LabVIEW playback using TestComplete Drag option controls

Similar Questions

• Open built in the workspace Addons in LabVIEW application using the API

  I do Veristand project who uses a lot o custom code for additional features (database Custom logging, several preconfigured stimulus profile running on action of the user, custom logging datafile, customized SCADA-like display of the State of the system (pipes, valves, pumps, etc.)). On any other user of hand interface for the control of the program must be simple, because operators use (the only options, no change in operation) and similar to the previous system solution (which was HMI, touch screen with multiple monitors).

  I plan to do LabVIEW custom application for GUI which communicates with the gateway Veristand and target using API functions.

  However, I want to implement some already existing in the workspace tools in LabVIEW code, such as monitor of the alarm. There are "Open workspace tool" API functions in the labVIEW Veristand API function list. This function requires the toolpath to workspace as an argument. How can I set path for those built in the workspace tools? I'm not managing to find with the simple search.

  You may want to consider this topic

  http://forums.NI.com/T5/NI-VeriStand/open-workspace-tool/m-p/2253154

  Concerning

  -Eric

• TCS recorded video playback using video endpoint

  Hello

  I've deployed a Telepresence from Cisco Content Server (TCS 5.3) and met with problem regarding on how to play videos recorded by video endpoint.

  Under modify records, I don't see an option or the option 'Make check-in available for play on the endpoints '.

  Referring on the Administrator's guide TCS it is said that "If this box is not on the page of registration of amendment, a site Content Server Manager has not configured the prefixes necessary to an alias of reading E.164 and H.323 reading ID to communicate with a site manager for more information. What does that mean?

  And where I can configure the reading reading alias/H323 ID?

  The TCS is registered as SIP and H323 (E.164) on the control of VCS.

  Recorded content have been updated with the recording of "publish".

  Thank you very much for the help.

  Best regards

  Acevirgil

  You must do the following:

  Key 'Premium résolution' option must be installed.

  Record configuration, see the Site settings, such as 'Bridge', not 'Terminal '.

  

  Enter the prefixes to use for recording, and also for playback, it may not be the same.

  Note that prefix of reading options will be unavailable unless the resolution option key Premium is installed.

  Also note the playback using the SIP is not supported at this stage.

  /Jens

  Please rate the answers and question 'Answered' mark as appropriate.

• Automing instruments LabVIEW without using specific and coding drivers for each instrument?

  Hello

  I'm new to programming in labVIEW, but I had a few questions about its use in automation and remote controlling several instruments.

  It is an ideal software for automation of various instruments remote control/test. Assuming that I have several different companies spectrum analyzers, I understand that labVIEW drivers of instruments or special VI who would control these instruments. But if I wanted that all these spectrum analyzers to say, to display on another computer using the remote control, but I wanted to use the same program for effeciency, is it possible to do so universally for all instruments using labVIEW? Or do I have to adapt this program for each instrument to instrument drivers cause?

  If labVIEW can do that, is - anyone had good success for such scenarios in other programming languages?

  Thanks in advance for your help.

  Look for the Abstraction Layer material (that you can implement with LabVIEW, even if it's a slightly advanced topic).

  The idea of having a specific Test and be able to enforce it against different Instruments, decided at run time, is the kind of situation that LabVIEW and use of HALs was designed to facilitate.

  The concept is to 'Levels of Abstraction'.  When you create a test, you can design it for an abstract Framistan, since all the Framistans are supposed to be able to measure Vorbels in the range of 0 to 100, so you just plug a generator of Vorbel to generate Vorbels in a certain sequence of Test (linear, random, quickly, slowly, pulsatile, continuous, you decide), measure your Abstract Framistan records readings and compare with the results you expect write the results in a nice report.

  Of course, Framistat of OR uses Ethernet as the means of communication, while HP uses a serial port (depending on the model, series settings can change) and uses of the Intel one. DLL to communicate with the low-level API.  So you also need to develop, for each specific instrument, an "interface" between its API and the Framistan abstract (not everyone uses Vorbels as the input unit, for example).

  So the good news is that it can be done, the bad news is that one of the best ways of handling this type of question on the programming is to use OOP (OOP).  A number of languages (LabVIEW, C++, JAVA) support OOP, but LabVIEW might have the advantage when it comes to interact with the material.

  I you are looking for Hardware Abstraction Layer?  Add LabVIEW to the search query and you should find some nice presentations by Elijah Kerry...

  Bob Schor

• Is it possible to convert the T61 system so that it can use an infrared remote control?

  Is it possible to convert the T61 system so that it can use an infrared remote control?

  Canon and many other manufacturers of consumer electronics, provides instructions on the operation of the optional accessories in the manual of instructions for the accessory.  Manual user for the primary device will usually include a page that lists compatible accessories that are available for the device.

• I do not have a Security tab, I searched my folder option control panel and don't see any file shatr etc.

  I do not have a Security tab, I searched my folder option control panel and don't see any file shatr etc.

  Hello
  1. don't you make changes to the computer until the problem occurred?
   
  I suggest you to follow the steps below and check if it helps:
   
  Method 1: To view the Security tab: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/acl_sec_tab.mspx?mfr=true
   
   
  Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747
   
   
  Hope this information is useful.
   

• How to tell if someone uses remote adjustment to control the use of my computer?

  How to tell if someone uses remote adjustment to control the use of my computer?

  * original title - monitoring computer use *.

  Hello

  Why do you think that someone is watching your computer use? One would have to have
  loaded tracking software (trojan) on your computer or have access to the source of the network
  you use, such as cable, on your leg of it and have very sophisticated equipment.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

• How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  Hello

  You don't say which edition of Vista you are using.

  Vista Home Basic Edition does not have the "snipping tool".

  If you have a different edition of Vista, read the information on how to find it:

  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  If you have one version of Vista, other than the Home Basic edition, you already have the Snipping Tool screenshot utility: click on Start, all programs, accessories, Snipping Tool. If you do not see here, it cannot be activated. Go to the Control Panel and open programs and features (you may need to click programs first). In the left pane, click Windows turn features on or off. If necessary, click continue when you are prompted by user account control. Scroll down the list of features, check the box next to Tablet PC optional components, and click OK. Marketing of these features gives you not only the Snipping Tool, but also input panel Tablet PC, Windows Journal and other features related to the stylus.

  "Install or activate the cutting tool in Windows Vista"

  http://www.mydigitallife.info/install-or-enable-Snipping-Tool-in-Windows-Vista/

  See you soon.

• I can't view my folders using the folder options

  In my folder properties, I can check/uncheck "Read only", but the 'Hidden' attribute has a checkbox selected but grayed out and I can't view it.

  I had the virus in my system that automatically hidden my every folder in all drives.

  I open the folder and files by using the path that is iritating too.
  I can't view the folders because of the "Hidden" attribute
  Wiki also says that I should be able to disable the 'Hidden' attribute, but not on my system.
  I'm the admin and the only user of this computer.  Of course, I can 'see' the folder hidden because of the-> Folder Options Control Panel.
  Thanks a lot for any help :)

  Are you sure that the virus has been correctly removed?  Run a TDSSKiller and a Malwarebytes scan on the machine.

  This grayed out checkbox "Hidden" usually means that the file also has the "system" attribute set on it, this can be solved by using the Attrib command at a prompt (run as administrator).

  At the elevated command prompt, use the CD command to navigate to the root folder:

  cd\

  In the root folder, you can get a list of your folder with the following attributes:

  attrib /s /d

  The list will be long, it is best to redirect the output to a file:

  attrib /s /d > c:\attrib.txt

  to open the file from the command prompt just enter the path:

  c:\attrib.txt  (then )

  A peculiar quirk of the Attrib command, is that if the system and hidden attributes are defined, you need to remove both at the same time, you cannot delete one while the other exists.  To remove the hidden attribute and the system:

  attrib h s/s/d

  On the issue of the root folder this command will remove the hidden attribute and system on all folders on the disk... the problem is the attrib command automatically treats all files, so it will also remove the system attribute on all files, including all the files in the Windows directory and its subdirectories.

  That's the kind of mess that sometimes treat when dealing with viruses or other parasites such.  Another problem even worse that sometimes must be addressed due to viruses, it's permissions changed, it is sometimes difficult to know what did exactly a virus, and how the system is compromised following a infection, for these reasons administrators COMPUTER in business or enterprise environment very often consider servers or workstations reviews to be compromised beyond confidence after an infection and the only acceptable in these environments of the Mission is to flatten the box and restore an image or to rebuild the machine.

  John

• JDeveloper 12.1.2 has a problem with links when you use the data bean control

  Build JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668

  The problem that I am facing is:

  I used the data bean control to create our user interface. After that I dragged my jsff page data control, links have been created.

  I opened the XML pagedef to my page. On the Bindings tab and executable, I added a few links more by clicking on the Green plus sign. After I saved my changes, I noticed that some other links have been replaced by a link to the different executable files.

  This behavior occurs almost everytime I have edit links. Does anyone else see this problem?

  It looks like another instance of the bug described in https://java.net/jira/browse/ADFEMG-156

  This bug is fixed in 12.1.3. If you need the fix in 12.1.2 you should open a SR with support.oracle.com and ask a backport.

  Timo

• Playback of SWF loaded SWFLoader control

  I am loading a swf file into my Flex Application that I would like to control simple playback of the Flex application.  It is a test application.

  Essentially:

  I have a SWFLoaded swf with id = "swfLoader".  When I try to use the command in the click handler function...

  swfLoader.play ();  or nextFrame();   I get the error...

  Property not found on mx.controls.SWFLoader NextFrame and there is no default value.

  Do I need to import anything?  Or do you use other commands to control swf?

  Thank you.

  swfLoader.content.play)

• Qosmio F20-132: Question on the use of the remote control

  Hi ppl, I just read the manual of my laptop and I realized something that I didn't realize before

  I can use my remote control without using the "infrared adapter" using the USB connection, but it does not work inside the Win XP MCE, but I can use it to turn on my laptop and off and use other features, I will try in the future to use some other aplications with the remote control. I guess many of you guys realized it when you bought your laptop, but I said at the beginning when I opened the package ' what the hell? remote control... but I really need this adapter? Sherazade, that sucks.

  by the way someone is using the remote control with other applications (such as ahead nero, chis tv, or linux inside)?

  Hello

  I downloaded the manual for this unit, and according to the information of the remote control receiver is required if you want to use the MCE Remote control.

  In addition, remote controls USB only works with Win MCE and so cannot be used directly with Qosmio Player
  Additional some application programs can not supported control functions remotely.

• I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'View' option to fix my toolbars.

  I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'view' option to fix my toolbars. I have no idea how access toolbars without this toolbar - I can't believe this allows this toolbar to delete (I did accidentally while trying to get an another toolbar restored). Thanks for any help

  Hi toby,.

  on the assumption that you always have access to the navigation bar, right click on the stop button, when the home page is loaded and check the 'Menu Bar' option in the context menu that appears.

  If you need more help see the knowledge base article the Navigation buttons such as back, home, bookmarks and recharge are missing

  Daniel

• What function key should I use for the option about bootcamp

  Function key WWhat should I use to open option of bootcamp

  If you try to open the Bootcamp application, simply search for it featured in the top right corner.

  If you have already installed Windows and try to start Windows, turn off the computer and then turn it back on by holding the Option key. It should show unity of Bootcamp and the Macintosh HD.

• I want to use the expression editor control in a DLL VC ++ how?

  Hello

  as mentioned I want to use the expression editor control in my DLL written with VSC ++ 2005 MFC. But I came across some problems:

  If I simply add the ExpressionEdit control in the toolbar to my dialog box then the dialog box will appear not during execution. As soon as I remove the control from the dialog box appears.

  In the examples of TS is a called "TCL" (...) Instruments\TestStand national 4.1.1\Examples\Tcl\source\EditSubstep). It is programmed in C++ and uses the expression editor control.

  The original dll works fine, but as soon as I compile the editsubstep with my VS 2005 I get a runtime error (see image).

  What should I do to be able to use this control?

  Does anyone have an example of a job for me?

  Frank has soon

  Hi, I found the solution and now it works fine.

  I just had to enable support for OLE controls in my dll.

  Nevertheless, thanks for your help!

  BOOL CMyDLLApp:: InitInstance()

  {

  CWinApp:: InitInstance();

  AfxEnableControlContainer();  enable support for OLE controls

  Return TRUE;

  }

  Frank has soon