LAPAC 1750 PRO - rename associated Clients / Stations

Similar Questions

• LAPAC 1750 - radiation pattern

  Hello

  can someone please provide me with information on the radiation of LAPAC 1750 Access Point diagram?

  Instead of using trial and error that I would sooner plan the deployment of units based on wireless fingerprint, so I can get appropriate spacing etc.  The information that I found that I can't decide if the unit is best ceiling or wall.  Is the unit of directional radio frequency signals come only from the front, or they go through the back too?  This could have repercussions on the interference seen on the floors above the unit.

  Thank you

  Pete

  Answer:

  No documentation but the ceiling is preferable, given that the dipole is used.

• Satellite Pro A120 - what docking station is compatible?

  Hello

  What model of Toshiba Docking stations are compatible with Toshiba Satellite Pro A120. I can't answer this question on google or the Web from Toshiba site.
  Thanks for help.

  Hello!

  Have you checked the user manual? You will find the answer! ;)

  I checked and you have the Toshiba Advanced Port Replicator III. If search you with Google for it, you should find a few online shops where you can buy it.

  Good bye

• Windows XP Pro 64 bit/Client: Business

  I purchsed this drive thinking it was a normal XP Pro 64-bit. It will not work properly and I see that the disc says Licensing on it in big letters and system... Windows client: Business. I think it's something used for servers?

  At I have to take this disc also said as not for resale and no back. But I am wrong, I can't use this as a normal operating system to my computer?

  Return the drive to the vendor and request a refund.  It is not authentic. Carey Frisch

• Win 7 cannot find the Premier Pro file associations

  Win 7 can't as the file .prproj is a Premier Pro. When I go to set default programs, Premier Pro is not yet listed or the other Production Premium CS6 programs so it seems that all associations with Production Premium disappeared. The program is still there in Program Files and my desktop shortcut still works. Any ideas on how to solve this problem? BTW, I did a reboot and it has not fixed.

  I had to reinstall to fix. Thank you windoze.

• XP Pro printing error "client machine: \\TOOLSHED.» Error code Win32 returned by the print processor: 53 (0x35). "

  I have two PCs connected to a "2wire gateway" I got ATT.  I can read and write files to write to the network, but I can't print from the remote computer or client.

  Hi KennethBurns,
   
  -Are you connected to any network domain? If so, contact the system administrator to solve this problem.
   
  Here's a similar post on this issue. Follow the suggestion given by "Afzal Taher - Support Engineer" to solve this problem:
   
  Error code Win32 returned by the print processor: 2147500037. Error__ not specified
   
  Note: The suggestion given in the link is applicable for the Windows XP operating system.

• LAPAC 1750

  I updated the firmware on the AP and it works very well for me, but when my client installs it is impossible to connect to the network.  Void connected nic cable directly to his laptop and it can connect just fine.  The AP continues to change from green to blue that tells me that something is connect, but may not obtain an ip address.  Any ideas?

  It should work if connected via Ethernet to the airport of Apple time capsule.

• Cisco 1250 12.4 (25 d) JA customer dot11 associations does not age

  Hi all

  I have a stand-alone Cisco IOS 1252AP we have a number of SSID (MBSSID-guest mode), which is a public one.

  It was found after IOS upgrade customers associations come more and more and never seem to timeout, even if they are no longer associated, following the example below:

  Dot11 THEAP #show associations

  802.11 client Stations on Dot11Radio0:

  SSID [XXXXXXXXX]:

  MAC address IP Device Name Parent State

  0023.322C.946C 0.0.0.0 unknown - homes Assoc

  581f.aa41.5fdd 0.0.0.0 unknown - homes Assoc

  9084.0d2c.ec61 0.0.0.0 unknown - homes Assoc

  dc2b.615b.CE65 0.0.0.0 unknown - homes Assoc

  THEAP #show dot11 Association dc2b.615b.ce65

  Address: dc2b.615b.ce65 name: NONE

  IP address: 0.0.0.0 Interface: Dot11Radio 0

  Feature: Unknown software Version: NONE

  CCX Version: NO customer MFP: Off

  State: Assoc Parent: auto

  SSID: internode

  VLAN: 5

  Hops to Infra: 1

  Associated clients: 0 associated repeaters: 0
  Is this a bug?
  I noticed that this only seems to happen on our dot110 radio (b/g), perhaps because of what is a common client.
  I tried to add the following line to see if the default value of 60 is broken
  dot11 activity timeout default unknown 70

  Are there any suggestions, or if someone else hit the same problem?

  Thank you very much

  Hello

  Here is the bug I see... This requires a study more... Please do not hesitate to open evidence of the TAC with us...

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl98313

  Concerning

  Surendra

• What is the max memory supported by windows xp pro 32 bit

  I know that XP supported 4 GB of RAM when he first left. I want to know is if, throughout its updates, it went to 8 GB in the 32-bit version of XP pro

  All clients NT 32-bit (NT4 Workstation, Windows 2000 Professional, Windows XP, Vista, Windows 7) support a maximum of 4 GB, none of them do support more than that.  Note that some versions (such as the Starter editions) may be less than 4 GB supported.

  John

• HP laserjet pro p1102w: hp laserjet pro p1102w does not work on windows 10 - printer needs attention

  I installed Windows 10 on my HP PavilionX2 about two weeks ago and after a lot of false starts but I finally going.  I set up my printer HP Laserjet Pro 1102w associated with the installation of HP application and got new drivers, etc.  The installation was successful.  When I tried to print.  I received the message that my printer requires attention. I use generic cartridges, which seems to be contributing to the problem.  However, I discovered that the printer would be finally print everything I sent him a few hours later.  So, every time I want to print I just ignore the message about needing to care, but I have to wait several hours before Windows 10 finally released the document for printing. I have no problems whether in point 8.1 of Windows.  It is new with Windows 10.

  My printer works on three of my Windows 7 computers and on three of my computers windows 8.1 and on my iPad, so there is no truth to the message that the printer requires attention.  The printer works fine, but it does not work in Windows 10.  Microsoft Community is no help.  I reinstalled the drivers at least three times using the HP Setup utility. It was worthless.

  Is it possible to fix this?

  Hi @technickel5,

  I see that you are having problems printing just the Windows 10 computer, the print job prints a few hours later after sending it. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would cycle power to the router, restart the computer and the printer to see if it will help.

  It can be assigned to the printer port. Devices and printers, right click on the printer and left click on printer properties, select the Ports tab and see if the printer is checked on TCP/IP and no WSD. Let me know how it is listed.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  Here is a list that the PSDR check on the computer.

  

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know. Thank you.

• P2314T works not connected to the Surface Pro 3 dock?

  P2314T can't get monitor to display, either says 'Enter Power Saving Mode' or says it is not connected.  Using Display connection port to MS Surface Pro 3 with docking station

  Had the same problem. I reviewed the Microsoft forum. We need to plug the power adapter into the dock Surface Pro 3 It will not work by the Surface Pro 3 battery alone. Solved my problem. It would be nice if I could use the dock as well mini display port and the port of the display at the same time surface. Did not work. If you have had the branch dock and still no problem, then MS noted for updating with the surface in the dock.

• Where can I get a SSL VPN client?

  I don't know much about vpn technology, but used the cisco 5.x client software and the software vpn client that ships with windows xp. Now a customer asks me to connect using an ssl vpn. I don't think I can do it with either of the vpn client packages I've used before? So what am I supposed to use? I looked openvpn and couldn't make much sense out of it. I registered on this site, but apparently this is not enough for me to access the software vpn ssl client.

  Michael,

  If you are the client establishing the connection to the server RA via SSL the way that it works is using regular internet OS web browser as Internet Exprorer, as it supports SSL as webvpn SSL, and the user credentials to open a session in WEBVPN leads, that's all that you need to connect to the server of your customer RA.

  exmple to connect to the RA through webvpn would be like:

  https://

  There are two things you need as to the requirements, and I quote from the link below.

  Requirements

  Before this configuration, make sure that you follow the conditions for remote client stations:

  SSL compatible Web browser

  SUN Java JRE version 1.4 or newer

  Cookies enabled

  Blockers disabled popups

  Local administrator privileges (only not mandatory but highly recommended)

  Note: The latest version of SUN Java JRE is available as a free download from the Java Web site.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008072462a.shtml#PREREQ

  PLS note any useful message

  Rgds

  Jorge

• Sorry, that a serious error has occurred which requires Adobe Premiere Pro stop! Frustrated.

  I get this error went indicating a project. Import media and then * bang * I'm hit with this error message. I searched around a solution and fails. It was working perfectly up to 4/5 days ago. I've also updated to the latest version of Adobe Premiere Pro via creative cloud.

  Can you help me?

  Thank you

  Eimear

  Ok

  Navigate to the folder documents-adobe-premiere pro - rename the 8.0

  Thank you

  Arjun

• Problem exporting in Premiere Pro

  I recently installed CS4 and I'm having problems to export my files. The video Media Encoder opens with the files in the list, but the name of the source is looking in the wrong place so cannot start work and I can't work on how to change it.

  Can I change the export file option. I don't know that there must be a simple answer.

  Can anyone help I just reinstalled Premiere Pro CS3 in desperation!

  The origin of the problem could be that you have deleted an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer or you still have a previous issue of first installed on your computer in this case, create a shortcut to the executable of Premiere Pro, rename it first shortcut and move shortcut to C: program FilesCommon files Adobe dynamiclink.

  1. close all Adobe applications.

  2. in Windows Explorer, navigate to c: Program FilesAdobeAdobe Premiere Pro CS4. (If you have installed Premiere Pro CS4 in one location other than the default of c: FilesAdobe, then navigate to your custom installation location).

  3. click right on Adobe Premiere Pro.exe (which can appear without the .exe extension), and then choose Create shortcut.

  4 rename the newly created shortcut just first. Important: The name of the shortcut must be exactly the first with no other characters - without extension.

  5. open a second window of Windows Explorer and navigate to c: Program FilesCommon FilesAdobedynamiclink.

  6. move the created shortcut that you created in the dynamiclink folder.

  It worked for me. Before I found it I tried all kinds of things to fix but it is great.

• My Windows Server 2003 Administrator password back to the old after reboot

  Well, it's quite strange and I think it affects my antivirus management. I can change the password using ctrl alt delete and it remains until I restart. When I reboot, it starts to complain that the new password I just. I can connect on the client with the new password I want to be, but he complains that the account must authenticate properly. I am at a total loss. Please help as I want to do out anti-virus for the client stations.

  Thank you internet.

  Leah

  Hello
   
  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Community forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Server 2003 Forum. You can follow the link to your question:
   
  http://social.technet.Microsoft.com/forums/en-us/home