laptop does not connect to the external display

Similar Questions

• Laptop does not connect to the internet. error cannot display Web page

  Original title: laptop does not connect to the internet. How can I fix it?

  I'm trying to get my laptop to connect to internet, but it will not. It keeps telling me that it cannot display the Web page. The wireless connection is the link and he sees the laptop, but it's like he goes. How can I fix it? Help!

  Hello

  1. Have you tried using anythird party web browser to connect to Internet?
  2. You use Internet Explorer to surf the Internet?

  If you receive error message cannot display Web page in Internet Explorer, then you can check the link below to fix the problem.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

  My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

  Ruizgeraldine

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

  The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.
  
  I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  You must download and install the full feature software and drivers for the printer.
  
  Then unplug the printer and install the software.
  
  Do reconnect the printer until the installation program invited to do so.
  
  Once the installation is complete, restart.
  
  You should then be able to use your printer in Win10.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• 15 - r074TU: laptop does not connect to the router

  Day sum... .my laptop (model No. 15r074TU) with window 8.1 does not connect to the router that is D-link

  I uninstalled my driver reinstalled again, but it didn't work... even if I formatted my laptop, reconfigure the router and... done with all possible measures to overcome this problem, but have ultimately failed. Please suggest ways to tackle this problem as soon as possible...

  Follow the wizards in the following forum sticky and troubleshooting.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/common-fixes-for-wireless-connectivity-issues/m-p/4831601#M86871

• My laptop does not connect to the internet. .

  My laptop does not connect to wireless internet.   All wireless drivers are in place, but it's like windows is be fooled into thinking that they are not there. A Trojan horse has been proposed, but I don't know what to do.  My ISP is also intrigued by this. Any suggestions would be welcome.

  Hello

  1. which browser is installed on the computer?

  2. do you get an error message?

  3. were there any changes (hardware or software) to the computer before the show?

  Method 1:  Perform the steps from the link below and see if it helps.

  Windows wireless and wired network connection problems 

  Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Hope this information helps.

• My laptop does not connect to the Internet wireless or Ethernet.

  Hi my laptop does not connect to Internet via Wi - Fi or Ethernet connection. He previously connected the two. The model is a portable HDX-18 1201 and runs the Windows Vista 64-bit operating system. I have had the laptop for a while now and this is the first time that this has happened. I tried to locate the network drivers but can't find them on the Device Manager. To my knowledge, I have not changed anything on the computer that may have caused this. If someone could help it would be greatly appreciated. Thanks Richard

  Hi Richard,

  Search for the latest drivers for your model laptop from the HP site and then try if operate you, install it, for the wireless and Ethernet cards

  just download the drivers from the HP website through another computer, copy it to MemoryStick and install the drivers on your laptop and see if it detects it fine, and then it should work Fine.

  Kind regards

  Amjad

• My laptop does not connect to the internet, even if the wi - fi connection is available

  OK, I have a netbook ASUS T-100 with windows 8.1. Yesterday, while I was downloading a game software, a notice came up saying "Windows Defender has blocked a program to run. I trusted the software so I went Windows Defender and allowed the program to run. But I discovered that the program could have the potential of harmful effects to other startup add-ons and programs download without my permission (even if during the installation of the software, I REFUSED any other unwanted programs being installed). So, I opened the Panel and uninstalled everything that has been downloaded.

  This is where everything started to go weird. I thought everything was fine until I tried to open Google Chrome on my desk.  He said something like 'cannot be opened because this application may have been moved or copied. Same for Internet Explorer. I went on the start screen and tried to open Chrome and IE, but there was no answer. Then I thought maybe restart the laptop would be useful. So I restarted. Worst decision ever. After the reboot, there is no Chrome or IE. They simply disappeared! I tried to look for them, but it did not help.

  I tried to download Chrome from the store, but it wouldn't connect to the internet (even if it was connected to my router). It showed an error «0x80072efd» I went Windows Network Diagnostics and tried to solve the problem, and something else end up - "the remote device or resource wont accept the connection". I looked on the internet and there are solutions saying to disable security. So I tried to turn off Windows Defender and firewall, but even once, that does not solve anything. One of the alternatives was to do a system restore, but I don't think that this is necessary, just?

  P.S. I have an iPod touch and a family laptop that connects perfectly with WI - FI. Thus, there cannot be a router issue...

  I DON'T KNOW WHAT DO YOU HEEEELLLP PLEASE! I have an assignment due next week and I need my netbook for IT... any help would be greatly appreciated...

  UPDATE1: I just noticed that the mail application still displays new messages, except the pictures of these mails are not displayed (they come with a cross). Does this help? #

  I FIXED IT! BY MYSELF

  so, for those of you who have a similar problem:

  what I did:

  1. realizes Change PC settings (from by clicking on settings of charms)

  2. click on network

  3. click Proxy

  4. off "use a proxy server".

  5 BOOM, internet s on the back.

  I have a question however, disabling proxy effect on my network connection? Like what is?

• Laptop does not connect to the wireless LAN

  My knees worked well with the wireless and then suddenly won't go to any website. Laptop is connected wireless but does not to any website... If I go to solve problems... Windows Firewall is mentioned. Can anyone help?

  You mentioned the windows firewall in your message...
  It is possible that the active windows firewall prevents you from connecting and loading website...

  Usually active firewall should not create problems and its not recommended to disable the firewall internal system but in your case, you can try to disable the firewall for testing purposes...

  To open Windows Firewall go to control panel - Windows Firewall.
  Enable or disable, and then click turn on the Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Then click on disable Windows Firewall in each network location that you want to stop trying to protect, and then click OK.

• Laptop does not connect to the internet once again.

  I had this problem in April and she is back again.

  I when I start the little icon in low shows only havea limitrd abd the only connection, at times I can connect through the Trouble shooter.

  When it happened before that I was told to do a full reinstall with the retrieval of records supplird .which I did and it was fine so far.

  I don't want to do a full install each word to say 3 months.

  By the way my wifes laptop and my dexktop connect without any problem at all.

  .

  I have a HP Pavillion G6, serial number is[personal information deleted] and I run Windows 8.

  Can anyone help please.

  Ken

  rlaikenn628,

  When you go into Device Manager, that you need to click the arrow beside network card and it will give you more options.

  Will wireless adapter or wireless or Wi - Fi somewhere in the description.

  Then right click and uninstall.

  Also, you try to go to HP.com and just update the wireless card.

  Here is a link to updates.

  I would like to know how everything goes.

• Compaq CQ58 computer 301SA laptop does not connect to 50Ghz band on router

  My laptop does not connect to the band 50Ghz on my router dual-band. I know that my router Netgear dual band diffuse 24 and 50 Ghz, but the laptop only shows the 24 Ghz band depending on availability.

  I have a Compaq CQ58 301SA Notebook PC, Windows 8 (64 bit OS).  It has a Ralink RT5390R 802 11bgn network adapter and a Realtek ethernet network adapter. I use the laptop wireless, for example using the Ralink connection and it connects easily to the 24 GHz band, but I want to broadcast TV programs and movies smoothly, for which, I understand that the 50Ghz band is preferable. I pay my ISP (Virgin Media) for a connection to Super-fast broadband but my laptop seems to be limited to the 24 GHz band. Seems to be the case if I work with the adapter Ralink wireless or wired with Realtek ethernet connection.

  This problem can be corrected? If so, how? What I have done research on the web, the problem seems to be network adapters. Can they work on the 50Ghz band? Or do I need to download another adapter (if so, which?) Or use an adapter external network I plug into a USB port?

  Driving me crazy...

  Hello:

  The Ralink RT5390R 802 11bgn is a map of the only band (2.4 GHz) only.

  Whenever you see a labeled bgn wireless card, it is a single band card.

  Cards labeled dual band abgn or agn.

  The maintenance manual (Chapter 3, page 19) does not indicate that any internal dual band card is supported, so you would probably have to go with an external usb dual wireless adapter.

  http://h10032.www1.HP.com/CTG/manual/c03593268.PDF

• Satellite L300 - does not connect to the grid

  my daughter ran in front of me yesterday and ripped the power cable from the plug, and now the laptop does not connect to the grid. Is there a how to on how to disassemble the laptop so I can try to reattech the plug to the motherboard?

  Thank you

  Hi the horse stable,

  In general there is no technical manual which can be downloaded. These user manuals are not for the public, and I saw manual user on the official website of Toshiba.

  Which means you have to disassemble the laptop yourself or ask a maintainer approved assistance. You can also get new spare parts from these guys there, and they can help you address all of the issues of material. :)

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.