Similar Questions

• Windows ME error after installing an Ethernet network card: "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE ".

  I installed 32-bit network card Ethernet 10/100mbps in a tower of E which has Windows Millennium Edition.  When I tried to run the C/D that came with it I got the message, "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE' in the network configuration panel it lists the network adapter as a TCP/IP Protocol, but could not get on the internet. In the past, the only way this computer connected to the internet was through a dial-up access. Any help would be greatly appreciated.

  original title: problem of setting up a network of maps by ME

  Hello

  Windows ME (Windows Millennium Edition) is a Microsoft product.

  There is more support available for Windows Millennium Edition.

  
  Reference: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

• Schema import failed: IMP-00008: not recognized training in the export file:

  Hello
  
  I was running an import of a DPM database file database schema.
  
  I met the following error in the generated log file to get:
  
  IMP-00008: unrecognized statement in the export file:
  
  All tables copied except one. Now what I thought must import only one table again after the export of the production schema.
  
  But what functions, triggers, procedures? How I put them all in the schema?
  If reimport the schema still the only option?
  
  
  Thank you
  KK

  have you tried with a new such export suggested before?
  Also, check if the export file has been damaged or truncated due to lack of space in the pipe of destination?

  Published by: orawiss on May 5, 2011 13:17

• Where are my sent exported files?

  Usually I export simply pressing "share" then "master file" that I can select the destination disk.  iDVD has had problems with my exported files, so I decided to try the option that says '1080 p Apple devices'.

  After its exports I get the window "Successful Action" but have no idea where it put this file.  Do a search for "Apple devices, 1080" comes empty.

  Does anyone know where these files go?

  The default value is sent to iTunes for syncing. You can probably find it there. In the future in settings, where it says add to playlist, change the popup not do. This will give you the option of assigning a destination.

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

  Hi sonalnj,

  I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

  According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

  iPhone 6 s Tech Specs
  http://www.Apple.com/iPhone-6s/specs/

  Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

  OS X Lion mountain
  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Nice day!

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)?  Fact is need to update itunes? Also you can sync ipod touch?

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. How to synchronize or import/export files(images/music)?  Fact is need to update itunes? Also you can sync ipod touch?

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• iPhoto - JPEG with Lightroom export files

  Dear community,

  I take my Photos in RAW format and use Adobe Lightroom for workflow management and the work of any photo. As a result, I create two sets of JPEG files: the full-size images are stored on my file server, while the reduced size JPEGs (approx. 1200 x 1600) I keep on my MacBook Pro. Date & time of the images exported JPEG is different to the actual hours when they were taken, I get a problem during their import in iPhoto because iPhoto 'think' that have all been taken recently. This creates a huge mess in iPhoto. I'm talking about 17,000 photos taken between 1999-2015. Given that I exported the entire stack at the same time, iPhoto shows them as taken today after importation. Photos are all stored in an appropriate folder structure (event/year).

  Now my question: How can I teach iPhoto to use the structure of folders to sort the photos in the right way? As I have said, without the pictures in chronological order, they are useless. And so is iPhoto. Why do they want to do? Simple answer, I would like to share my photos on my Apple devices and for this, iPhoto would be just perfect.

  Can someone help me with this or is that someone has a better idea for the RAW-> Lightroom-> export-> stream Jpeg iPhoto work?

  Thank you very much!

  Hans

  Date & time of the images exported JPEG is different to the actual hours when they were taken, I get a problem during their import in iPhoto because iPhoto 'think' that have all been taken recently

  It's down to how you export from Lightroom. iPhoto Gets the date and time of the photo Exif metadata and uses only the data of the file if it is missing. Check your LR export procedures to write Exif data in the exported files.

  So, this is the solution to your problem.

• Change to error in the export file in the order of the elements in the array of construction

  Hello world

  Some time ago I wrote a vi file that performs the following operations:

  As a first step, it initializes a camera and chooses a region of interest (ROI). Data on the return on investment will be eliminated.

  Then he raster scan engine stage in x and y axis, in bidirectional mode (meaning that x alternating between sweeping left to right and from right to left as is inreased).

  For each point of the analysis, the spectrum is collected, which is then integrated into lambda to give an idea of the total intensity.

  Then the intensity is plotted, as well as the spectrum at each point.

  The final results are exported to a text file.

  The problem:

  If I reverse the order of the son in the 'build' table prior to exporting the file, place the Total Count (intensity) wire instead of thread of the spectrum, the export file fails. By "fails", I mean it's the .txt file contains characters that resemble Chinese!

  Why is this?

  I enclose my .vi, as well as two screenshots that show the problem.

  Hooovahh wrote:

  Such a small change, should not have such a strange result.  I advise to use some debugging tools like highlight the enforcement tools, probe and breakpoint to see what data is when it runs.

  http://www.NI.com/gettingstarted/labviewbasics/debug.htm

  The Source is in 2011.  I see an opportunity and a potential work around certain things to try.

  1. take the following steps
  
  
  • Select each stacked sequence right click and "convert flat sequence.
  
  
  • Select each flat sequence and delete the sequence

  It could simply fix it by itself you want to turn auto-growth on surrounding structures

  2 allows to observe the data in the table build

  • For all wires that are sgl heading construction table insert a dbl and a copy of Allways

  What I suspect LabVIEW is incorrectly re-use of buffers for the inhabitants of sequence

• 'Lack of installation files' then install LabVIEW 2014 (Win7-64 on a VMWare system)

  Hello

  I try to install LabVIEW 2014 on a VMWare Windows 7 - 64-bit environment, with no luck.

  3-DVD installation media has been downloaded from NI.com, the release of August 2014 of the Site license academic (ASL), which my company is a regular subscriber, a very long time.

  (Interestingly enough, this same virtual system has fonctionnee LV 2012 without any problem whatsoever)

  Here are the steps I followed:

  -unzip the 3 iso files on separate directories on drive virtual, principal of this system;

  -Run setup.exe on the first directory (IE one that contains 1 DVD files)

  -Enter the serial number of the FSA

  -l' Installer leaves just selected default English 2014 LabVIEW and the Manager of Package of VI, so I expand the ASL Core Software to add NIDAQmx 2014, and I also selects the device drivers OR - August 2014

  -J' I accept different license agreements

  -I select "I am not the end user" to postpone activation

  Setup continues but almost immediately alerts telling me that it was impossible to install "NI Customer Experience Improvement Program", Yes , I want to keep and then I see a system dialog box display of files/paths that do not actually exist on the directory DVD 1, hence the obvious error 'lack the installation files"message. If I ignore this message, several other similar dialog boxes appear.

  Either by the way, I've done various research, but, right now, apparently not a popular question at all.

  Any advice?

  Problem solved.

  For some weird reason, WinRAR do NOT extract some files from the first archive .iso (but more importantly, she also didn't show absolutely no error message, leading me to believe everything was fine).

  When any further inspection, I found about it and made extraction .iso process everything again and this time to the installation program completed without fault.

• cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files

  cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files

  Hi kenau78,

  a. this problem during installation?

  b. you install an iTunes 32-bit version or 64-bit?

  c. What is the CPU architecture, 32-bit or 64-bit?

  I suggest you to contact the Apple support also, because the problem is with iTunes, from the link given below.

  http://www.Apple.com/support/

  You can also ask your question in the discussion forums Apple from the link below.

  http://discussions.Apple.com

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Export file DDL in SQL Developer Data Modeler

  I export my last project of relational model of the DDL weeks in hopes of getting a quick and precise way to create my 17 tables. In the relational model, Cust_ID is the PK yet there is nothing indicating it in the script that is created from the export file DDL.  That's what he created.  Now, when I right click on the customer table in the view of the relational model and then choose Preview DDL, it adds the line of alter table. But when I do this for most of the opther whose phones table tables in the image below, it's just the fields, no PK or PK info. How can I get the PK and FK stand? Thank you, Peter

  CREATE THE customer TABLE

  (

  Cust_id INTEGER NOT NULL,

  Name VARCHAR2 (128).

  Address VARCHAR2 (128 CHAR)

  ) ;

  ALTER TABLE customer ADD CONSTRAINT Customer_PK PRIMARY KEY (Cust_ID);     <-this is displayed in the preview of the DOF, not export file DDL. The telephone table does not show the constraints or keys in each view. Even with almost all tables.

  That's what I have for phones

  CREATE TABLE phones

  (

  Phone_ID INTEGER NOT NULL,

  Phone_Type NVARCHAR2 (10),

  Phone_Number TANK (14),

  Customer_Cust_ID INTEGER NOT NULL

  ) ;

  

  Hi Peter,.

  A couple of points to check for definitions of key primary and missing foreign key:

  1. the relational model for the primary keys and foreign keys dialogs have both checkboxes 'Generate in DDL', which are normally set.  Make sure they are always defined.

  2. When you make a DDL generation, on the generation of DDL Options screen, select the PK tabs and UK and foreign key constraints and check the boxes 'Selected' for relevant pharmacokinetics and the FKs are defined.  (These settings are remembered from one generation of DDL to the other, and an overview of the DDL will normally use the same parameters as the most recent generation of DDL).

  What Data Modeler version do you use?

  David

• Export files for use in Adobe Muse OAM

  I'm a 3D Designer and you want to make an OAM-file so I can put it in Adobe Muse.

  I try to import all the 500 png in Adobe animate CC and save it as a file OAM, but quality is still poor.

  How can I set up publication for OAM that the quality is good.

  Thank you.

  

  Export files of CC OAM animate to Dreamweaver and Adobe Muse | Adobe Dreamweaver CC tutorials

  [moved to Adobe Creative cloud to Adobe animate CC - general]

• Issue by importing an export file application

  Hello

  Oracle APEX Version: Application Express 4.1.1.00.23

  Database: Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  Well, it worked nice and good, and all of a sudden it started working weird when I tried to install an export of the application.

  When you try to import the export file, it just runs and runs forever and can be found in the error message

  The website cannot display the page

  How wrong what?

  Thank you
  Sam

  That is why its always best to write a minimal code such as procedures and back-end functions and calling in reports

  so it will take less time when rendering page also told by my mentors

• outline of export to xml_file... of EAS-&gt; editor MaxL, where is the export file

  Hello

  version 11.1.2.3.x

  EAS is called from IE via the valid url and opens without error.

  When I run an EAS (MaxL editor) extracted xml schema there are errors.

  for example, as shown in the documentary

  https://docs.Oracle.com/CD/E17236_01/EPM.1112/esb_tech_ref/frameset.htm?maxl_expotl.html

  -> export contour sample.basic all dimensions to xml_file 'c:/temp/basic.xml ';

  The error says cannot create objekt. However, the given path c:/temp is on my customer box.

  When I run the same shell maxl, it works like a charm... the otl-xml-export file is created on my machine in the given directory.

  Only when I run the command in the EAS WITHOUT any path as "basic.xml", it works without any error, however I can't find the file on my box. Where would it be? Why the error when valid a path is given?

  I have no idea.

  Can someone explain the weather I do something wrong, or is there a person who faced the same problem?

  Thanks in advance!

  André

  Hi John,.

  First: thank you for your quick response!

  Indeed, it is created on the application server.

  It's terrible! I have even written in c:/Windows /.

  I've never tried this before. And what I see makes my very concerned on this issue.

  Anyone who can run a such export can write anywhere on the application server.

  Give me a few minutes to realize what this means about security issues.

  Oracle! Please explain what you have to say.

  Best regards!

  André

• restore sequence from an export file

  
  I have an export of 3 patterns, which was done a few months back. I want to only restore sequences is there some way I can pull the DLL in the export file so I can delete and re-create or IMPDP allows to create sequences

  With impdp, you can use the INCLUDE options you define only want to get the sequences and the SQLFILE option to generate the ddl and not download them from the database, from there you can use/edit the sql file, for example: include = SEQUENCE sqlfile = seq_output.sql

  Hope that helps,

  Daniel