LabVIEW controlled prosilica camera is not as fast as software prosilica own viewer, why?

Similar Questions

• Prosilica GigE GC750C Camera do not acquire images using software of NOR

  We recently had a camera Prosilica GigE to GC750C. After activating the camera, Jumbo packets is recognized and acquires images with the help of allies Sample Viewer. The camera is also recognized by the NI Vision Assistand and MAX. But trying to acquire images results in the error message attached. I would be very grateful for any help.

  Best regards

  Benjamin

  Operating system: Windows 7, 64 bit

  Firewall disabled; Jumbo packets enabled

  Allied Sample Viewer 1.24

  NEITHER Vision Assistant 2010 (build 20100621052956)

  OR Max 4.7.2

  Benjamin UB says:

  Thank you much for multiple responses.

  The AVT UniCam Version 1.1.3.0 allies and Allied SampleViewer Version 1.24 buy images correctly. This is why I can't imagine that a firewall might be interfering. Also affecting the packet size to 1500 Max only has not solved the problem. Any other ideas?

  Hi Benjamin,

  If you use a software firewall, there are actually quite a few reasons that a piece of software can acquire, but the other may not. Software can set different layers to the network stack and the behavior can be very different. In my view, both software places AVT can reach are either user-mode (in which case the firewall software can easily be configured based by application to let traffic through) or as a network filter driver based on the core (which lies below the firewall, so it is not affected by the latter). If IMAQdx, two locations, it can attach to the network stack are either in kernel mode talk to the TCP/IP stack (above the firewall) or as a driver miniport directly above the hardware and below the firewall (if you have an NI GigE Vision card or one that is compatible with the Driver OR High Performance).

  New versions of the GigE Vision standard has a new feature that make the Protocol more 'user-friendly' firewalls. Our next version of IMAQdx (which I think should be on the web every day now) has support for this new feature. We tested the new AVT cameras and it is supported as well. This should be the firewall issues such less problems.

  Eric

  Eric

• Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and IMAQ Cheers acquisition image vision module

  Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module

  Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• Can PlayMemories control several cameras AS15-HDR?

  I have a pair of Sony HDR-AS15 cameras that I use to record stereoscopic images. I have so far lacked an Android/iOS device that I could use to control the cameras on WiFi, so I could not test, but I can buy one in the near future just for that purpose. I was wondering if anyone else here has tried this?

  So the question is: can you simultaneously connect and control more than one HDR-AS15 camera via the PlayMemories application?

  If not, can we at least pair / register with more than one camera, one at a time?

  Thank you!

  After starting PlayMemories app you get on the start screen where app scans for devices and you can choose from the list on which you connect.
  If you can only connect to one device. You would need 2 smartphones for control 2 cameras.

• I cancelled all MacKeeper programs and got a refund... Now, my computer is not as fast and it freezes at the time.  MacKeeper was costing me too much money... all programs it will speed up my computer. ?

  I had problems with MacKeeper, I loved MacKeeper but then came the renewal notice.

  1 the $49.00 then update for $142,00 then another for $149.00 at the point where I was going

  be finished it would have $500.00 more... I was so upset about MacKeeper I canceled

  the whole program...   Now, my computer is not as fast and sometimes freezes... No matter what? I can do

  to speed up my Mac?  ... any help?

  If you have created a Time Machine backup before install and use MacKeeper, follow the instructions under 'All restore' in the following Apple Support document: use Time Machine to back up or restore your Mac - Apple Support.

  If you have no backup, read below.

  Recovery procedure

  Follow these instructions if uninstalling MacKeeper alone does not lead to a usable System.

  • If you have a backup that you created before using MacKeeper, now is the time to use it. To boot OS X RecoveryTime Machine in Mac OS X utility screen, select restore from a Time Machine backup. Choose a date prior to the installation of MacKeeper.
  • If you don't have a backup prior to the use of MacKeeper, create one now. To do this read to use Time Machine to back up or restore your Mac.
    • The recovery procedure require that you erase the Mac using OS X Recovery, and then create a new user account whose content will be empty. You can then use Setup Assistant to migrate your essential documents, including photos, music, products of work and other essential files.
    • To erase and install OS X read How to reinstall OS X on your Mac.
      • Follow the instructions in this document under wipe your drive and install OS X.
      • Then follow the procedure to move your content to a new Mac.
      • When asked how you want to transfer your data, select transfer from a Mac, Time Machine backup or boot disk.
      • Under Select the information to transfer, select only your previous user account and do not select 'Applications', 'Computer and Network Settings' or 'other files and folders. Deselect these choices.
    • After using Setup Assistant, you will need to reinstall the essential software that you might need, once more without forgetting to install the software from their original sources and by omitting all non-essential software.
    • "Non-essential software" is a broad category that includes, but is not limited to the products 'antivirus' third party 'cleaning' and 'maintenance '.

• X 1 carbon Gen3 touch screen camera does not

  Hello

  As in the description, I have the 3rd generation X carbon 1 with a touch screen. I have problems my camera integrated into the work. I think that I remember when I got to my laptop, but I haven't used in a while. Yestrday, I googled Hangouts to try and use the camera again, but it did not work. I continued to look for his start-up. I tried to download the latest drivers (who would never complete installation because it could not find the device). I deleted my antivirus. I disabled my ad blocker on my Chrome. Rebooted my laptop several times. I did a bunch of stuff, but nothing seemed to work. I went in the program of camera integrated by default on my laptop and it shows just a camera with an X through it, it seems that my laptop is not plugged properly or something. A way to fix it? It is a tiny little problem that I can fix it with, or is it a bigger problem at hand? Or... I'm just delusional? I never had a built-in camera?

  Open settings of Lenovo from there, you can control your camera, WiFi, Bluetooth and much more ensure under camera that the security mode is not enabled, if it is then it will not be sent the images from the camera turn off so he can send photo again since that one thing security when you use not the camera to prevent hackers / intruder to misappropriation of your camera to see what you at home so they can penetrate when nobody is home to steal things.

  If that does not fix it reboot the bios then find section i/o in the bios and make sure integrated device said he [Enabled] and not [Disabled] if there disabled that also areason why it won't work.

• Space required on target RT for LabVIEW Control design and Simulation

  Hello

  I want to run a DLL file on an RT target using LabVIEW Control design and Simulation, but I'm not sure of the required amount of RAM on the RT-target. My RT-target options are respectively cRIO 9002 and cRIO-9004 with 32 and 64 MB of RAM. Is this a sufficient amount of RAM to run the simulation? ¨¨

  Thanks in advance

  This will depend on the size of your dll, the size of the rest of the code, you can create other necessary drivers/modules, memory use when your application runs, etc.

  9002 and 9004 have not a lot of RAM on them and the minimum software installation to run a control application Design & Simulation (CD & Sim) will take around 22Mo of it (the majority of RAM available to the 9002). It would be possible to run your application on these two controllers if you keep it small but it will depend on what you want to do.

• LabVIEW code 3 error: could not load façade.

  Hello

  I was the second time the "LabVIEW code 3 error: could not load before sign.» When you use the development of LabVIEW 2009 SP1 environment.

  It's really annoying that I waste time as I have to go back to previously saved code.

  Does anyone know where it comes from and how to avoid it?

  Thank you

  Pawel

  Pawel,

  If the façade is damaged, there is little that we can really do about it. So the best thing is to make sure that the front will never get corrupted at all.

  You can write a small VI using VI Server to check the position of the element in your VI. If there is way to positions of reposition before saving the VI.

  Another reason could be much, duplication of controls (including the faulty XControls?)...

  hope this helps,

  Norbert

• Chicony usb 2.0 camera does not work when it is turned on

  During opening camera or Windows Live help software (Toshiba), the camera that is built into my laptop does not work. In Windows Live Messenger, when I try to make a video call, Windows Live Messenger stops. When I open the camera the camera assist software does not and I have no control with camera software settings.

  Hello

  I suggest you to contact the hardware vendor for assistance.

• Web camera does not, windows vista on a computer laptop toshiba a300 satellite

  I was wondering if you might know how to solve my problem.  Recently, I restarted my laptop and have had problems with the installation of Service Pack 2.  However, he miraculously installed on the computer today and once rebooted after the installation of Service pack 2, it has now in an error box "the webcam driver open fail.  "Please restart camera or computer.

  I restarted the computer and there no resolver question and I can't open or find the webcam in my control panel and can not find if the driver has been corrupted or another.  Any help would be greatly appreciated.  Thanks a lot :)

  Hi Zam,

  I suggest you to follow the steps and check if it helps.

  Method 1: Download the latest driver for your Webcam from the link and check if it helps.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Method 2: You can also try uninstalling and reinstalling the drivers of Webcam and check if that helps.

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) search of Webcam.
  (e) right click on the webcam, and then click Uninstall to remove.
  (f) restart the computer, and then reinstall the driver for the webcam.

• built in web cam does not work

  Right so my built in camera is not working, I have an advent modena m101.

  When I press fn + f7 is no function but the sign of web camera is always says the roundabout turns even now. I tried the update that it didn't work. any help will be good

  Hello

  Sound like there may be hardware problems so check with a real computer store
  (the advent of services internal) or the Support of Advent (see links below).

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to reload the drivers of the device and any camera (general control software
  included with the drivers and installed at the same time).

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
  that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL
  -REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each
  pilot.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers that are often
  older than those that you have installed. If updates suggests a pilot can HIDE and watch
  manually to see if their really is a more recent version (both system and the manufacturer of the device manufacturer
  sites).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the advent of support, their online documentation and drivers (update or reinstall),
  and their forums.

  Advent Computers - computer science daily
  http://www.adventcomputers.co.UK/everyday-computing

  Advent computers - support (Note: there are 2 pages)
  http://www.adventcomputers.co.UK/product-support

  Support of the unofficial advent - Forums
  http://www.adventsupport.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Camera does NOT work in Windows 8

  I have a laptop DELL 7000 (7537) i5 , work with windows 8, the camera, but I tried to upgrade to 10 windows, but later reinstall window but now can find my camera even not in Device Manager , although there are some other devices as

  • PCI device
  • SM Bus controller
  • Unknown device

  I also tried the permissions and some tips and tricks myself but still nothing works. I rebooted the unit again & again once, but nothing new.any help please?

  Thank you

  Hello

  Check with Dell support, their books online, the drivers/firmware, diagnostics and ask in their forums known issues. You probably just need to re - install the camera pilots.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  =====================

  Photo app and WebCams help
  http://Windows.Microsoft.com/en-US/Windows-8/Camera-App-FAQ#.

  Check with the system manufacturer, their documentation support online and drivers, and
  Ask problems known in their forums. BIOS update, chipset low level drivers and the
  leading edge device drivers. If there is no version of Windows 8, try the latest Windows 7
  versions.  Don't forget to ASK for their support and their forums because there are likely to
  be known issues.

  Need to re - install the latest available camera drivers.

  ====================================================

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ------------------------------------------------------------------------------------------------

  Translate Windows 7 to Windows 8 methods (there is little difference):

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to reload the drivers of the device and any camera (general control software
  included with the drivers and installed at the same time).

  Login as an administrator.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
  3rd party with their own software and drivers and the other main device drivers you
  a.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Tracker camera does not

  I made this a hundred times and now it does not work

  I have a clip of camera Tracker button is pushed.

  It analyses the clip and solves it.

  However does not create the small x on the screen for me to create a target and null device.

  There's nothing here?

  You need to have the camera Tracker selected in the effect controls panel, you have not turned on hide layer controls in the view menu, you must be in the Active camera view in the Composition Panel and if all this is correct, you may need to increase the size of the markers to see. A few shots to produce very small markers. If none of these suggestions, try a different shot of follow-up. If this doesn't help, try studying upward, followed by the camera by typing in the field find help in the upper right of the AE and check on the training material.

• Updated to IOS 9.3.5 camera does not work on iPhone 6 Plus

  Hi just recently, I've updated the iOS software on my iphone 6 and then I noticed that the camera does not just black screen in Meanwhile appeared when changed to video work the two camera when choose photo camera does not however any idea how to solve this problem

  You see a black screen or a closed lens

  If you see a closed lens or a black screen when you open the camera app, try the following steps:

  1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
  2. Force the application to close, then open the camera again.
  3. Restart your device, and then open the camera again.
  4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.

  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support