kind of question creation/still

Similar Questions

• All kinds of questions

  Hello

  I really hope someone can help!

  Here are the specs of my pc that is to have a variety of questions (or maybe the same problem?)

  Windows 7 business

  Intel Core Quad Q6600 @2. 40 GHz

  8 GB of RAM (4 gb has, implemented to date a few weeks ago)

  64 bit

  Question 1: For the last two days, when I start my pc, it freezes on Windows startup. This has happened many times before, but intermittently and not on consecutive days.

  I have to turn it off at the plug so that it could respond. This morning, it has been frozen for 40 minutes before I unplugged it. I've been through this twice, then the pc worked fine. I tried to start it in safe mode, according to the instructions on this forum, but it froze on reboot and pressing F8 did nothing. I had to turn off at the plug so that it can respond and now it works fine.

  At startup it upward for the third time, he asked a restoration, that I let him.

  Question 2: whenever I start, I have to press F1.

  Question 3: After start-up who fail, my clock back to 2007 and I have to put in the date and time.

  Question 4: a few days ago, the pc started crashing in the middle of fairly normal task (such as surf the web). I didn't have loads of tabs open or the programs that are running, only Firefox. He then started trying to load updates.

  After losing, I'd start the pc again and 20 minutes later, he would break again. Then it would be fine.

  I did a system restore after it has happened for the third time, and then it ran fine for a day.

  I have not kept an accurate account of these questions, but here's what I recorded memory.

  I had a look on the forum to see if there might be solutions. I could find those dating back to 2012, so I was wondering if there was more recent solutions.

  Thanks for any help you can give. It is much appreciated!

  Sophie

  Hi Benjamin,

  Yes, questions, said in the original post have ceased for now.

  I changed my CMOS battery and reset the defaults. The instructions here are for those who have the same problem: http://www.computerhope.com/issues/ch000239.htm

  I thought I'd give the pc a few days before coming here to comment that the problems have been resolved. For now everything works fine.

  Thank you!

  Sophie

• Question NMH300 still have time

  OK, here is a real "funny" matter of time.  After the getting set so that I COULD choose the city for my time zone, the clock of the 'system' does not change.  Select ANY city you want, the time remains the same.

  Come on now...

  Ideas?

  Avi files get streamed to the HUB are timestamped with the wrong time, but when I go to their hollow program parent on another machine, they show the correct time stamp.  If it is not essential for me, but it's VERY annoying.  There must be a way to enter and change the system.

  Concerning

  Steve

  The Media Hub must REALLY take a lot of time searching for it is 'server Time' wherever it is.  I just looked at my previous 'Africa' of the post adjustment and that he turned before 5: 00.  So I went back and set it to my timezone right and low and behold it reset with the appropriate settings.

  Now, I 'DID' go back and reinstall my software router linksys, just repair it.  May have had something to do with the "FIX."

  We'll see how long it takes...

  Concerning

  Steve

• The questions creation software from hardware

  A bit of history: it was my birthday recently, and I got a new case for my computer, which led to require a new motherboard. I reinstalled Windows 8, and he told me that my product key did not work and phone customer service with code Activation Wizard, which I did, and everything worked. I have downloaded and installed updates them, restarted my pc and it bluescreened with IRQL_NOT_LESS_OR_EQUAL, and both of my screen became black and would not turn back. Restarting my pc showed the options to enter the BIOS and various things like that, but after that, it bluescreened and the screen went black again. By raising the issue, I saw that this meant that it updates was either not valid or damaged, and the solution was to get in a cmd and make them disappear. This made me lose everything on my hard drive. It was a lack of foresight on my part, do not back up my data, but is not the main issue. I booted from the DVD drive, reinstalled Windows yet ONCE entered my product key, and it was not valid. There is no Activation Wizard to provide me with the means to call Microsoft and explain the problem, so hopefully someone here can help me. I have, ideally, would like someone to tell me what to do and if possible, solve my problem. There is no way I'll buy another product key, because it was the fault of an update from Microsoft. I don't like about the loss of data, I limit myself to my fixed windows. Thank you for reading.

  Hey Tyler,

  Try the following steps:

  (a) slide into the right edge of the screen and then click on search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click Find.)

  (b) type SLUI 04 in the search box, and then tap or click SLUI 04.

  (c) follow the instructions on the screen.

  You can try to get it again the phone activation process.

  http://Windows.Microsoft.com/en-in/Windows-8/why-activate-Windows

  Reference:

  http://Windows.Microsoft.com/en-in/Windows-8/activation-errors

  If the previous step is not enough, you need to get in touch with customer support Microsoft.

  http://support.Microsoft.com/GP/customer-service-phone-numbers?WA=wsignin1.0

  It will be useful.

• What kind of pl sql questions can you expect for a customer technical interview

  Please notify all experienced professionals
  
  What kind of questions can I expect in the customer facing interview technical I have to a PL SQL Developer with interview of performance tuning. The customer is primarily a financial project.
  
  Yes of course I would essentially tell me about the projects that you been involved in based on who they ask the questions, basically I'm not very experienced 3 years and my experience involves performance limited tuning, to develop scripts to support front-end web applications.
  
  What kind of questions (you do not need to enumerate the issues specifically, it would be useful that you could advise the areas where I should look into, all the links where I can read about the region suggest you also face a customer interview).
  Example: Financial transaction processes much as treatment so I have to prepare for any question on the changing Table, blocking.
  Also, I am aware of the Collections, external Tables. These would be discussed.
  
  Any advice would be very helpful.
  My experience does not imply strongly any financial experience and job specification does not state so I got through the 2 first interview series. It would be a disadvantage if I said that I have had no experience of finanicial, I guess just by hearing from some sources that the customer is finance.
  I would be hired only if the customer agrees, so I need to deepen as much as possible, it's time to prepare for good trying to inform.
  
  Kind regards.

  Rider wrote:

  My experience does not imply strongly any financial experience and job specification does not state so I got through the 2 first interview series. It would be a disadvantage if I said that I have had no experience of finanicial, I guess just by hearing from some sources that the customer is finance.

  Personally, when I interview candidates PL/SQL, the least important thing for me is real business knowledge. I want to rather a competent PL/SQL Developer who knows his stuff, a person having poor skills of PL/SQL and a good knowledge of the company.

  We will pay that person for PL/SQL capabilities - and not knowledge of business (that of why we have analysts and managers of project and team leaders). Remember that the code ' + financial + "is no different code" + detail + "-the same language is used. The same concepts. The same methods to solve problems. As the problems you are dealing with a level of PL/SQL are technical - where business issues have already been processed by analysts and architects at a higher level.

  I expect, however, that such a developer will resume business over time knowledge. But I don't see it as any kind of precondition.

• Questions about Windows 7 Ultimate activation.

  OT: Activation of Windows 7.

  My question is rather unusual. I see a lot of questions and answers online, what to do if you have lost your original Windows install disks, but I need to know what to do if I "lost" the computer and disks.

  The situation is that I am trying to build my own computer and he was looking through the software on the shelves to see what we had. Well, I fell on an original Windows 7 Ultimate (not OEM and not upgrade) installation disc in its original packaging, including the product key sticker. My wife thinks she may have bought it during the last thought that she could use it in the future. I don't think that it has never installed because every machine we already bought came with a version of Windows OEM, and I am sure that we would have purchased an upgrade rather than a full version of any upgrade of Windows on these machines. In any case, I am absolutely certain (probably) any computer, it may have been installed is long gone (resolved, not sold).

  Before attempting to install this on my shiny new machine, I want to know in advance what kind of questions can I meet as much as to try to activate the product on the new machine. If it has been installed and activated in the past, the computer on which it was installed is so more current usage, but will that prior activation prevent me to activate it on the new machine? If this situation arises, what should I do to convince Microsoft to inactivate it on the old computer?

  The fact that a product has been activated for a long time, does not mean that the PC, it was activated on still works.

  You would have created with Office 2013 and files installation and any key is held in the account of MS win8 on purchase which you can access at any time to reallocate your key to a new PC (commercial versions)

  Some other software manufacturers have a similar system

• Questions about Flexconnect

  Hello all,.

  I'm confused about Flexconnect.

  1. when the AP to dissociate themselves from the WLC, AP turn away from standalone mode aotomatically, right?

  2. what AP in stand-alone mode, the AP will authenticate the client itself, right?

  3. in autonomous mode, authentication information for AP store in a non-volatile memory, is this means no radius server should be used for authentication, PSK can only be used? What a new customer wants to connect a standalone AP? What is the username and password must be used for this new customer? (guess that's the first time that the client would connect to this access point.)

  4. in stand-alone mode, we should deploy the local DHCP server for the client, right?  How to avoid duplication of the IP?  given a unique IP address space for that?

  Please explain kindly above question for me, thank you.

  1. When AP disassociate to the WLC, the AP will divert to standalone mode aotomatically, right ?

  Yes

  2.when AP in standalone mode , the AP will authenticate the client by itself, right ?

  Only if your wireless network is configured with "local authentication".

  3. In standalone mode, AP store authentication information in nonvolatile memory, is that means no radius server should be used for authentication ,only PSK can be used ?How about a new client want to connect a standalone AP ? What is the username and password should be used for this new client ?(assume this is the first time the client connect to this ap. )

  No, 802. 1 X also supported. In stand-alone mode, AP himself acting as authenticator & communicate with the RADIUS server (we assume that the server RADIUS same WLC still available is down). Refer to this guide http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/ch7_HREA.html#57480 design

  4.In standalone mode ,We should deploy local DHCP server for client , right?  How to avoid IP overlapping ?  required an unique IP address space for this ?

  Generally FlexConnect, route you the traffic locally in the direction of switches. So ideal for the DHCP service locally in the branch. HTH Rasika * Pls note all useful responses *.

• Questions about Adobe CC 2015 & El Capitan

  My salary is based on the Adobe Creative Cloud products, and after that I updated (not upgraded) for OS X El Capitan I have ALL KINDS OF QUESTIONS. Illustrator all my art breaks into cubes and my workstation of creation-Pro-CC 2015 won't even launch. When I opened a video project, it says open and displays a loading bar. When it finishes loading the workspace does not appear.

  I opened a discussion on 01/10/15 with an Adobe support person, and she kindly told me that Adobe CC does not work with the beta versions and that I should get off at Yosemite. I didn't have a Time Machine for Yosemite Backup so I'm looking for a workaround solution. I'll first MANUELLEMENT SAVE all my files to an external hard shore, then use a second empty hard drive to install Yosemite.

  It is incredibly frustrating that Apple and Adobe gave no public warning on these issues, which are perform as many people. When I find a way to return to Yosemite, I'll let you know.

  Hi all, I come bearing the GOOD NEWS! It's a way to downgrade to El Capitan in Yosemite (or whatever OSX you had installed before El Capitan)

  So after a week of intensive research, I found a solution which allow me to get off at Yosemite. I also used the same technique to help the Mavericks a downgrade of El Capitan colleague (he never upgrade Mavericks Yosemite). Basically, this tutorial will help you downgrade to the OS X version that you had before you download El Capitan.

  The one caveat is that you'll need to erase your hard disk Mac (Macintosh HD). I know, it's daunting, but if you have a way to backup your computer, PLEASE do so before following these instructions. These came from an apple support thread.

  __________________________________________________________________________________________ ________________________

  If you have a Time Machine backup, you need this support page:

  https://support.Apple.com/kb/PH18848?locale=en_GB

  If this isn't the case, then you will need to make an installer of Yosemite at least 8 GB USB. (a USB3 will be a much faster).

  First download the installer for OS X 10.10 Yosemite from the Mac App Store in the shopping section (you may need to keep alt/option while clicking on purchases. Once it is downloaded, just to leave the Setup program and set the name of the file uploaded to InstallOSXYosemite.app (.app only of course, don't make no. app.app)

  1. plug your USB into the computer and open disk utility (in Applications).

  2. Select the USB in the sidebar left and click on the tab clear.

  3. Select Mac OS extended (journaled) in the format box and set the name be YosemiteInstaller

  4. now, click the Erase button and wait until the formatting process completes.

  5 tab partition and select 1 Partition menu drop-down layout Partition. Click on Option and make sure that the Table of Partition GUID is selected as the partition scheme, with its YosemiteInstaller value name.

  6. start the Terminal application (in Applications/Utilities) and copy - paste the following command in and then press ENTER:

  • sudo /Applications/InstallOSXYosemite.app/Contents/Resources/createinstallmedia--volume/Volumes/YosemiteInstaller applicationpath--/Applications/InstallOSXYosemite.app--nointeraction

  7. This will create the bootable USB key. It takes between 10-20 minutes. Do not interrupt the Terminal or eject the FlashDrive during the process. Once the process is complete, you will see the message "copy Complete. Fact. »

  The bootable OS X Yosemite USB flash drive will be ready for use, and you can start the own installation process. How to clean install OS X Yosemite on your Mac.

  8 make sure that the bootable USB is connected to your Mac, and then restart the computer. As soon as the Gong to start playing, press the Option (Alt) key.

  9 choose the USB key on the startup disk selection screen and press enter/return on the keyboard.

  10. wait until Setup of Yosemite appears on the screen. It may take a few seconds or a few minutes.

  11. click on disk utility and then click on continue.

  12. click on Macintosh HD in the left pane and then click Delete on the part at the top right of the window. Leave all settings to their default values and then click the clear bottom-right button. He will wipe away all the files stored on your hard drive to boot.

  13. when the delete process is complete, return to the first screen where you select disk utility. Now click on install OS X and then click on continue.

  14. choose the Macintosh HD partition that you deleted in step 5 and then click on install.

  Troubleshooting Guide:

  a. If you are using a flashdrive make sure it's more than 8 GB. Note that a 8 GB flash drive is actually of 7.66 concerts. I recommend a 16 gig to be sure.

  b. If you are without downgrading to the Mavericks, follow exactly the instructions above, but replace every occurrence of the word "Yosemite" with "snipers". (for example in step 3: name flash drive MavericksInstaller.app & copy and paste the following text:)

  • sudo /Applications/InstallOSXMavericks.app/Contents/Resources/createinstallmedia--volume/Volumes/MavericksInstaller applicationpath--/Applications/InstallOSXMavericks.app--nointeraction

  c. step 6/7 took about an hour and a half. Just be Patient.

  d. step 8 took a few tries, but don't give up.

  Overall, just be patient with your Mac. Let, let it do its thing. This WILL WORK. He has done for me & now I am in illustrator, Photoshop & first perfectly. It's good to be back!

• Help with a variety of questions from site Web/mobile app. (Advice and assistance)

  Hello, my cousin today asked me for help with his business. He wants a website and a mobile application for his company. Now here's the thing. I know how to create a very simple Web site. This isn't a problem. but he wants people to be able to assess the services he wants to be able to report on the Web site so they can comment, send messages, the whole nine yards. He also wants people to be able to pay via the website using norton scan security. Now, I have no idea how to do that. And did I mention that he wants an app? So I do not expect an answer, step by step the "end to end" on the creation of a Web site. To start with. Is this kind of thing, possible using programs compared to the creative clouds? Is it possible to create an app? What happened to create a way for people to pay via the website? I just want to help in being directed to the right direction in this learning experience. Then, where I start, this kind of thing is still possible? where should I go? where can I learn? ect. Any help and advice is highly appreciated and welcomed. So please if you have something to say. I'm listening.

  Thank you, the community.

  The first thing I would ask that your cousin is timeline... He asks a little... it is a great project that could have involved more than one person, especially if he wants a custom application.

  Cost would also be an important factor in accepting this type of work, how do you charge him if you don't know even how to do most of these things... As you say, you don't have any idea how to make the most of this work, and I think there's a big learning curve with some of the things he asks.

  But if he has the time and money and you have the time and practice to learn, there are cloud programs to create out there who can do whatever he wants.

• Question of 'Size' PDF

  I have a pdf file with a bunch of entries of form I'm filling with cfpdfform, but the Agency the pdf form is printed to a changed a bit, so I need to move the entries of form slightly. I have a copy of the new form and I thought I could just copy all formfields with ctrl-a and glue them on the new form, and then adjust their locations and copy and paste them into their new arrangement in my original pdf. But it seems that two PDF files are different "formats". I guess I'm not understand 'size' in the PDF files. As in a picture you can just go to the properties of the image and see the dimensions and adjust them. How can I see/adjust the dimensions so that I can arrange the formfields to fit on the form of the Agency.

  2 forms are attached. new_TOA.PDF is the blank pdf I use to fill with the formfields. TOA_103.PDF is the new form.

  Thanks in advance for any help.

  I agree. The fields on the form are on a form which is 16,83 "X 12.83", where the shape is 11 "X 8.5". In fact, you get the same results that you copied or do the replacement pages. Here are some steps to take to get the likely location you want with the file 'wrong' (the last one posted):

  1 Select this option to highlight the fields in the blue bar.

  2. many of the fields will be off the screen, so zoom back until all are visible. Then select all (EDITION). Right click on one, and then select Properties. Change the general > Orientation at 0 degrees.

  3. point by point, select a field, and place it in the approximate location and resize it as well as possible.

  4. (3) is completed and all fields are on the screen, zoom in to work out the details. Now resize and place each field if necessary.

  5. I strongly suggest that you change the letter fields and the Pat_sex to radio buttons for the much more useful results. In the Options > export value, set the O/N or M/F as the case may be. The letter field could default selection N.

  It will take time to redo all the investment and others. You should be able to do it in 3 or 4 hours. It will take probably even less time to redo the fields together. I can not give the solution option, but it should do the job. He can still be the question of the size of the font and the fact that the name of parts must be separated and is not quite clear for the user. You will need to make a lot of decisions you were going. It could also be useful if you could get the original document created from the form and print to PDF instead of using a graph. It would make a smaller and much more pleasant to my point of view form. Make sure that you embed fonts.

  I guess that you do not submit these forms anywhere. There are all kinds of questions regarding form data, drive (limited by the license) rights and related issues for use of form as you should be aware.

  I have attached copies of the partially updated forms the of your pages to replace one as well as the original with a few fields copied and then fixed to the top. I had problems with the client_id on the last of them, but that might be something I did. Hope this helps at all.

• El Capitan 10.11.4 gel/Fans questions.

  Hello everyone, first I apologize in advance for my English because it is not my first language.

  I have a new MacBook Pro retina 13 "early 2015.

  For the last 5 months, I had the OSX El Capitan 11.10.3, who came out of the box with the computer. And it has always worked perfectly.
  In the last 5 months the mac never gave me any kind of questions!
  I mainly use the computer for listening music, browsing, chatting or writing texts (using base really anything heavy)

  U - unfortunately , I have to say, a couple of days ago on the App Store, I noticed a new version of update to OSX "11.10.4" and I decided to upgrade.
  Well, after a few hours, that I've upgraded to the new version my mac started having several issues.
  All first of all Fans. Without any reason after 1 or 2 hours after the upgrade (I was just looking the open web to 2 pages in safari, especially facebook and youtube)
  Fans have started to run really crazy and loud for 3 to 4 minutes... so strong that I thought that the computer was a blast and I closed all applications and waited for slow racing fans. The aluminium of the mac was not warm to the touch... Room temperature.
  This problem happened only the first day, I upgraded. But to be honest I sometimes feel the fans that sometimes short fast and loud without no reason.

  Last but not the least... GEL! Strangely also this problem showed the same day I upgraded my macbook pro to the 11.10.4 version and this happened to me about 5 times now! and it becomes a nightmare!
  When you use the mac computer just freeze the screen (mouse is stuck without the wheel is completely freeze) and after 4/5 seconds the screen is blocked as the work stoppage trackpad haptic vibration. I tried to let the mac like that for about 10 minutes, but nothing... only a hard reset can fix this...

  The last time that happened about an hour ago, and that's why I'm here...

  I already tried to start the computer with CMD + D to Apple diagnosis and check the hardware, but it is quite well show a message "No problems found" ADP000.

  Looking at the console I saw some strange messages, but as I am not a technician I don't know what kind of problem is...

  Anyone of you knows the problems on their macs?

  First of all: you ElCapitan, but have made typos in numbers: 10.11.3 was on it and 10.11.4 is now on it (I've made the same typo always).

  Your question may be due to Spotlight indexing, but I'm not sure.

  I propose to stop the mac and

  Then start while now the keys CMD + R: it starts slowly in the recovery Partition called. Choose "install OS" in the menu: it will install OSX on what is in the mac, it leaves your only user data. You must have a consistent internet connection, because the OS is downloaded again. So it takes time, be prepared for it. After that, the mac restarts and installs. Supposed to be all "fallen"bits"are corrected.

• Question of SEH Exception occurring on windows server 2012

  Hey, partner,

  One of our client running a desktop application that is developed using .net and some 3rd party controls.

  They had updated to Windows server 2008 R2 to Windows server 2012 R2.

  And using Sql Server 2012.

  They receive the SEH exception on Terminal server environment permanently.

  They restart the server. It is not reproducible on demand.

  Is - this Microsoft provided service packs or hotfixes for this kind of questions?

  Here are the logs of the sample

  Source of the exception: System.Windows.Forms
  Exception type: System.Runtime.InteropServices.SEHException
  Exception message: external component has thrown an exception.
  Exception target site: DispatchMessageW
  -Stack trace-
  to System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW (MSG & msg)
  at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
  at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner (Int32 reason, ApplicationContext context)
  at System.Windows.Forms.Application.ThreadContext.RunMessageLoop (Int32 reason, ApplicationContext context)
  at System.Windows.Forms.Application.Run (ApplicationContext context)

  System.Runtime.InteropServices.SEHException
  External component has thrown an exception.

  Thank you

  Srinivas

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Microsoft Bluetooth Notebook Mouse 5000 question

  I've been using the Microsoft Bluetooth Notebook Mouse 5000 with my laptop Sony VAIO under Vista Home Premium for almost 6 months. A few days earlier, I was transferring a file from my laptop to my phone via bluetooth while the mouse is connected. During this operation, the cursor of the mouse began to move eradically in the branch on which I show the mouse. He was slow and jerky by following my movements. I had noticed this behavior in previous proceedings, all in my phone and pc were in communication via bluetooth. To fix this issue on all other occasions, I would be simply to disable the bluetooth mouse that had completed the transfer and then turn it back on and it will behave as expected. On this occasion I hit by mistake the detectable button on the bottom of the mouse instead of the power switch. The mouse came into discoverable mode, indicated by the alternating flashes red and green battery light, and the cursor no longer responds. Then, I turned off the mouse and turned back, waiting for his execution to return to normal. However, he was always insensitive. I tried to add the mouse using the bluetooth devices Wizard, but as Research Assistant for the devices mouse is not discovered, although it is in discovery mode. So, I fixed my drivers bluetooth supplied with the laptop, but no change. Interestingly, in the device under the mouse Manager, here's my touchpad and a hid-compliant mouse, if I don't have another mouse connected. When I turn off my bluetooth power, this device disappears from Device Manager and reappears when the power is turned back on, despite the bluetooth mouse not lit. I can still communicate with my phone via bluetooth, but not the mouse. Microsoft sent me a new mouse, but I do not expect this to solve the problem, because I think it's a software problem. Someone at - it ideas? If you would like more information, I can certainly do...

  I had the same problem the year last on a Dell XT; Ms sent me a new mouse BT 5000 and still had the issue. I gave up and updates several months later and unknown, the machine worked again. Today, I tried to use it on another laptop and worked well. I went back to my XT and the red LED flashing (detection mode) is back. Now, it will not pair with a PC. I think the problem is with the mouse it self. He becomes confused and stock in a mode that is not really "detectable" or bc no BT device cannot be found. Remove the water for long periods only resets NOT to be. I finally make it work but don't know what not solved the problem but that's what I did: disconnected (off) BT on PC, which is held to discover button mouse while turning power off, battery removed from the mouse. BT on PC has and began to search for devices of BT, replaced batt in mouse and turned on, you press on discover button mouse (PC is always looking for a device), and he appeared! I chose it and the red light stopped flashing and works well.

  Note that I tried everything back several months ago on the different versions of hosts BT running on XP pro with no luck. Now I use Win7 and this procedure was performed on a Win7 OS PC which seems to be more stable. Hope this helps someone. Sorry I could not be more specific about what is perhaps the question; I still don't know! :)

• When I scanned it using 1care, I was told there are 4 questions a 2 cannot be removed. I have Mcafee 2010 and the scan finds nothing and windows Defender is not also

  which would be theirs if they came as virus or spyware ect.

  Hello

  If she didn't say what kind of questions he couldn't take off?

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Smart response caching: HARD + SSD on Inspiron 15R drive SE, mSATA value SRT, still no button "Accelerate."

  Hello

  This is probably a common problem that has been explained earlier, but I cannot find an answer here-I found describing almost the same question, but still not the same as the son.

  So I have a cool Inspiron 15R SE with pre-installed Windows 8, 1 to HDD and SSD 32 GB on mSATA included for caching purposes. The problem is that, as far as I can see, without acceleration/cache that really happens with my SSD as just another drive.

  In the BIOS my mSATA operation is set to 'Intel Smart Response technology' which seems to be a good option for caching. Looks like on this screenshot I took from another thread, the yellow highlighted option is selected in my system:

  

  But when I boot in Windows 8 and run the Intel Rapid Storage Technology technology, I don't see "Accélération" button / tab - as if my drive is not eligible or is in the wrong mode. This is the screenshot of my Intel utility for you to see there is no option to activate the cache:

  

  If it's relevant, my SSD drive appears in my disk management console and is also available as a regular drive in Explorer and other files with a drive letter assigned managers (guess which indicates the acceleration is not in use).

  There is also a Hibernate (8 GB) on this disk partition, but there is still enough for caching (mandatory min 16 GB, 20 GB left) free space. Should I try to disable hibernation? My hiberfil.sys file is on the HARD drive so that probably won't help. Here is a screenshot of another utility pre-installed from Intel, Intel Quick Start Technology Manager, if this might be relevant:

  

  Any ideas are much appreciated, I've been strongly trying this additional disc and it was actually the main reason for me to choose this particular laptop model. It's a shame, I can't use it for some reason any.

  Thank you very much!

  I found the answer. To activate the acceleration must be no. PARTITIONS on the SSD drive even if it is still not enough allocated space.

  If the partition of QuickStart technology, with that my laptop came prevented Rapid Storage to accelerate.

  After I deleted all partitions on the disk, it worked.

  If you still need the partition of quick start or for other purposes, you can specify less space for acceleration during the installation and create your partition later.