LAPN300 Workgroup Bridge cannot be seen outside the local subnet

Similar Questions

• HP MSA2324i, new volume / LUN added, cannot be seen by the host ESX 4.1 (fine old LUN work)

  Hello

  I have a vSphere Essentials Plus 4.1 cluster that is connected to 2 x bays HP MSA2324i SAN, we have 2 x hosts and both can see current volumes / LUNS absolutely perfect (vMotion and migration of VM offline all work as expected). I'm starting a consolidation project virtual disks / volume of the San 2 x, however a new volume I created on a network SAN cannot be seen by the other host.

  The new volume has been implemented exactly like the others, but of course with a unique logic for mapping unit number explicit, but when scanning the iSCSI HBA the new LUN is never found :-(

  I was wondering if others have had also this happens to them and know why this may be implemented?.

  (This is a company that I joined, it's my third week, and that they had also no VMware subscription on their reunification since 2012, otherwise I would be to connect a call to technical support of VMware, by train to get the sub upwards and running)

  OK I think that might be the cause, I came across this recently maximum LUN ID is 255, change the logic unit to a number smaller than 255 ID number and try again, let us know how you go!

  vM

  -----------------------

  VCAP-DCD / VCAP-DCA / VCP-CLOUD / VCP - DT / VCP5 / VCP4

  -----------------------

  vMustard.com

• Could not start the print spooler service, to get the error message: 1053-service cannot be answered on the local computer.

  Original title: Print printer printing

  I can't get the print spooler to turn on, get error 1053-service cannot be answered on the local computer. I tried password admin and services, but it will not turn on. Any suggestions?

  Hi, DUBOIS,.

  This error occurs when you do not have the latest service pack for Microsoft .NET Framework 1.1.

  Please answer the following questions.

  1. What operating system do you use?
  2. What is the brand and model of your printer?
  3. Did you of recent changes made to your computer?

  While your answer above information, refer to the suggestions for the following link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  Hope the above information helps.

• 5 view customer disconnects immediately outside the local network

  I work with the 60 day trial of view 5.0 5.0 w/ESXi. Everything is configured and works well inside the LAN, but we have not been able to connect outside the local network. We have a single sign-on server that is associated with a single security server. All the rules of firewall, file server and configuration procedures correspond to installation and administration guides. Try to connect via PCoIP from a variety of devices.

  The client connects, check credentials, allows you to choose a desktop, opens the window of the office, but him freezes and shut up saying: 'the connection to the remote computer is complete.' This happens every time.

  Anny suggestions?

  Hello

  First of all, are you just a black screen that stays there for about 30 seconds then it closes with error? It is usually a problem with the connection to PCOIP. Could be firewall rules blocking a port, it could be the NATs. Security servers can be hard enough for the Setup program.

  First check and see if you can connect by using the view client and RDP Protocol. Also, make sure that through the firewall, the Security Server can access the VLAN Office on tcp/udp 4172. Search for NATing in the external firewall and that your security server for installation of the connection to the server has the external IP address that there are listed (not the internal IP of the server security).

  If you have a team network to talk to them and see if they can track packages. Look at the logs on the server and Security Office.

  You don't have to worry about this error. Security Server does not need to be on the field, in fact it should not really be on the field. It somewhat defeats the purpose of having a security server. The client has authenticated the username and the password and is spent on the desktop then ok. If the Office is unable to connect the user for a reason, then they will be left on the desktop windows request a user name and a pass.

  Hope this helps

  Phil

• the attachment name is pale (without colour) and cannot be seen until the passage of the mouse

  The name of the file attached to an e-mail received can be seen clearly (it's not colored) until you move the cursor over the name of file, on the bottom bar of the e-mail message.
  It just happened for me to roll back the theme default "autumn reverie" that I installed last week, and the issue has been resolved. Always displayed, however.

  You'd better this post, do of the fall theme reverie. Thunderbird cannot predict and anticipate the other themes display text/context...

• ACI - cannot reach hosts outside the fabric until the traffic is inititated from a host outside in a host connected to the fabric

  I have a group of the same EPG and VLAN statically mapped ports on my fabric of ACI.  One port connects to a port on a stack of 3750 x uplink.  Hosts on the fabric, I cannot ping hosts on the 3750 until I have initiated traffic from hosts on the 3750 in the fabric.  Once it done on each host of 3750, they can talk to each other.  Why is this happening?

  Thank you!

  When traffic is a failure, the destination will probably not learned as an EP in the fabric.  You can check by looking at the operational tab of the EPG.

  Once you ping the 3750, we learn the EP and traffic works from the original source.  When the BD "Equipment Proxy" mode, the destination must be learned.

  If you change the mode of the 'Flood' comic, then inundate us and learn as a normal switch.

  Joey

• WRT1900AC of external storage outside the Local network

  I'm trying to set up my WRT1900AC router to access a USB attached as an external storage device. I can access the drive when I'm on the LAN, but I had no success accessing outside my local network. I enabled the FTP option in the section of external storage. With the FTP option is enabled, it then points me to the IP address that my cable modem ISP attributed to the router (192.168.0.2). Obviously this won't work from the outside world because it is not the IPV6 address. I install my modem cable to the port before 21-the 192.168.0.2 address and tried to access from outside by using my address IPV6 (ftp://77.XX.XXX.XX:21) but it will not connect. I was hoping someone could point me in the right direction, as I obviously don't do something here.

  Hello, Steve99888. You must configure the settings of folder first. Check out this link.

• Safari crashes whenever I try to enter an address. Update, I tried all the different patches I've seen outside the reset to the factory settings and nothing works. Any help?

  SO, until this morning on my ipad safari worked well. I just tried then, serious in my address bar, type and the app instantly crashed. It happened repeatedly, any fixes I tried. Is this just a problem with the update, or should I take my iPad to the Genius bar and see what they say?

  I got exactly the same problem this morning. This has affected my iPad 2 and iPhone 5 s, both running on IOS 9.2.1

  No solution so far. I restore the iPad from the back to the top at the moment, but I am not optimistic. Will update when it's over.

• Visual Flight Path cannot be seen on the screen.

  Just install FSX on Windows 7.  I check and checking all the relevant boxes on the Panel appropriate and tied up the news Nav 1 VOR, but I can't get any screen.  Any known problem?  Or am I missing something?

  Flatcommissioncomau,
  No doubt to update your video drivers, you should also check your other hardware drivers (audio, chipset, etc...).  You can clean boot of your system and see if that helps.

  You can check with the forums of Games for Windows , because they have other specific information at stake.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot find seen recently the images...

  I have downloaded about 10 different images for a last week ppt presentation. (I downloaded versions with the leash of sea Adobe Stock). I wanted to put together a ppt for a colleague to the company for review before you buy the images. All images have filenames as [AdobeStock_42863038_WM.jpg].

  Now, I want to buy images. I search the name of the image and Adobe Stock said that there is no file with this name.

  How to easily return to the images I want to buy?

  Please type only the number of images on the Web site:Royalty free images, pictures and graphics. Adobe Stock

  For example just type 42863038.

• Cannot insert .aom file in the DW CC page despite trying various forum boards. Hoping that it is a problem of liaison and base folder organization. "Year" shows the page, but it cannot be seen in the browser.

  Hi people,

  I have a problem which can be laughable to some as I'm a newbie. I tried for weeks insert my edge .aom file animate CC published in my Dreamweaver CC pages with no luck so far. I hope it's just a problem of basic organization, the reissue of links/folder.

  That's what I've tried so far. I followed the standard basic instructions on various forums without success. I found that the folder structure that my Edge animate published was different from the default folder structure in a tutorial that I read. My containers are fluid but I kept getting 'the height is zero', "Width is null", until I manually inserted the dimensions in the code. Now, I get a "A" display on the page but still not animated in the browser. My homepage with its old animation intro works very well despite me trying to fix by moving files around a website that now looks like the dog's breakfast. I tried constantly to correct the links broken with mixed success. The list of broken links report shows some as 'unassigned assets' which I do not know how to fix.

  Thanks in advance for your help. I'm fast running out of Valium in order to find an answer will be a relief.

  See you soon,.

  G.

  Hi Gene, in fact anyone who can help would not need the versions "published", but just the original files / folders.

  Go to the project folder (example below) Select all, excluding the / publish the folder, then zip the selected items.

  

  Darrell

• Cisco router access outside the local network interface

  Hi all!

  I have Cisco router 892 (c890-universalk9 - mz.154 - 3.M4.bin) with firewall area and based on routing strategies.

  Everything works fine, but now I need to have the ability to access external router interface IP LAN addresses.

  For example, I PAT 192.168.4.1 port 8443 to the outside interface IP (93.93.93.2 for example) and I need to check LAN 93.93.93.2:8443.

  ! PAT:

  IP nat inside source static tcp 192.168.4.1 8443 93.93.93.1 - extensible 8443 SDM_RMAP_1 road map

  ! DynNat to the internet:

  IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0

  ! Routing policy

  SDM_RMAP_1 allowed 10 route map
  corresponds to the IP 101
  match interface GigabitEthernet0

  ! ACL 101 for routing policy

  access-list 101 deny ip 192.168.3.0 0.0.0.255 192.168.111.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.192.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.177.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.61.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.17.19.0 0.0.0.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 192.168.111.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 host 172.16.194.100
  access-list 101 deny ip 192.168.3.0 0.0.0.255 10.0.0.0 0.255.255.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 10.0.0.0 0.255.255.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.31.255.1
  access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.16.194.100
  access-list 101 permit ip 192.168.3.0 0.0.0.255 any
  access-list 101 permit ip 192.168.4.0 0.0.0.255 any

  ! ACL on the external interface:

  plug-in software component gi0 extended IP access list
  allow an ip
  allow icmp a whole

  ! External interface

  interface GigabitEthernet0
  Description $ETH - WAN$
  IP 93.93.93.1 255.255.255.240
  IP access-group gi0-in in
  NAT outside IP
  IP virtual-reassembly in
  EXTENT of the Member's area network security
  IP tcp adjust-mss 1452
  automatic duplex
  automatic speed
  card crypto SDM_CMAP_2

  ! Inside DMZ interface vlan:

  interface Vlan4
  IP 192.168.4.254 255.255.255.0
  IP nat inside
  IP virtual-reassembly in
  security of the members of the DMZ
  IP tcp adjust-mss 1452

  ! Allow outbound traffic to DMZ to Internet:

  Allow_All_ACL-DMZ extended IP access list
  allow an esp
  permit tcp host 192.168.4.1 host 192.168.111.2 eq 1521
  refuse the 192.168.4.0 ip 0.0.0.255 192.168.111.0 0.0.0.255
  refuse the 192.168.4.0 ip 0.0.0.255 172.17.19.0 0.0.0.255
  allow icmp 192.168.4.0 0.0.0.255 any
  ip licensing 192.168.4.0 0.0.0.255 any

  ! Allow incoming traffic from the Internet to DMZ:

  WAN_DMZ_ACL extended IP access list
  allow tcp any a Workbench
  permit tcp any any eq ftp
  permit tcp any any eq 990
  permit tcp everything any 51000 53000 Beach
  permit tcp any any eq 995
  permit tcp any any eq 465
  permit tcp any any eq www
  permit any any eq 443 tcp
  allow icmp a whole
  allow an esp
  permit any any eq non500-isakmp udp
  host ip 212.98.162.139 permit 192.168.4.0 0.0.0.255
  IP 81.30.80.0 allow 0.0.0.255 any
  IP 192.168.111.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
  IP 172.17.19.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
  host ip 172.16.194.100 permit 192.168.4.0 0.0.0.255
  host ip 172.31.255.1 permit 192.168.4.0 0.0.0.255
  permit ip host 172.31.255.1 172.17.193.100
  refuse an entire ip

  ! Focus on the area of firewall:

  type of class-card inspect entire game DMZ_WAN_CLASS
  match the group-access name DMZ Allow_All_ACL

  type of class-card inspect entire game WAN_DMZ_CLASS
  match the name of group-access WAN_DMZ_ACL

  type of policy-card inspect DMZ_WAN_POLICY
  class type inspect DMZ_WAN_CLASS
  inspect
  class class by default
  drop

  type of policy-card inspect WAN_DMZ_POLICY
  class type inspect WAN_DMZ_CLASS
  inspect
  class class by default
  drop

  the DMZ security

  
  area WAN security

  Security WAN_DMZ of the pair area source destination WAN DMZ
  type of service-strategy inspect WAN_DMZ_POLICY
  destination of DMZ_WAN source DMZ area pair WAN security
  type of service-strategy inspect DMZ_WAN_POLICY

  Maybe someone can help me to make Cisco to allow ports outside LAN using a NAT?

  I did this on Mikrotik easily = |

  It is due to the fact that they do not allow "hair pinning" by default, once this is configured, it will work.

  Martin

• Need help about Remoteapp outside the local network (2008 R2 Std)

  Hello

  We have installed and configured all the 4 services (RDGM, RDLM, RDWA, RemoteApp Manager). Inside the lan, all published remote applications work correctly but

  When accessing the log on credentials wan are invited on several occasions.

  We use a self-signed certificate created by the remote application server. We have installed the certificate in the certification of approved root authorities store.

  Question-is it possible to access remote app on the wan via this free sign certificate or we need to purchase a SSL certificate?

  Thank you

  Laros

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Design mode and mode browser in DW are different than when I saw from the local folder

  I'm brand new on Dreamweaver CS5.5 and here is my problem:

  I made an html page in dreamweaver with a banner, with an additional graph and text on top of the banner.  It displays fine in all browsers, when I've seen in the local folder, but when I open DW and view, it display correctly in all three design, alive and views of browser in DW.  If I change the css file until what he considers correctly in design mode, it displays more correctly since the local folder and it still does not display correctly in direct or browser view in DW.  If what I do is not going to display accurately in one of the views offered by Dreamweaver compared to the live server, what is the point of having this software?  I could just keep build Web pages in Notepad and upload with CoreFTP.

  Any suggestions?  Is it a setting I don't know that I need to change in DW?   Help, please.

  The problem is that you use "position: absolute" in your titlle, handbag and the navigation menu, which results elements at floats in browser windows, if you are not sure of what I want to say just try to resize your browser window and you can see it all looked up mess.

  position: absolute will appear differently in the different monitor (for example, 1024 x 768 and 1 440 x 1200) and done DW (from the preview screen is smaller quarter...)

  to resolve this, you must add "position: relative" your id = 'container' and move it back again... ".

• WiFi AR5007 802. 11 b / g adapter cannot talk about bridge WET11 Wireless on the same subnet

  Hello

  My HP Compaq Presario C700 VISTA laptop (a AR5007 802. 11 b / g WiFi adapter) and the printer are on the same subnet. The laptop is WiFi connected to my WRT54G2 router/switch and the printer is connected to the workgroup switch that connects to the router via the LinkSys WET11 Wireless Bridge.

  The installer works fine for over a year until he was there when my VISTA does not see any PC on the Working Group 3 weeks pass including the printer. However, the WAN access is not affected.

  I did the filming of following problems (in order):

  1. check the network settings on the laptop VISTA (x.x.x.29) and (x.x.x.201) printer and all look kosher.    (All my PC including notebook computer and printer have IP STATIC)

  2. check the router and the parameters of bridge and fines all eyes (router - XXX1, bridge - x.x.x.140).

  3 Ping printer, bridge, and other PC and received messages "Destination Unreachable Host" or "Request timed out". Although all are on the same subnet. Pingée router is OK.

  4 remove and re-add the wireless profile and tried to connect again. Same problem, no joy!

  5 started VISTA in safe MODE with NETWORK. Once again, the problem has persisted but at least eliminated applications as a potential source of problems.

  6. recycled power switch/router/workgroup bridge. No joy!

  7 WiFi connected other laptops to the same router (WRT54G2) and can ping other PC and printer END.    This means that the problem is limited to my VISTA laptop.

  8 given that the problem is on my VISTA and applications are not the source (see #5) of the problem, then probably the AR5007 802.11b.g wireless network card driver is original so I downloaded driver at HP and installed with version 7.3.201.25.  Problem is persistent...  Arhhh!

  Could there be something else that I missed? Can someone please help.

  Thank you

  You are the very welcome, John.

  Yes this driver will work fine on Vista Home Premium.

  According to the notes on the driver, it can just be run without uninstalling the current pilot you have on there now.

  After executing, you can confirm it 'takes' by going into Device Manager, expand network adapters, click the atheros wireless card, click the driver tab and you should see the installed version 2011.