Lack of space on my laptop

Similar Questions

• Time Capsule backups fail 'lack of space'

  I have two 3 TB time Capsules airport here at home network with an iMac and MacBook Pro 2.  All computers are up-to-date with the latest version of the software for Mac OS x (10.11.5) and the two time Capsules have been updated with the latest firmware yesterday (May 30, 2016).  I get the same error message that does not respect the backup, or for both, readers of time capsule due to lack of space.

  How is that possible?  I thought that TC permanently erased the last backup to make room for the next backup... aren't these differential backups?  Are a number of safeguards supposed to be kept?  Or over a certain period of time?

  Is the solution here to add a few more disk space for the time capsule airport with USB drives?

  Thanks for your help.

  John

  Time Machine usually works very well to delete backups of older (and small) "extra" type on the Time Capsule, but if the disk is full, and all of a sudden you add lots of new data to your Mac as an update of the operating system, or enlarge them or video files... which adds a lot of new data to your computer... and then the Time Machine can not delete older files to make room the new, much larger that new normal backup which would be necessary.

  When this happens, you have 3 Basic, in order of most expensive options on the bottom:

  • Add another new Time Capsule and start backups to go
  • Add a USB to a Time Capsule and start to go back up
  • Clear the Time Capsule disk and start over again with the backups with the drawback that you will lose your history backups

  In fact, there is a fourth option... that I do not recommend... and it is to go back into your files to backup using the Finder and delete older backups manually.  The drawback here is that it is a long and tedious process, and there is a very real danger that the entire file backup for Mac may be corrupt, make the file useless.

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• Failure of backup due lack of space

  Running Norton 360 and every time it comes to backup, that he can not due to the lack of space. Can I delete some of the data on my HP SimpleSave backup? If so how to do that?

  I found the problem late last night. The system was back up on my G drive rather SimpleSave drive H so, naturally, there is a lack of space!

  Problem fixed but thanks a lot for the quick response from you.

• I'm trying to free up some space on my laptop and I noticed that there are a lot of files of programs uninstalled still on it, I was wondering if there is a good free program to install.

  Hi am trying to free up some space on my laptop and I noticed that there are a lot of files of uninstalled programs still on it, I was wondering if there is a good free program to install to get rid of these files or is there any other easy methods I try I wound appreciate the help thanks

  Where are all these files of uninstalled programs located?

  Usually, when you uninstall a program, all files other than the game save files, customizers, or similar are deleted automatically, and those who are 'left' files are usually readily identified you can manually delete directory.

  You can also see if free Revo Uninstaller will help-->

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  The same page includes a download button for the free trial of the 'Pro' of Revo Uninstaller version (currently $19,62 if you buy it).  Version Pro is said to "Extended searching for leftovers - more advanced scanning algorithms" compared to the free version.

• CREATING LIBRARIES DOES NOT DUPLICATE YHE SPACE IN THE LAPTOP

  Good evening.

  CREATING LIBRARIES DOES NOT DUPLICATE THE SPACE IN THE LAPTOP?

  TO SOLVE THIS QUESTION CAN BACK UP ALL MY FILES IN LIBRARIES?

  Thank you very much

  Good afternoon

  I'm sorry. I WASN'T CLEAR.

  WHAT I MEANT WAS: IF CREATE A FILE OR A FOLDER IN C: AND THEN I COPY THE SAME FILE OR FOLDER IN THE LIBRARY, I DOES NOT DUPLICATE THE SPACE IN THE LAPTOP. ?

  I DON'T KNOW TO USE LIBRARIES.

  FOR EXAMPLE, IF I CREATE A NEW FOLDER WHERE TO SAVE IT: IN C: OR DIRECTLY IN THE LIBRARY.

  THANK YOU SO MUCH FOR YOUR RESPONSE.

  I M SORRY MY BAD ENGLISH

  Hello

  The libraries contain all the physical files. They are virtual folders that display only the files that are located in other physical folders on the hard drive.

  See the following links for more details.

  Work with libraries:

  http://Windows.Microsoft.com/en-us/Windows7/working-with-libraries

  Libraries: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/libraries-frequently-asked-questions

  Libraries - Microsoft Windows:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries

  Concerning

• Hello! I have CS5.5 Production Premium installed and now downloaded and installed CS6 PP Upg. Problem is the lack of space on the disk. What I can uninstall 5.5 or the Upg 6 should it work? I can move the 6 if necessary.

  Hello! I have CS5.5 Production Premium installed and now downloaded and installed CS6 PP Upg. Problem is the lack of space on the disk. What I can uninstall 5.5 or the Upg 6 should it work? I can move the 6 if necessary.

  Upgrades need not have the old version installed in order to work properly.  You can remove the old version if you wish.

• Backup on USB fails for lack of space; but it's a blank disk and there is no files on it!

  I have improved my NV + v1 (4.1.14) with 4 x 2 TB drives and I met the 4 k block size problem. So I'll try my backup device so that I can factory reset it.

  The current size of the volume is 1.3 to, so I took on one of the 2 TB drives to use as a backup via USB. 1.3 TB should fit easily in 2 TB, right?

  I added the 2 TB drive to the front USB port and formatted in ext3, it shows very well in stocks and a space free expected.

  So I made a backup and the source = task share / dest = USB/Sharename/and he ran.

  It works for a few minutes and stops with this error:

  Encountered error copying data from the source ==> /USB_HDD_4_1 path / / bla due to lack of disk space. [Job 003]

  I look at the USB and it is FULL. Zero byte available. He made a few records, but they are all empty.

  What is going on?

  Are there hidden files (.appledouble, etc.)? I ran BlueHarvest on the volume before the backup, and he deleted a bunch of them. But not 2 value of TB.

  I use this volume mainly with my Mac... am I missing?

  Any help is appreciated! Thank you

  OK, I got the multiple partition problem.

  When partitioning a disk with Mac disk utility, it creates a partition from FAT32 MASK called EFI which is used for Intel to start. The EFI partition is confusing RAIDiator and leading them to try to use the small EFI partition instead of the large main.

  Since I am not start this drive (it's only for backup), it is safe to remove it. You must enable a debug option to see the partition in disk utility. Google search for "EFI Partition delete on mac" to see how to do it.

  Also, I used EXTfs for mac by Paragon Software that allows you to create and mount ext3 on your mac partitions. http://www.Paragon-drivers.com/ExtFS-Mac/

  Backup operation runs now... If all goes well, it ends with success!

• OneKey onekey lack of space, how to resize?

  Hello

  Already, I read several post, but does with a solution.

  Just get a Lenovo G50 - 70A with windows 8.1. First thing to do was to make all updates (more than 1, 3 GB). After that I got all the updates, decide to make a make a backup with Onekey, so that I could restore with the new updates, in case of problems.

  The laptop has 2 drivers (visible), "c:\". "with windows 8 and"d:\ ". "with Lenovo Onekey.

  When I tried, the Onekey, he says that I need 29, 50 GB for backup and only 22, 50 GB (to a 25 GB disc).

  1. How do I resize the disk with OneKey, for to have my backup and have still Onekey working (for what I read, if the player OneKey is resize, OneKey will not work!) I can't believe it's true, do not in any sense.

  2. can I I resize my driver with the SB, without affecting the OneKey? I usually 1 disc with so and another disc with my personal data. Is I need to collect, format, the SO, I won't lose my data.

  Thanks for the help and we hope this topic helps others too.

  Hello

  My problem is solved. And I'm going to say what I did, and what was the result.

  My laptop is the G50-70 has

  OneKey Version 8.0.0.2105

  The windows show only 2 drivers for the SO and Lenovo D: backup C:. However there are other partition but are hidden from Society.

  After all the updates of windows, I begin the OneKey to perform a new backup. The drive for backup D: have a space of 25 GB, when I tried to make the backup here, it says that I don't have enough space (see my message of previews). So I made a backup to an external driver. When the backup finishes, the backup folder have only about 16 GB! So to copy the folder to the backup driver (D.)

  For security reasons, I also did a recovery USB disk as indicated by Solid_Cruver

  Here is the tutorial how to make a recovery USB disk

  After that, I shrink the driver for 375 GB C: and creat a new driver F: with the new space.

  Then start Lenovo and select the recovery option. The letters for the spectacle of drivers are a little different, D: E: drive. (not due to make it smaller and pilots, but system restore see differently). I selected the folder I copied on the D: drive (on the recovery system is E with my new backup.)

  The ER was back without any problem.

  I did this twice! And it worked.

  Note: I have never start OneKey before I made any changes.

  So, after all this, I have:

  -My backup on Lenovo driver for backups

  -A USB key with a recovery system (not tested)

  -A new driver for my personal data

  -The driver of SO shrink

  I hope it helps someone.

• Lack of space on my c drive!

  I tried to reduce the allocation of disk space for system restore free space on my c drive

  but when I do the amunt of free space on the disc does not change I do something wrong?

  I also tried to do the same thing on my drive (partitioned) D but with the same result.

  Assuming that your machine is running fine except for lack of disk space, you may need to completely disable System Restore.  When you do this, all restore points are deleted.  After you disable the system restore, restart your machine and then re-enable the system restore and set a Restore Point.  That should reduce the amount of occupied disk space to only the single restore point.  It's time to specify the maximum amount of space for Restore Points take care.

  "How to disable and enable the system restore in Windows XP"
    <>http://support.Microsoft.com/kb/310405 >

  HTH,
  JW

• Need help to save space on the laptop; question related to enforcement of a Anthony

  I am trying to save space on my drive of the laptop and looked at my download folder and "Odile" application takes 118 MB

  I want to know if it's ok to delete it or whatever it is that will affect

  Thank you

  Original title: download Odile

  I am trying to save space on my drive of the laptop and looked at my download folder and "Odile" application takes 118 MB

  I want to know if it's ok to delete it or whatever it is that will affect

  Thank you

  Hello

  118MBs is a minimal amount of space on a hard drive and even if deleted will make no difference to your disk space issue.

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• Lack of network card for laptop HP Pavilion

  I use my laptop at home for about 8 months now and decided to downgrade from Windows 8 for Windows 7 Home Edition. This was done due to the frustrating nature of Windows 8 etc. I was able to start my CD and install Windows 7 but can't connect to the wireless network. Router is as well as all other smart devices use. I get an error message saying that my network card is missing.

  My laptop was running windows 8 64-bit and is now running windows 7 64 bit. Is it eay to fix. I am not a Curmudgeon, instructions or advice would be so well in simple terms.

  Thank you

  Chappers

  My, that's quite a list you have there.

  OK... by the numbers...

  First, install the chipset driver and restart. The first file listed. Install the SMBus and USB 3 controllers.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103913-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5275619 & sw_lang=.

  Network controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112616-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0007

  PCI device:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103762-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5275619 & sw_lang=.

  Unknown device:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105047-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5275619 & sw_lang=.

  If you need graphics driver, run the AMD Mobility Radeon driver verification tool to the link below and it should find the correct graphic driver for the graphics card in your notebook.

  Install the graphics driver second (just after the chipset driver) and reboot.

  http://support.AMD.com/us/gpudownload/Windows/pages/radeonmob_win7-64.aspx

• HP laptop - 15-ac151dx: lack of drivers for HP laptop - 15-ac151dx

  Hello
  
  I recently bought the HP for laptop - 15-ac151dx. It came with 10 Windows pre-installed, but I had to install Windows 7 (64-bit) x on it for a professional matter.
  
  I had no problem to find most of the drivers through official support page: http://support.hp.com/us-en/drivers/selfservice/hp-15-ac100-notebook-pc-series/8499326/model/1019320...
  
  I had a hard time finding the appropriate controller LAN driver, but I found it finally. However, Miss me him still including two drivers of theses.
  
  Mobile 5th generation Intel (r) Core USB Controller xHCI - 9CB1
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_80C1103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_80C1103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03
  
  Unknown
  ACPI\MSFT0101
  * MSFT0101
  
  Please can you help me with this issue?

  PS: Please forgive my bad English

  Hello:

  For the first download, unzip and run the installer from the link below application.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

  2nd, you must install the hotfix from Microsoft...

  https://support.Microsoft.com/en-us/KB/2920188

• Mini Mac lack of space - 209GB private folder?

  Hello. Someone please help. My user folder uses only 150 GB, my hard drive is 500 GB and yet I have 50 GB left! FDI all sorts

  I tried 'disk inventory X' and "Disk space" but no one could find the data so after some searching on Google I came across a Terminal command and tried. That's what I found:

  sudo-chxd s 1 /.

  Password:

  10 M /. DocumentRevisions-V100

  388K .fseventsd

  1.2 G. Spotlight-V100

  0 B /. Trashes

  0b climbing.4

  36 G/applications

  2.6 M "/ bin"

  0b /cores

  0 b/data

  4.5 K/dev

  1.0 K/Home

  5.7 M Software /Incompatible

  6.9 G/library

  K/net 1.0

  0 b/network

  0 b / opt

  /Private 209G

  / Sbin 980K

  17 G/system

  142 G/Users

  1.1 G/usr

  /Volumes 4.0 K

  413G /.

  Total of 413G

  I had a quick glance in the partnership, but it does appear that 5 GB! What is going on? Help!

  If you have a time capsule, it could be local time backups of machine waiting for access to your time capsule.

• Lack of space disk or memory, cannot display the requested font. Outlook blurred fonts

  After I've been using Word and Outlook for awhile, I get the following message: there is not enough memory or disk space. Word cannot display the requested font. Once I get this error message, my fonts are truncated in Word and Outlook.

  I am running Windows Vista 64-bit Home Premium with Office 2007. I have 4 GB of RAM, with settings in automatic mode (Windows detect).

  I'm not a power user. I googled and searched Microsoft help, nothing helps.

  My brand new computer becomes almost unusable! Help, please.

  kimlife,
  Thank you for visiting the Microsoft Answers community forum.

  There are a few things that can cause this.  One is a damaged normal.dot template, one is a damaged printer driver, and the other would be a sort of third part add in.  Start with the simplest to try so that replaces the normal.dot template.

  Click Start, click search, and in the search for box, type normal.dot.  There should be a search option you can check "Search hidden files", which is checked.  If it does not, try searching * .dot.  It can be difficult to find because it is a hidden file.  You may have to go into options files and make sure that 'show hidden files' are ticked.  Whenever you find the normal.dot file, rename the old.dot and restart your computer.  Open Word and it will create a new normal.dot template, which is what Word uses as a document is empty by default.

  If this does not work, read this article about a third-party add-in that can cause this problem:
  http://support.Microsoft.com/kb/906899

  Let us know how it works and if you need additional assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.