W700 touchscreen works do not (hardware problem)

Similar Questions

• HP Pavilion 11-h010nr x 2 PC (touchscreen works do not)

  Product name: HP Pavilion 11-h010nr x 2 PC

  OS: Windows 8

  I have a HP Pavilion PC 11-h010nr x 2 for about 20 days now. I noticed that the touchscreen function does not work. I ran Diagnostics equipment for the PC HP (UEFI) tool and the touch screen worked during this period. I guess the problem must be Windows 8. Any help would be greatly appricated.

  Thank you

  Pipwax

  Thanks a lot for your offer to help, but the technicians HP suggested that I send the system for repair.

  Thanks again.

  David

• Yoga touchscreen works do not...

  Hey everybody,

  I picked up my Yoga today, and I love it. However, about an hour ago the touch screen went completely insensitive.

  The last thing I remember to do, before noticing the touch screen becomes unresponsive, was installing the Android SDK. (Well, I ran the installer, but it has not identified the JDK).

  So, here I am, with the touch screen not functional at all. Has anyone else had a similar problem? Does anyone have any suggestions? I tried the "refresh" and that did not work. I'll probably try the installation option / wipe in a bit. I guess that would tell me for some if it is a hardware problem or not.

  I really hope this isn't a design flaw with the 360 hinge causing problems. Really, I love the laptop and would not have enough to deal with hardware problems like this on the road. :/

  I will call support in the morning, I was hoping to get this resolved tonight if anyone has had a similar problem.

  Thank you!

  
  

• Palm Pre Touchscreen works do not at all

  My touchscreen palm pre is completely insensitive... I can't do anything at all...
  things I've tried:
  -remove the battery for 1 min or more (maybe max 10 minutes)
  -tried WebOS Doctor to restore (did not work said "cannot restore")

  I'm really scared its broken for good. the last time it worked was this morning. I upgraded 1.2.1 nite last and then this morning I tried to open an application (and I did not pass the loadup screen) I hope that did nothing. then after I turned it off...  I tried to turn it on and use the touchscreen and it did not work at all. I want to know if my warranty covers replacement (I was on sprint for more than 30 days) and that so I have to pay anything. someone can give me a solution to my problem with touchscreen or should I just get a replacement

  Please contact palm tech support online at the 877-426-3777. they can help you to test your device to see if it is broken or not.

  If it's broken, then you must submit for repair. the cost of repair is free, since your unit is still under warranty of 1 year.

  You can also opt to view sprint for replacement since they changed their policy of 30 days warranty for 1 year.

• Laptop 15-AC121DX: touchscreen works do not under Windows10

  Got this new laptop yesterday, and everything works fine apart from the touch screen, is not running when started under win10, was phone with 2 hours support, did all the tests, the display works, but finally started it does not work, has managed to find the latest drivers on the egalaxtouch site, still does not work tried later MS MS catalogue, I guess I have to wait for a update or bring her back? like the pc, fast, pleasant and 6 GB 1 TB for 399, but no touchscreen, not a matter of circuit breaker but would be nice if it works properly... and support site when I choose my model it is stuck in a loop constantly ask for the model number...

  Paul

  Try to remove grey pilots and EGalax driver, reboot and see which installs Windows 10. Should not install a non-compliant driver.

• Help! Update works do not, IE problems, restore missing files, can not solve the problem.

  Vista updates doesn't work not, error code 80072EFE do not allow me to update of the security definitions. Custom IE open with the 1st test of having to open twice, sometimes will not go back, scanned in the advanced system of care, AVG and Ad-Aware, have had several malware jump - rises, please contact me on what to do. Had the "winhelp" virus and I think I took it, I still have a "wininit' running program, but don't know if it's a system file. Please help me solve this problem. I'm out of ideas.

  PLEASE PLEASE PLEASE!

  See the MVP Rob Brown response to a previous post, involving the error:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1b2d58b7-1C00-45c7-8941-db8e15b3f031 >

  In addition, it would be a good idea to scan (mbam). http://www.Malwarebytes.org/MBAM.php>

• My Apple iPhone 5 touchscreen doesn't work not when the call comes. This problem is only in locked mode and mode unlocked when the call come it works normally. The problem is only locked Iphone and a just coming guard time. give soltn

  Hello can anyone give solution to my problem.

  my iPhone touch 5 works not when it is in locked mode and it's time all incoming call came the touch works do not. other times, the touch works normally wat is the problem. ?

  If you disturb not activated. Settings > do not disturb.

• My computer keeps freezing online. Does not work why. It is not a hardware problem.

  My computer keeps freezing, when I'm online. It happens randomly when tube to navigate or go on you. This isn't a hardware problem (new processor etc) I ran the event viewer and stumbled on this... Product details: Windows operating system ID: 615 Source: Security Version: 5.0 component: security event log symbolic name: SE_AUDITID_IPSEC_POLICY_CHANGED Message: IPSec policy agent changed: %1 PolicySource: %2 %3

  Can anyone help?

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · The computer is connected to the network or the field?

  · You use internet explore to browse the internet?

  · If so, what is the version of the same thing?

  I suggest you to run the check, and online virus scan if no malware or viruses detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• volume buttons not working do not, not hardware related

  I have a weird problem with volume controls on my iPad 3, iOS 9.2.1 - they do not work, but this isn't a hardware problem.

  When on the main screen or in all applications, the volume buttons do nothing. In addition, no noise (and I don't have a silent ringtone value).  If I drag it to get to the Control Panel, the volume slider is simply not there.

  However, the second that I plug in headphones, everything started working as it should, the volume slider reappears in the control panel and all is peachy. What works too, even without the headphones, is if I go into settings/sounds - volume buttons work and the sound is on.

  Thanks for any advice.

  Looks like it's stuck in headset mode which is a hardware related issue you can read more here

  iPhone stuck in mode "headphones listening".

• all-in-one touchscreen printer does not work

  I have printer e-all-in-one-hp officejet pro 8600 - n911

  The touchscreen doesn't work or light up. The side panel will sometimes show a red x or a?.

  Bought in February. Tried all the troubleshooting online ideas

  I'll see if your able to do a firmware to the printer, you can access that if his etherneted to the router in the SAP (built-in Web server) or wireless IF that is not the problem I call 800-474-6836 and talk to tech support of HP to get the product being replaced.

  follow these steps to access the SAP of the printer

  If the printer is installed on a computer, open the Solution Center Lite software, click the printer Preferences and click on "homepage (EWS) printer" once loads pages click on the tab "Web Services" and click on "Product updates" (that is to the left) at this time, it will install the updates

  IF its USB connected, then you will need to find a bit more on your printer. The 8600 has 3 versions click on the version you have, and it will take you directly to the firmware for this model page.

  N911a

  N911g

  N911n

  IF those who do not work, call us at the 800-474-6836

• ProBook 450 - second series of recovery media, blue screens windows 7 (win 8 okay, not the hardware problem)

  I had a new HP probook 450 G1.

  Immediately, I swapped the 750 GB for one SSD drive and tried to install Windows 7 from the recovery media. The operation has failed. Contact HP support, they sent new media.

  I used new media. Windows 7 operating system installed. As soon as I install the drivers, the PC goes in a loop of the blue screen.

  I can install the chipset drivers and wifi. Don't know what the other driver is causing the blue screen. I can also install from the windows media 8, so this isn't a hardware problem - wife hates just windows 8.

  Basically, please either give me a few troubleshooting steps or I'll go back to the PC. I'm NOT insterested in a manual process long to determine which driver is the problem and the recovery download media manually the drivers one... should work.

  After you have reinstalled the original 750 GB hard drive with the replacement media, I managed to an attempt to "recover". So, I decided to sit and try, by the process of elimination, all drivers.

  It turns out that the technology Intel Rapid Storage Technology driver was causing the problem. When I installed everything BUT that, the laptop works very well. Notice that I use a fairly new SSD Crucial of M500. It is quite possible there are other people out there see it. You really need to install the driver of rapid storage technology, it is fast enough - not not even 100% sure what good to give the driver.

  So I gave myself wrong guidance by the initial recovery of defective media. The second group of work recovery media, but the version of the driver intel 12.7.3.1001 does NOT work with the Crucial M500. I checked the Intel site for driver downloads, and it was not clear that they have a newer driver appropriate right now. Maybe someone else can tell?

• Aspire 7750 G internal mouse has stopped working! Hardware problem or software?

  Quite simply the query. The mousepad on my old Aspire 7750 G does not, and all the settings suggest that it works correctly. My external mouse (via USB port) works very well; It's only a problem with the pad on the computer itself. Could this be a hardware problem? The computer has 4 years, so no guarantee, unfortunately.

  If it is not material, can someone help me with advice on how to fix?

  Sorry the question stupid, but... have you tried pressing Fn + F7?

  If you already done and are still dead, have you checked the Device Manager if it appears?

• BB10: Touchscreen doesn't work is not in the Middle

  Hi people,

  

  In my application, the touchscreen does not work in the middle (see figure). What I mean is that it does not have any key event. So if I try to press a button which is in the Middle, it not to press. It has the same problem in all of my app (about 14) screens.

  And the problem is not the device itself, because the touchscreen works perfectly in other applications (such as the browser). I even tried my app in another device with the same results.

  Any idea guys?

  I ve been struggling with this for a while now.

  Thank you all.

  Solved!

  The problem was my activity indicator. It was in the middle of the screen, and even if it was not visible, he kept receive key events.

  I solve it by putting this line inside the activity indicator (QML):

  touchPropagationMode: TouchPropagationMode.None

  Thank you jalue.

• Problem with the touchpad doesn't work is not on the computer.

  Today, I was on YouTube, listen to music, when I turned the volume up to full. My laptop (ASUS) is a VERY high - pitched shrill sound that would not stop until I turned the laptop on sleep. When I turned on the laptop back, the screeching stopped but my Touch Pad stopped working. Fortunately, I have a USB mouse which I use now. I tried following the instructions to activate the keypad, but it does not work. I restarted my computer, and that did nothing.

  Help would be GREATLY appreciated.

  (also, I had problems with this laptop in the past, involving having to solve every time turned to have internet access, but a day that goes by and now the internet accessibility works very well.)

  Hi Lucie,.

  Thanks for posting your query in Microsoft Community Forum.

  What is brand and model your computer?

  Problems with the touchpad can occur due to a number of causes, including cables that are not connected properly, lack of updates, corrupt or drivers incompatible or because of hardware problems. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Try to run the suite of equipment fixit and see if the problem still occurs.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  See the additional steps provided in the following article.

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• USB 3 doesn't work does not Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  ASUS sabertooth z77 motherboard, bios updated. USB 2 USB 3 does not work. Have uninstalled root hubs that show problems and restarted the computer, do not solve the problem, still getting the "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "message under properties. Specific location of the hub of the problem: ASMedia USB 3.0 eXtensible Host Controller - 0096 (Microsoft).

  Please notify. If it is a regedit fix, please help with details. Thank you!

  When I rebuilt my system, I went step by step in reinstalling the software.  I understand that better, my usb problems related to Asus motherboard utilities.  These are not entirely compatible Windows 8 and introduce problematic drivers.  Finished to start my Acronis True Image boot USB and backup of backup image of this morning.  Problem solved.

  Staying away the Asus utilities for now... btw, Asus technical support on my problems was totally useless, even if the code 19 errors point to hardware problems, which are covered by the guarantee.

  If you use the Asus utilities, you may be able to rebuilt without them...