Laptop does not start after spilled liquid

Similar Questions

• My laptop does not start after cleaning

  Hello
  I knew an overheating problem on my laptop.
  I therefore decided to remove a processor heat sink and empty dust. It was released with processor...
  There was a huge load of dust, so I cleaned it, put new thermal paste...

  Now computer laptop does not start loading Windows.
  It checks only the CD, HARD disk, and that's it.
  Screen is blank, ON the indicator led is on.
  Two fans periodically start to turn (when they stop radiator heat - so the processor works)

  Where is the problem?

  Thank you

  Hi Dubas,
  You can access the BIOS when you try to start your laptop? This can give you a clue as to why the OS will not charge.

  Kind regards

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Acer laptop does not start after the blue screen

  After I got a blue screen (flashed by too fast to see the error message) when I try to reboot my acer 5610Z laptop computer with vista home edition, usually nothing happens at all. sometimes windows is trying to run the Startup Repair tool, then crashes and only a cursor flashing at a black screen.  Tried to open the case and clean the Fan & Heatsink heat to air without effect.

  The blue screen came a few days after I started using a new USB mouse, but the fan seemed to get high a few days earlier.

  But I noticed it will make the road to startup repair only if the battery is in, and never if only the power cord is attached.  Also, if I let the computer sit for several days, it is more likely start (even though he never passed from the Startup Repair).

  1. try the system restore.

  2. try to do a startup repair disk.

  3 acer Recovery Options.

  4. contact Acer.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Acer.com/worldwide/support/index.htm

  Support &

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop does not start after Windows update

  I have HP laptop with Windows 8.1.

  It no longer starts after you install updates.

  It has happened before several times. I used system restore and it should correct the problem temporarily until the next time for the installation of updates.

  Now I can not even run system restore. He says that I have an administrator account.

  Help, please.

  The process I'll tell you will solve the problem, but it leaves a few effects. All the installed update will be uninstalled the version they had when you have installed 8.1 windows and programs in your programs (x 86) NO program file in the C: drive or the drive where windows is installed must be UNINSTALLED. The uninstalled programs will appear on your desktop as Applications.HTML removed. If you have any problem with the effects that I mentioned that process as follows:

  1. at start up press F11 to enter recovery.

  2. go on recovery to solve problems.

  3. then in troubleshooting, click on refresh your PC.

  4. wait it ends (it takes about an hour)

  5. your system is restored.

  Hope this helps

• Laptop does not start after upgrading CPU

  Hello

  I have a dv2528ea and I decided to upgrade the processor and the RAM. According to the manual of the T8300 is compatible, so I bought one on eBay (so-called new). When I powered the laptop, the bios screen appeared as usual, but nothing more happens. Among the options available in this screen only works the "ESC" (boot messages I think). I can't access the configuration. The CPU, RAM, HARD drive and DVD drive is correctly detected, the BIOS and video BIOS are "shaded" don't know what it means.

  I know that I didn't break something because after putting the T7100 back in place, the computer worked fine.

  So my question is: is the burned T8300? Do I have a bios problem?

  I've never updated my bios (since 2007) and the CPU is not physically damaged, but this last part can doesn't mean anything...

  Thanks in advance, Pedro.

  Hi, Pedro.

  I hope it will do the trick.  F.0Une is old and I think that's the reason why your processor does not work.

  The problem is that you are under Windows 7.

  You can put Vista on it and flash, or do you know how to make a flash out of the file based BACK?

  I don't know how.

  I'm saying that you are taking a considerable risk if you flash in Windows 7.

  Paul

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• HP Dv6 6 c 50: laptop does not start after interruption of the upgrade of windows 10

  I was upgrading my system Windows 10 free upgrade offered by Microsoft. After completing the download of the system has been installed. When close to 50% of the installation is complete the computer turns off because the battery has been cut. "When I connected on the power of the screen said" back to your previous version of windows. Then a message popped up that PC start up failed and u first "Startup Repair". I went for the option and a widow open saying: "Startup Repair is checking your system for problems... Attempt to repair ". This is the case for the last many hours and there is no progress. If I have to cancel it is said that Startup Repair cannot be cancelled. Please can someone tell me what I'll do. I created back to the top of one of my data.

  Thanks in advance

  Hi @Faiza1,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP Pavilion Notebook dv6-6c50se and the system failed on Windows 10 upgrade. Here is a link to perform a HP for Windows 7 system recovery. In this document, it shows you the screen I need immediate help, this section, use the Microsoft System Restore.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Please let me know how it goes.

  Thank you.

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K

• Laptop does not start after HP Support Assistant ran some update

  ENVY of HP dv7-7387er

  Yesterday my HP Support Assistant showed a message that there are a few critical updates. I confirmed to download and install it. After it was something like the BIOS update. And now my computer will not boot (black screen, no sound, only power led is on). I have to postpone my trip to fix. Can help you with something?

  I tried http://support.hp.com/us-en/document/c01443371 , but it did not help.

  Has been useful for me this: remove the battery, wait 1 hour, insert the battery, turn on the laptop and everything works ok. The key was - remove the battery for a long time.

• HP Envy k201na: my HP laptop does not start after restoration of factory settings removes the boot files

  I wanted to restore my computer laptop back to factory settings. So I went into settings and navigated to the update and recovery, recovery and then clicked the option restore factory settings. I had several partitions then asked me if I wanted to delete all of my drive or to remove all the windows disk was installed on. I clicked on the remove all option. Everything was erased from my laptop, I think that the boot partition has been altered to. Now when I start my laptop 0xc00000000f error code occurs and he said: 'you will need to use recovery tools. If you don't have any facility (such as a disc or USB device) support, contact your administrator for PC or PC/manufacturer. »

  

  An image of the system, that's what I used to fix my PC. I provided an image my PC with recovery media

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Re: Smoker L30-10 X PSL33E does not start after upgrading RAM

  Hello

  I have a problem with my laptop.
  It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).

  I bought two modules and my computer does not start after changing them.
  It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
  2 x 1024 - did not work
  1 x 1024 - did not work
  1 x 1024 + 1 x 512 - working but not properly.

  BIOS find that I only 896 MB (1024-128 for the video card)
  I said OK. Let's see what will show windows. He was also 896 MB.
  I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
  I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?

  I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
  Please someboy help me and tell what to do.

  PS. the Modules are new and work correctly.
  They have been tested.

  Hello

  Have you used two identical RAM modules?

  What kind of modules did you use?

  In my view, that the problem is related to the new, inserted modules.
  There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.

  According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.

  Did you use these modules?