Lack of external input clocked with USB 6008

Similar Questions

• Get incremental counter/sound to work along side with action with usb-6008 with labview tia sal22

  Get incremental counter/sound to work along the coast with usb-6008 with labview tia sal22

  Hi all

  I can get this vi to work if they are distinct from the vi but I can't join them together

  Example of my error:

  If buffers are set to 0 the freq counter increment works, but no sound
  If the buffers are set to 1 the audio works fine but is not increment the Freq counter
  If the buffers are attached to more 1 clicks and pops are coming

  That's what I'm doing:
  (1) have the frequency of increment of my internal sound card to a certain level as .01hz a second until he gets to 20 000 hz

  (2) use my device usb-6008 daq, which is connected to the same machine to measure the voltage at the same time. (I am in a position very low voltages between 1-5volts)

  (3) output to a worksheet text file which will show you:

  time in seconds, frequency, voltage
  0,400.01,2

  1,400.02,2.5

  2,400.03,1

  I'm a bit confused about how connect the increment and the audio during the measurements with the usb-6008 housing on the same machine
  at the same time and in the same VI.

  Anyone have any ideas?  I'm using labview 8.5
  TIA sal22

  Ha ha you have been deceived by a dynamic thread. Insert a convert from Dynamic Data Express VI (Palette to own: Signal handling screw Express) between the daq read and build the array function. Then it won't work. Now the value in the dynamic data is only converted to a numeric value

• I want to back up files and programs to an external 500 GB external hard drive with USB 2.0 connection. How can I do this?

  original title: Windows XP USB 2.0 HD backup

  I have a Dell Dimension 8100 2002 with 80 GB C and 200 GB drive F drive.  I want to back up files and programs to an external 500 GB external hard drive with USB 2.0 connection.  How can I do this?  Do I need special software to do this?  I have Windows XP Home Edition.  If I need additional software, what software recommend you?  Now I have My Documents, my pictures, etc. on F: and programs on C: any help and suggestions would be appreciated.

  Thank you, Bob Morrow

  You have a few choices.  You can buy a 3rd party program to backup such as Acronis True Image or Norton Ghostor you can install the program NTBackup comes with XP Home, but is not installed by default:

  'How to install backup from the CD-ROM in Windows XP Home Edition'
    <>http://support.Microsoft.com/kb/302894 >

  HTH,
  JW

• Pulse counting with USB 6008

  Hello world!

  I have a project with USB 6008. I want to count impulses (for special features: count the pulses of the encoder) use USB 6008. I wirite with DAQmx to test a simple. But it do ' t run. Please see and help me to do this exercise. I just borrowed 6008 USB so I don't have any experience with USB 6008. Thank you! It's funny.

  Looking at the PFI0 manual (pin 29) is correct and I don't see anything wrong with the code and example should work. I have a M-series card, not a 6008 and it works for me. This error code is meaningless if. Are you sure it's the number?

• Want a ramp of output voltage over time and measure input 2 analog USB-6008

  Hello

  I want to produce an analog voltage output signal that increases over time with a certain slope, which I'll send in a potentiostat and at the same time I want to read voltage and current (both are represented by a voltage signal) that I want to open a session and ultimately draw from each other. To do this, I have a DAQ USB-6008 system at my disposal.

  Creation of the analogue output with a linear ramp signal I was possible using a while loop and a delay time (see attachment). Important here is that I can put the slope of the linear ramp (for example, 10mV/s) and size level to make a smooth inclement. However when I want to measure an analog input signal he's going poorly.

  To reduce noise from the influences I want for example to measure 10 values for example within 0.1 second and he averaged (this gives reading should be equal or faster then the wrong caused by the slope and the linear ramp step size.) Example: a slope of 10 mV/s is set with a 10 step size. Each 0.1 s analog output signal amounts to 1 mV. Then I want to read the analog input in this 0.1 s 10 values)

  Because I use a timer to create the linear ramp and the analog input is in the same loop, the delay time also affects the analog input and I get an error every time. Separately, in different VI-programs (analog input and output) they work fine but not combined. I searched this forum to find a way to create the ramp in a different way, but because I'm not an experienced labview user I can't find another way.

  To book it now a bit more complicated I said I want to measure 2 input analog (one for the voltage of the potentiostat) signals and one for the current (also represented by a voltage signal) and they should be measured more quickly then the bad of the analog signal. I have not yet started with because I couldn't read on channel work.

  I hope someone can help me with this problem

  An array of index. You want to index the columns for a single channel.

• Data acquisition with USB-6008 using C++

  Hello

  I am trying to use USB-6008 to collect analog data without using Labview, since I can't afford the lincence. I searched in the C++ provided with product samples and found "Simple example of analog input.

  The compiler I use is codeblocks instead of visual studio (once again for monetary reasons). The code seems to works since when I run it with the USB-6008 box connected, he wrote "gains 1000 points.

  I have 3 questions relating to the use of this code:

  1. where are stored the 1000 points?

  2. How can I modify the code to specify the time acquisition and the frequency of acquisition?

  3. How can I change this code sample points simultenously with 8 analog inputs?

  Thank you for your help,

  I'll try to add any clarification if necessary.

  Albany

  Your questions are answered in help for c programmers.

  1000 points are in the variable array of points called 'data '.

  The sampling frequency is set to sync.

  The number of points read is defined with the function of reading.

  Read channels are defined with the function channel set. To read multiple channels, use syntax such as Dev 1 / ai0:3 for the first 4 channels.

• Frequency of maximum output with USB-6008

  I have a digital circuit containing 3 exits, 3 inputs digital and analog 1 entry in labview with my USB-6008. When I connect to the entrance (via the DAQ assistant) analog, the output frequency is reduced to a maximum of 27 Hz, but I need 50 Hz. is possible to do?

  Ah.  You'll need a DAQ better than the 6008, to do.

  There is no train generation feature buffering or the pulse on the 6008.  The outputs are all timed by the software, you cannot build a table and tell the 6008 in the output array.  Out of the 6211 must be able to produce this signal.  Series X-series Renault will do what it takes; the USB-6341 is probably your best option.

• Reformat using an external CD-ROM with usb connection

  Try to reformat my old laptop but my cd rom is broken when I try to do with an external cd drive via usb, the computer does not see the external cd drive

  Hi eeeLW,

  ·         Other not detected USB devices?

  Check if the drive is detected in Windows Explorer. To check if the drive is recognized by Windows, you will need to click Start, click my computer. Check if you can see the drive.

  Method 1: Make sure that the drive is detected in the BIOS (basic system Input\Output). Refer to the manual or visit the support Web site to do this. Connect the drive to a different USB port and check if it helps.

  Method 2: Run this utility of automated troubleshooting and see if it makes a difference.

• Loss of communications with USB-6008

  I have a USB-6008 be used to control a couple of valves with its digital output channels. The digital output channels are a relay that energizes the solenoid valves (valves are 115VAC) switching. The USB device is connected to a USB port on laptop.

  The software/hardware was working fine, then some time while it was connected there was a power surge. There was a 2 a fuse on the 115 VAC line that blew.

  After this communication surge was no longer able to be implemented with the box USB-6008. Is it possible for a power surge affecting the USB device, even if his power comes from the power supply of 5V USB?

  Things I checked so far.

  Restart the computer with the USB unplugged and start back up - no connection

  Check the Device Manager for the USB device to be present - not visible in the Device Manager

  Check MAX for device - does not present as gift

  Check the wiring to the son of course drop - no defeated cables

  try on different laptops - connection

  Connect other USB devices to the laptop USB - another fine feature of devices USB slot

  Check the + 5V channel on the USB device and do not read a voltage

  Any indication seems to be that, somehow, the USB device has been damaged during this surge? Is there some kind of diagnosis offline, I do without seeing the unit online?

  Hello the plough,

  It looks like the surge caused a sort of feedback of the valve of your USB device. This USB device is not designed for industrial applications and can easily be damaged in the situation you described. For a USB device with a greater ability to withstand this type of power surge, you should watch the box USB-6525. A better solution would be a CompactDAQ or CompactRIO system with a NI 9401, which is designed to withstand 1 000 V_rms, verified by a 5 s dielectric withstand test.

• Amplification of Type K Thermocouple for playback with USB 6008 at high temperature

  I'm looking to amplify a K type thermocouple, so that the signal can be read with a bit of precision by a USB-6008. I watched the AD595 chip, but it indicates a maximum useful temperature of 100 ° C and I'll need to read up to 700 C.

  Is there another amplifier chip that would work up to this temperature, or should I resign me to use the unamplified signal and get a very inaccurate (~ 30/division) the temperature reading?

  The AD595 has a range of-200 C to 1250 C, here is the data sheet:

  http://www.MNE.PSU.edu/Sommer/me445/AD595.PDF

  -AK2DM

• Measures of true bipolar voltage with USB 6008/6009

  The 6008 or 6009 to make true bipolar (positive and negative voltages referenced to GND) measurements?  If not, what is the solution to purchase cheaper data this feature?

  Thank you.

  The question of unipolar vs bipolar vs bipolar Pseudo-aleatoire also was mentioned in this thread.  The 6008 6009 use bipolar-only mode and load the setting differential input or CSR.  Please note that {unipolar / bipolar / Pseudo-bipolaire} is independent of {differential / CSR / Pseudo-differentiel}.

  The 6008/6009 don't use 'Pseudo-bipolaire', which means that each differential input should be positive with respect to the ground.

  Best regards

• Best external hard drives with usb and 2 crush

  I plan to buy an iMac 27 "and looking external hard drives usb and lightning which can be chained. The cie has some on apple's site, but do not have good reviews. Technology g g download reviews good enough readers. All of the suggestions.

  Have you looked at OWC? I have several of their readers, but mine are not Thunderbolt - they are either FW or USB3 or both.

  http://eShop.MacSales.com/shop/external-storage?_ga=1.37930981.756347728.1456539 978

• How can I get digital signals (interface UART) with a microcontroller with NI USB-6008?

  I have acauired a few analog signals by A/D (3 channels). I put each scanned data on 3 digital output with a microcontroller. I want to see if it is possible to import these digital outputs 3 to a PC via a USB-6008? It's like the connection of the output to the digital input of the USB-6008 and import the 3 channels simultaneously to LabView? Do I need to use some other hardware like USB-8451 and connect the clock of the MCU to USB-8451?

  Saraydin,

  The digital I/o on the USB-6008 is a software program only, so unless your signals are rather slow, it probably will not work for you.  In general, the procedure would be to connect each signal to one of the digital lines on the map and then set up a digital entry into LabVIEW task to read the three channels.  If you use a device that has clocked by the digital i/o hardware, you then your input clock signal and use it as the sample for the task clock.  Here is a list of USB devices supporting DIO clocked by the hardware.  Also, there is an example that comes with LabVIEW, which shows how to do this.  You can get to it in LabVIEW by going to help > find examples.  When the example Finder window opens, navigate to hardware input and output > DAQmx > digital measures > Cont read dig Chan-Ext Clk.vi.

  The 8451 is specifically for I2C and SPI, and would be great if you try to make one of these protocols, but otherwise I would recommend the devices in the list I linked above.

  -Christina

• USB 6008 weird analog voltage reading

  Hello

  I use the USB-6008 to measure a voltage of a Lithium battery, 3.66V.

  the battery come with a blocking diode (in series with the battery) of 1N5820, who have a fall of voltage drop of 0, 1V.

  battery with diodes in series (this is the way in which the battery is shipped with)

  -measure with DDM yield 3.66V without you connect to usb6008

  -measure with DDM yield connected to usb6008 (putting OUT VOLTAGE USB6008) 3.59V

  -able with USB-6008 performance 3.59V connected to usb6008

  battery with diode removed

  -measure with DDM yield 3.66V without you connect to usb6008

  -measure with DDM yield connected to usb6008 (putting OUT VOLTAGE USB6008) 3.66V

  -able with USB-6008 performance 3.66V connected to usb6008

  Thus, it seems that the problem is in the led in the series.  This is why the battery voltage has fallen to 0.07V? the series diode will hurt the USB-6008?

  Maybe people who know the circuits inside the USB-6008 can give me an answer.

  Thanks in advance.

  Hi learnerd,.

  The fall that you see is falling forward in the diode.  As an entry class device, the USB-6008 case has a relatively low input impedance (144kOhm) and thus draws a little current of the device.  Looking at the datasheet of the 1N5820 (http://www.onsemi.com/pub_link/Collateral/1N5820-D.PDF), Figure 7 shows that at 25 ° C, a draw of 50mA will cause a fall front of 200mV.  While the figure does not extend the curve below 50mA, extrapolating the given curve would indicate that a drop of 70mV would cause only a few current microamperes.

  A DMM will have a much greater input impedance (GOhms instead of kohm) and won't draw enough current to influence the measure, that's why you wouldn't see the decline with only the DMM.

  The diode will not harm the USB-6008 somehow.

  Good luck with your application,

  The f

• USB 6008 angle measurement?

  Hello friends

  I need to measure the angle of rotation of the shaft with a precision of 1 degree... is there any simple device can I connect with usb 6008 custom angle...

  Thank you

  180 degrees is very different from continuous rotation. Just wire a potentiometer to one of the analog inputs and try to calibrate it.

  You don't need the LM317.  It will not help you with what you have described so far.

  Lynn