lack of (administrative) print spooler services
I have a MX340 Canon and my printer stopped running. I went into the administrative record found the print spooler, and it wouldn't start - error 1068. Tried to reinstall the printer and the message: processing cannot continue because the print spooler service has been stopped. Restart the computer to start the print spooler service, and then try again. I did and nothing happened. Will not be installed.
I went into the administrative record found the print spooler, and it wouldn't start - error 1068.
What does this sentence?
Please provide the full error message.
Do you now or have you ever had a Lexmark or Dell-badged Lexmark printer installed?
What happened just before the printer who stops working?
And what version of Windows to installed, including service pack?
Tags: Windows
Similar Questions
-
Equium M40X: Cannot print - not done. Print Spooler service does not
My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.
To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?
My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.
Hello
This error occurs because the spooler service has not been started or has stopped working.
It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.http://support.Microsoft.com/kb/314876
As you say that the spooler service must be restarted.
To start the spooler service, follow these steps:
1. click on start and then click Control Panel.
2. double-click Administrative Tools and then click Services.
3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
4. If you want to start the spooler service immediately, click the Start button under the Service status fieldIf you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.
-
Problem printing - "operation not completed; "print spooler service does not.
My laptop has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. Print Spooler service is not running", even though when I look in the Services, it is running. I am running XP Build 2600.xpsp_sp2_gdr.050301 - 1519: Service Pack 2.
Hello
According to the description in this document from the Microsoft Knowledge base:
http://support.Microsoft.com/?kbid=314876Please try this:
1. click on start and then click Control Panel.
2. double-click Administrative Tools and then click Services.
3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
4. If you want to start the spooler service immediately, click the Start button under the Service status field.Maybe it helps you solve this problem.
-
The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.
I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.
System in automatic mode but State of the said service stopped.
I get error 1075: the dependency service does not exist or has been marked for deletion.
Printer worked this AM, but stopped working between two print jobs.
I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.
Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?
Thanks for your help
Robear:
I'll be back of the travel. I'm after the suggestion of CARI. Seems to be the right track.
My print spooler system component is missing from the remote procedure call. If I restore it, I think that the print spooler is reactive. Suggestions of curry hit Start, Program Files, accessories and they type net start spooler. However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.
-
Recharging according to the printing software and get always the same error.
Hello
You must ask in the answers – Windows Forums for your version of Windows.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/WindowsHow to ask a question
http://support.Microsoft.com/kb/555375==================================
Here is a troubleshooting guide for Windows 7 - Vista would be very similar.
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e==================================
Follow these steps in the kind of prerequisites:
Clean the General corruption and repair or replace the damaged/missing files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html------------------------------------------------------
References to Vista also apply to Windows 7.
Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
to install - make a right-click on the pilot - run as administrator.Also check with the manufacturer of your printer and forums support.
--------------------------------------
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administrator
Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
http://wiki.blackviper.com/wiki/Print_SpoolerBlackViper Windows 7 Service - default settings
http://www.blackviper.com/Windows_7/servicecfg.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
and here
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
When I click with the right button on a particular printer and try to view the properties of it, I get the following message:
Printer properties cannot be displayed. The print spooler service is not running
It is, it is run as go to-> Services administrative tools in the Control Panel checks.
One of the 'printers', I installed is "send to OneNote 2007". I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?
Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear. So the fact that I'm still see them first place suggests to me that the printer spooler is running.
I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site . Problem is C:\WINDOWS\system32\spool\PRINTERS is empty. It is empty when the print spooler is running and it is empty when it is not.
Also, I was unable to install KB896423 since I am running SP3. Try to install he did the following:
Setup has detected that the version of Service Pack for this system is newer than the update you are applying.
There is no need to install this update.
The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port". Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".
Hello terrafrost,.
Thank you for visiting the Microsoft answers community.
What is the model number of the printer that you are using?
Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.
I would try to uninstall your printer and reinstall your printer.
Hope this helps Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot print, says that my printer spooler service is not connected
I can't use my printer. I get a message that my printer spooler service is not connected... Could not find subject right in the Help menu. How should I proceed? My operating system is Windows XP Home (sp3) and my printer is a Laser of HP 1020 printer.
Hello
1. when exactly you get this error message?
2. don't you make changes to the computer until the problem occurred?
I suggest to try the steps mentioned below and check if it helps to solve the problem.
Method 1:
See the link below and run them the fixit tool available, check if it helps.
Problems printing and printing errors:
http://support.Microsoft.com/mats/printing_problems/
Method 2:
To change or restart the print spooler service:
You must be logged on as administrator to perform these steps.
a. Click Start > run.
b. type services.msc and press to enter. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right-click on the print spooler service and then click Properties.
d. under the tab general , next to Startup type, make sure that Automatic is selected.
e. If the service is not already running, under Service status, click Startand then click OK.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
More information: Printer in Windows problems. http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Hope this information is useful.
-
Printer error print spooler service does not? Why not
I have a problem with my printer . I went to use this boy was that cannot use a misstake... go Control Panel /printer .and see I have no printer and you can't print at all. I tried to instwith a CDerror the Print Spooler service does not... I need help big time what should I do?
HELP Florida Irving
Hello
Try the steps below and check if they help to resolve the issue.
Method 1:
Check the link below and try the troubleshooting steps provided to solve the problems with the printer in Windows.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2:
If the steps in the link above do not help, try to manually restart the Printer Spooler service.
You must be logged on as administrator to perform these steps.
(a) open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
(b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) right click on the print spooler service, and then click Properties.
(d) on the general tab, next to startup type, make sure that automatic is selected.
(e) if the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation
-
Not in the print spooler service
Trying to install wireless printer, but cannot load disk from HP software because "Spooler not to the print service. Had problems of virus recently and suspect damaged printer driver. Where am I going to restore the print spooler service?
Click on the Start button and select Control Panel, administrative tools, Services. Locate the print spooler service in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. After the change is made click apply and then click OK. Restart the computer and verify if it has started. Hope this helps, Gerry Cornell
-
local print spooler service error 0x000006ba is not running windows 7
All of a sudden I cannot print anything and I get this error message. Using Windows 7 Home premium 64-bit. Have you tried restarting the spooler, but he continues to go again. Had really hoped that this bug should be gone after the transition from vista to 7, but I do not.
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e------------------------------------------------------------------------------------
References to Vista also apply to Windows 7.
Go to the one who made the printer and get the latest drivers - download - REGISTER - install yet. When
ready to install - make a right-click on the pilot - run as administrator.Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administrator
Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
http://wiki.blackviper.com/wiki/Print_SpoolerBlackViper Windows 7 Service - default settings
http://www.blackviper.com/Windows_7/servicecfg.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
and here
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Print Spooler service stops still.
I am facing a very grim situation, because of the Vista PCs always Printer Spooler service stops. After stopping these services all usury priters hidden and I can't add a printer. Aftet I I restart manually from the services but a few seconds it stops. I got this page from Vista PC. Can anynoe help me to overcome this problem?
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
-
I need help restart my print spool service!
I'm trying to reinstall my brother mfc-885cw on my home network. Adell deminsion 3000 and a dell inspiron1720 is also on the network. the dell deminsion is able to print to the printer wireless. I had some problems with my laptop so I have reenstalled windows vistahome premium return on mylaptop. But when trying to re - install the software, I get an error message saying (eorror # 0 x 80040707 discription: call junction DLL crashed: BRADDPRT.) CHECK THE LOCAL PORT). WHENEVER I TRY to INSTALL a printer on my inspiron I get an error message (Windows can't open add printer.) The local print spooler service is not running. Please restart the spooler or restart the machine) anywhere, I try to re - install a printer I have error message (windows cannot start service on local computer error 1297 thePrint spooler)
Hi, James.
Press the Windows Logo + R
Type Services.msc
Press Ok
Press on continue in the UAC window
Open the Services window
Scroll down to print spooler
Double-click it to open it
Starting, check that automatic appears
Under Service status, you can press Start
Close the windows
To install, do a right-click on the file and select run as administrator
http://social.technet.Microsoft.com/forums/en/mscomops/thread/4110a4a8-4E0A-46A1-A07F-71101010b6ef
-
help on the Printer Spooler service?
well, I can't get my printer to work spooler, and the fix for microsoft can't help either, any help?
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
I have XPS from Dell with Windows Vista Home premium 32-bit. I'm trying to connect the office jet J4680 HP wireless printer. The printer was working with this PC, but for the last 2 weeks, something has changed and I can't reconnect to the printer. I get the error Printer Spooler service is not running. After I have start the spooler service and try to add a printer, I get an error 0x000006be code
Hello
The main problem is caused by corrupted printer drivers, you will need to check with your printer manufacturer for
Download the latest drivers (just re - install the old ones will probably lead to this error). Make sure that you
Download for your version of Windows and 32 bit or 65.Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»
http://support.Microsoft.com/kb/946394==========================================
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest version of the driver).Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx
------------------------------------------------------Logon as administrator
Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
------------------------------------------------------------Check this thread - stop and disable the spooler
------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlIf no joy:
Try the Startup Repair tool-
This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlTry runnng Chkdsk of Recovery Options
(it of a more efficient way to manage to restart the computer and might work)I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows must now restart because the print spooler service terminated unexpectedly
I have a PC running on Windows Vista professional that I had for about a year with two printers that have also been all this time, a HP LaserJet 1000 and an Epson SX105.
This morning, amid a series of PDFs (separate files) printing on LaserJet printers, I suddenly had the following pop-up message:
"Spooler SubSystem App stopped working and was closed".
On the Control Panel, I found that my two printers have apparently disappeared. My first reaction was just close and restart the computer, often kind of seeds.
To restart, I tried to print again, but I was told that I had to install a printer. Trying to install a printer, I learned that I could not because of a problem with the spooler. I looked online to find a solution and one that suits (without touching the registry) seemed to be to check the operation of via Control Panel's print spooler, and then restart. Oh dear. What a mistake! I did this and found that the printers have reappeared, but then about 30 seconds later, I got the following pop-up message:
"Windows must now restart because the print spooler service terminated unexpectedly.
Each time it restarts the message comes back after less than a minute and restarts on another 30 seconds later, so I have a chance to try a system restore (I installed the last service pack Vista a couple of days), or something else... it's just in a loop of perpetual reboot, I can't stop restarting Windows.
How the hell do I? (I send this message using my Vista laptop and pray the same problem occur here, too, so I don't have to print anything).
Hello
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check the Mr Fixit here and if you use the other methods go back and try again later.
Problems printing and printing errors
http://support.Microsoft.com/GP/printing_problems------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
------------------------------------------------------------Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and replace all the lost files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
MS Home and Student on Satellite P300 - 1-9
Hi all Just bought a Toshiba Satellite P300 - 1 9 and it has Microsoft Works installed. When you open one of the programs works Office home and Student 2007, which is not normally included in Works. There is nothing to say or indicate that it is a tr
-
What is a very good pc image cleaner online free
I need a free on line P C cleaner which will scan my computer at home a pure TI also which will set my P C errors image
-
Voice is not audible when played on media player
original title - Re Media Player CD play a lot! When I try to watch a DVD, the music is great, but the voices are inaudible. To read lips to watch the movie. Help, please!
-
How can I get my email MSN return to the MSN Arabia English
My e-mail page is not in English. Writing is in Arabia and that English, there goes right to left instead of from left to right, it should be in MSN in Canada.
-
Just hooked up my new fuse. Rhap recognizes it, but when I right click on it in Rhap, I don't have the option to authorize. I have records left in Rhap. I'm in MTP mode and media player 10. Thank you!