Lack of scrolling views content

I am facing a problem that I have not met yet in a year of editing with DPS.

Two of our scrolling views do not appear in our magazine.  Instead, the little blue box with a question mark (as when an image does not load on a Web page in Safari) is visible to the half of the view to scroll, which suggests that the image resource to be used by the device is not able to be loaded.

Unknown yet, the problem is only on one of my three devices in the House.  But so far, two of our customers have reported the same problem.

All three devices running the same developer version of our application, but with the different iOS version.  Points of view scroll work on iOS 5.0 and 4.3.2 but don't work on 4.2.1.  I "m the problematic device to iOS update 5 and have reached out to my customers to see if devices that they know the issues on running 4.2 or lower.

Has anyone else seen anything like this?

Thanks Bob!  We are looking for anything that could be causing things to slide up.  Oddly enough, remove all the videos of this stack had no impact whatsoever

At the 11th hour, Friday, I found the cause for iOS 4.2.x.  My editor (and some of my readers) had not upgraded, and the oldest operating system caused the content to disappear.

Upgrade to iOS 5 solved a problem for all the world it has reported so far.

Tags: Digital Publishing Suite

Similar Questions

  • How to trigger an action when scrolling of content

    I downloaded a couple of different question of the dps magazine and I found something interesting that I want to reproduce.

    When you're scrolling of content in an article, at some point it trigger an action such as change the background image?

    I'm guessing that this was done Indesign outside, perhaps with the edge? I would be grateful if someone could give me a guide on it.

    It's almost certainly an HTML article or a web overlay. We have no with InDesign DPS tools to raise substantive changes the scroll.

    Neil

  • Integrate the Web viewer content into your web page

    Integrate the Web viewer content in your web page for Creative Cloud Student and Teacher Edition? Is this possible?

    http://www.Adobe.com/devnet/digitalpublishingsuite/articles/embedded-Web-Viewer.html

    No, you need a company DPS or Professional Edition for this.

  • Viewer content on the issue of the iPad

    Anyone else see something like that, I have a folio has shared with me. I open the viewer content on the iPad (which is updated and rebooted). I sign in and then try to download the shared folio. It generates an error and then I signed out and all of the common folios disappear from the content viewer (because they are always in the cloud). I can't find a way around it - so I connect the iPad to my machine and preview folios shared by InDesign.

    This resembles the v25 double connection bug. In some situations, you need to sign both times see your folios.

  • Is anyway to say the size of the file viewer content v25?

    Is anyway to say the size of the file viewer content v25?

    In the library, click the gear menu and choose Delete questions. The size of each downloaded folio folio is displayed.

  • PDF of pinch and zoom does'nt work correctly in the viewer content v25

    Hello world

    I wonder if anyone has experienced the same problem when view PDF-folios in the new v25 Viewer update: when I do the typical pinch & zoom gesture on my PDF-folio-case nothing happens. I type the first page so it will zoom in and THEN I can pinch and zoom in as usual.

    I tried with folios build for v25 as well regarding v24: as long as I open them in the viewer content v25 this "bug" will appear. I have never experienced such a problem in v24 content viewer: all my PDF folios could get pinched and zoomed immediately without typing on it first.

    So, it is already a known bug? And if so, Adobe is working on that, yet?

    Thanks for any answer!

    It is a question, and he reported to the team to fix in our next release.

    Neil

  • scroll the content before the header below it and not on top

    Hello

    At my header and footer any place in this content on the homepage rode underneath

    woke up today and the content on the home page is scrolling on the header

    any thoughts on how to address them to the home page and other pages scroll in my head of sticky which is pinned at the top? \

    Thank you

    Hello

    Please try the following steps to resolve this problem.

    • A - master page open in Design view.
    • Open the layers panel and create a new layer and name as "navigation" to ensure that it at the top of the list.

    • Select the navigation elements as shown in the screenshot below.

    • Once selected, right-click on it and select "move layer".
    • Then select the top layer of most "navigation".
    • This will bring the items selected in the top of the stacking order and will solve these two issues.

    Kind regards

    Vivek

  • Can not scroll the content of my Page

    Hi guys, I'm working on a new site and having problems with my pages do not scroll down (to be able to view all content on the page), seen online - it stops at a certain point and goes no further.    I use Dreamweaver CC (and a Web site template, I got somewhere).   I searched some forums for a fix and tried to change some positions of 'fixed' css 'parent', but nothing helped.   My test page is here to http://www.baseballhypnosis.com/running/test.phphttp://www.baseballhyposis.com/running/test.php of ideas or suggestions would be greatly appreciated!   Thank you, Craig T

    OK, this isn't what I thought initially. The problem is line438 of custom.css as in

    #decorative2 {position: fixed; top: 0; left: 0; right: 0; z-index: 1032}

    Not sure, but try to remove the whole line and see what happens.

    Also take a look at the correction of these errors [Valid] Markup Validation of http://www.baseballhypnosis.com/running/test.php - W3C Markup Validator

  • viewer content scrollbar

    When spotted a folio of dps in adobe content viewer (both on my devices and the desktop), does anyone know how to disable the 'scrollbar very' slim that appears on the right side of my single page folio? Even with smart scrolling turned off, and on a single page article, there is still a small black gutter which straddles my design and is particularly annoying when I'm working with borders etc any help would be appreciated

    You can't, it's still there in the Adobe Content Viewer. I'll see if we can change that to "only when scrolling" in our next release.

    Neil

  • Cannot play/view content properly on a particular Web site

    I use the website: member.russianaccelerator.com to learn Russian.
    I can play a video, but cannot pause. Audio files give the error: "failed to listen to video because the file is corrupt."
    I think these are flash videos of base but not 100% sure.
    If I try Google Chrome, I can view all content correctly (videos play/pause properly, audio works fine).

    It would be easier to just use Chrome, but I think perhaps to draw attention to this could help improve Firefox somehow.
    I appreciate everyone who has provided aid and support to the community in the past and the present.
    If someone feels up to the challenge, please help me solve this problem. Thank you

    Start Firefox in Safe Mode {web link}
    While you are in safe mode;

    Type of topic: preferences #advanced< enter > in the address bar.

    Under Advanced, select General.
    Find and stop using hardware acceleration.

    Search web sites secure. Are there problems?

    If you have any problems with the current versions of Shockwave Flash plugin then check this:

    • see if there are updates for your graphics card disk drivers

    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

    • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

    https://forums.Adobe.com/message/4468493#TemporaryWorkaround

    • turn off hardware acceleration in the Flash plugin

    https://forums.Adobe.com/thread/891337
    See also:

  • Satellite L450 - how to view content streamed on an old television?

    Hello

    I was wondering if anyone can help. I have a Satellite L4500-13 x and would like to know if it is possible to view the streamed content on an old TV from my laptop for example YouTube. My TV just got a RCA inputs.
    I have a port external monitor on laptop and don t know if I can use it with some kind of adapter. Or do I have an HDMI converter RCA portable since computers HDMI output port.

    Hey Buddy,

    Normally it s no problem to use an older TV as external monitor. You probably need a VGA to RCA adapter, but it is a common and usually always served part with these older TVs they don t have a HDMI port.

    On eBay and other places, you can buy this VGA adapter RCA. That s all that you need for this connection.
    After that, you can switch between monitors using the FN + F5 key combination. :)

  • Required plug-in to view content

    I have Windows 7 and is an audio clip that came out perfectly but when posted to my class that a dark gray box appears saying "plug-in necessary to view the content."  Now, the audio plays, but the box is so sad.

    What can I do to get a different perspective on this box?  This plug-in is necessary?

    Great, thank you.  I am familiar with Blackboard but I can tell you that you cannot add rich custom code HTML and scripts in the presentation, so it can be customized to that degree.

  • Scroll view gal

    I have a listview with a container with an image and text:

                            ListItemComponent {
                                type: "item"
                                Container {
                                    layout: StackLayout {
                                        orientation: LayoutOrientation.LeftToRight
                                    }
                                    ImageView {
                                        imageSource: ListItemData.imagePath
                                        scalingMethod: ScalingMethod.AspectFill
                                        rotationZ: ListItemData.imageRotation
                                    }
                                    Label {
                                        text: ListItemData.imageText
                                        multiline: true
                                        horizontalAlignment: HorizontalAlignment.Fill
                                        autoSize.maxLineCount: 10
                                    }
                                }
                            }
    

    The images are taken with the camera and copied into the app folder. In the listview, the images are similar to (I assume) ninesliced photos of the image.
    Scroll the list begins to lag when there are 5 or more entries. It justs waits before displaying the next image, then pull it forward.

    I m guessing it has something to do with the images being the 'big' and their load and unloaded dynamically.

    I tried bufferedScrollingEnabled true and false.

    A way to solve this easily?

    OR should I just make thumbnails of some sort in the PRC? In this case, how?

    Thank you!

    You may need your images scale. If you view large images in the list, then it must decode and adapts these images when you scroll from top to bottom.

    It is possible to scale the images with QImage and cache thumbnails for later use. I suggest that you use a separate thread to do this and save thumbnails to tmp and load them from their uri in your list. If you pass image data directly to the display of the list, then you will need handle the load of caching and image memory yourself and you still need much more memory.

  • Can I only view content via a video call? Not through local presentations?

    Is it possible to display the content on my device, when we're just make a local presentation and not to make a video call?

    Hello

    It s not very clearly what kind of information you want, but from your last comment, it seems you want to view the content on the application of shared Office close to someone else, OK? It is not currently possible on the desktop version. You must use the Cisco close App on your device Pocket for this purpose.

    It seemed the cufflinks and your original question that you just asked if you could share your screen to the camcorder when not in communication. Sorry if I misunderstood you.

    / Magnus

  • Scrolling the contents of the html page

    Hello

    He

    If an xhtml MP or html page is the content that goes outside Simulator screen dimension (height) then how to scroll through the content that is not visible

    Auto-scroll down to the right of the Simulator screen does not work

    I need to change the file config.xml for that?

    Are you asking how to place content programmatically via JavaScript?

    Or simply scroll through the content in the storm Simulator?

    If it's scrolling content in storm Simulator, you must right click of your mouse and then make the gesture of scrolling.  In the storm 'left click' Simulator simulates a 'press' and 'right click' simulates a "touch".

Maybe you are looking for

  • help offline music

    Hello I'm having a problem with Apple music on my Android device. More specifically, when I Apple music download my music for the game in offline mode, as he begins to any song I chose in a playlist, it won't finish the song and skip to the next song

  • I would like to report an error of Word in Portuguese Thunderbird. How can I do?

    There is an error in Word on a question in the mozilla thunderbird Portuguese language. I just want to point out, and I don't know who. When I try to remove a contact, a question appears asking you if I'm sure I want to delete it, and there is an err

  • Is there a default way Touch Pad OFF! Pavillion g7

    I just bought a g7 Pavilion and the touchpad is driving me crazy.  I am looking for a button or which would make the touch pad OFF by default instead of having to double click it everytime I open the lid.  I said there is no setting for it, but I hop

  • Photosmart D7360: Photosmart D7360 with the new watch black print cartridge black color will be simulated

    When you install a new black cartridge HP the message "black ink cartridge empty. To continue with othe caolors pick continue. Black color will be simulated. I cleaned the contacts, clean print head, run test page, reset the printer. Still not clear.

  • Why I can't install Windows Media Player Firefox Plugin

    I tried to install the Windows Media Player Firefox Plugin without success. The version of Firefox is Waterfox, a x 64 version of Firefox.  What should I do to get this plugin to install in this version and other versions of Firefox as Cyrco x64bit,