs1/OracleBIClusterControllerComponent/BIClusterController /.
Error
-> Process (index = 1, uid = 606347574, pid = 10721)
Cannot start a process managed after the attempt limit maximum
Journal:
/ dev/null
java.lang.Exception: opmnctl task failed
at oracle.as.install.bi.biconfig.standard.OpmnctlTask.doExecute(OpmnctlTask.java:76)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)Hello
Check this box... can help you... Re: OBIEE 11g Cluster controller could not startThank you
Srikanth
Maybe you are looking for
-
Sierra + Magic Trackpad 2 = Force click with a single finger no longer works
Since the upgrade to Sierra, did someone else, difficulties with the Magic Trackpad 2 and using the force click to pull up definitions? If I turn it back to "tap with three fingers," it works, but is not the "click with one finger. In fact, I'm not s
-
I want to install W7 on HP15J118SO, is - it possible?
Hello I recently bought a new HP laptop, but I'm not very impressed with Windows 8 and you want to install Windows 7 instead. I wonder it is possible to find the drivers for my HP15J118SO on W7? Anyone here who knows? Nice day!
-
Portege Z30 - do you have a network icon in the taskbar?
Hi all This issue is specifically for users of Toshiba Portege Z30s. Mine does not have a network icon in the task bar, so I was wondering if another application from Toshiba is supposed to manage the network. In addition, it nothing happens when I g
-
Pavilion 140 550 - t: unable to connect to the windows service
Not sure if it's the good advice of post, but here goes. Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Wi
-
My laptop is freezing a lot, and when it works it is very slow.
Original title: cell phone problems Hello world Well, my problem is that my laptop is freezing a lot, and when it works it is very slow. I tried my best to solve the problem, in fact it's the last problem. First it was overheating and blacken, so I d