Laptop hard drive error

Similar Questions

• 2000-2d19WM HP laptop hard drive error

  My HP 2000 is currently saying that a SMART disk check has detected an imminent failure.

  When running hardware diagnostics gave me a failure ID of: 6CX1VS-70P7AE-MFGJWK-60BA03

  My product ID is: E0M17UA #ABA

  I wonder what my options are. My PC is still under warranty and I would have preferred not to lose the data I have on that hard drive.

  Thank you.

  Hi @RSBlack ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your laptop HP 2000-2d19WM and the error message.

  Product E0M17UA number
  Status of the warranty covered under the end of warranty date 2015-01-22 (YYYY-MM-DD)

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• Laptop HP 2000: hard drive error

  Hello
  I have upgraded to Windows 10 one a few days ago and then yesterday when I went to turn on my computer it says this.

  Hard drive error
  Please run the hard drive Test in the diagnostic system
  Hard disk 3 (3F1)

  I ran the test drive and that's what he said

  Smart check: PAST
  DST short: FAILURE

  Help, please!

  You will need to replace the hard drive. Update to Windows 10 had nothing to do with it. After the back if you want to help find a car and its installation and reinstallation of Windows. If your Windows 10 appeared as it is activated, you can do a clean reinstall of Windows 10.

• Start up and boot problem. Hard drive error. HP pavilion laptop Home Premium. Windows Vista preinstalled. No cd came with it.

  Nothing new added to comp. Got the hard drive error message and followed the instructions to fix/repair. All translations tried (almost every test suggested/memory/hard drive, etc.) could find NO problem with the memory or hard drive.  Once I have pass the problem to boot/start the computer works fine!   Crazy!  Any sugg. would be appreciated.

  Hello

  ·        Since when are you facing this problem?

  ·        What are the fix and repair that you tried to solve this problem?

  ·        Outside this disk verification error, do you get any other error message?

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  ·        Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  ·        Click on continue or provide administrator credentials if prompted.

  ·        In the command prompt window, type the following text, and then press ENTER:

  ·        sfc/scannow

  ·        You should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  ·        % Of verification complete.

  ·        Once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

   

  Method 2:

  I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.

  a. click on start, then run.

  b. in open, type cmd, and then press ENTER.

  c. use one of the following procedures:

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  You can see the article mentioned below for assistance.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3:

  I suggest you to do a system restore. Follow the steps mentioned in the article below.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• hard drive error message 1

  Whenever I turn on my laptop, a message appears that there is a problem with my hard drive.  I have prees F2 to get the Diagnostics utility and run the hard drive test. When I do I get this message

  hard drive error

  Failure ID: 90 c 633-6am70r-mfgk0k - 60 c 203

  Product ID: c2n26ua #aba

  Hello

  Error code 24 characters will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Satellite L350 - persistent master hard drive errors

  I've known persistent main hard disk errors. Errors, in their first incarnation, were windows freeze at loading screens and screensavers, and then developed by stopping Windows to boot at all. It certainly would not start normally and sometimes would not start in safe mode. I used the recovery partition to restore the computer to its factory settings. A day or two later, the same symptoms began to manifest again, although not as severely. The hard drive errors, freeze on screens and loading screen savers.

  My question is: if I re - format the hard drive master, thus destroying the recovery partition, I could then just restore windows from a newly formed recovery CD? And, in addition, what is the probability that reformatting the drive hard completely would have an effect on the frequency of errors?
  If the hard drive is simply borked, format or not? And if yes, what is the next step?
  Could I restore windows on my drive hard slave and give up on the master?

  Thanks in advance.
  Mike

  Hey Buddy,

  Are you sure that all these problems related to the HARD drive at 100%? How did you check that?

  I don t mean it s not the HARD drive, theoretically, you could be right but before you think to change the HARD drive please use a diagnostic tool special for HDD as Drive Fitness Test:
  http://www.HitachiGST.com/support/downloads/#DFT

  This tool can check your HARD drive for bad sectors.

  If the HARD features of bad sectors disk, formatting will not help you because the sectors are physically damaged. With other words, the only chance is to exchange it.

  But if you have already used the recovery feature of HARD Toshiba drive to reinstall Windows you can say s that no problem of software and it must be hardware related. ;)

• Hard drive error, does not start.

  Computer does not start. I get this failure code:
  Rw1xtw-7ax87b-mfpv6k-619403
  
  Can't find any information on this subject, can someone shed some light on this subject for me?

  Hello

  It decodes for hard drive error 305 or the hard drive has failed, you will need to get the replaced hard drive and reinstall the OS and have a Fresh start, note that all your data is saved on the hard drive will be lost.

• Replacing laptop hard drive

  I have a HP Pavilion dv4-2049us laptop, I need to replace the hard drive. The hard drive is a 250 MB drive.  However, I found a replacement on EBay. The drive hard ebay is a 320 MB hard drive. Can I use this 320 MB hard drive in my laptop that originally had a 250 MB hard drive? It (the 320 MB hard drive) will affect the performance of my computer? As do faster or slower? Or is that what you call "modernization"?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. I see you want to learn more about the laptop hard drive replacement. Let me help you with the issue.

  I suggest that post you this question in the HP support forums here: http://h30434.www3.hp.com/psg/

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• Laptop Hard Drive 3.5 SATA hard disk (please fast response)

  I have a major problem. There is a HP Compaq DC7600 SFF on Ebay that ive been watching for a while. I have DDR2 RAM for her and a 60 GB laptop hard drive. Im going to be to put Windows Xp on the computer. The problem is to a SATA 3.5 hard drive. Is there an adapter for it? I'll need to get a new drive?

  Here is the link: http://www.ebay.com/itm/HP-DC7600-SFF-Pentium-4-HT-2-8Ghz-512Mb-No-HD-/271103764174?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D3652700529279890050%26pid%3D100011%26prg%3D1005%26rk%3D1%26sd%3D280958745061%26
  Help, please

  Hi Ryan,

  Thanks for posting in the Microsoft Community.

  I suggest using your favorite search engine and look for adapter that will allow you to do. You can also contact the manufacturer and check the availability of these adapters.

  Hope this information is helpful and let us know if you need help with Windows. We will be happy to help you.

• I switch my laptop hard drive from FAT32 to NTFS via a command prompt and now cannot read the disc.

  convert my portable hard drive from FAT32 to NTFS by using the command line.
  After conversion, my pc can not read my laptop hard drive, I check the computer, my protable hd management 1175 GB, my drive only of 500 GB hard probatle, be how to 1175bg? can someone help me? now I can't play my disc hard protable.

  http://img217.imageshack.us/img217/4338/002ilq.jpg

  Check this box:

  http://www.tech-FAQ.com/how-to-convert-FAT32-to-NTFS.html

• Unable to transfer data from the laptop hard drive external/pendrive.

  Dear Experts,

  Unable to transfer data from the laptop hard drive external/pendrive.

  Each time that tried to transfer meesage seems to the authorization of the administration.

  Kindly help me to solve the problem.

  Concerning

  Hello

  Follow these steps and check:

  To take ownership of a folder

  a. click on the USB key you want to learnand then click on Properties.

  b. click on the Security tab, click Advanced and then click on the tab owner.

  c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click on the name of the person you want to give to the property.

  e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

  f. click on OK.

• Hard drive error, but passes diagnostic

  I have a vostro 320 all in one computer. Yesterday he left initializing with a hard drive error, but when I run the hardware diagnostics all past. When I go into the installer the Bious does not see the hard drive. Current Bious is 1.2.0 and current is 1.4.0.

  If the BIOS does not see the hard drive, no - you will need to replace the disk.

  You can take a chance on the resettlement of the player (unplug the system and disconnect and reconnect the hard drive), but if so, it is not detected by the system, it is toast and needs to be replaced.

• Laptop hard drive failures

  My laptop hard drive crashed. It is repaired by a new disc with the approved o/s. It doesn't have a D partition now. Is there any use in my command, recovery disks? I already started to restore applications and data.

  Hello

  I see what you mean

  If media recovery is all benefits for you, depends in large part of the operating system that you use and whether you have any other way to reinstall the operating system in case of accident - for example if you are using Windows 7, you can easily create your own installation media and use the key of 25 characters of your coa label to activate it. A complete list of Windows 7 ISO files here.

  If you are under Windows 8, these files are not so easy to find, so you spend your recovery media order may be worth considering.

  In both cases, the only way that partition D (recovery) can be recreated would be to use a set of recovery media (disk or flash drive) to perform a factory reset as it will not only reinstall the OS, but to recreate the original scores, with only your laptop delivered.

  DP - K

• Product key Windows 8 Pro does not not after change of laptop hard drive

  Hello! I have a Dell Inspiron computer 15R laptop with Windows 7 Home Basic Edition pre-installed. I bought Windows 8 Pro Windows upgrade plan offer. The product key I got worked before my laptop hard drive crashed and changed by Dell. How can I solve this problem?

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Dell Hard Drive Diagnostics fix hard drive errors

  My computer would stop working and say that I had a software problem.

  When restarting it would run for about 15 minutes and the cessation of work and

  show the same error.

  I have run the Dell diagnostic program and it showed that I have several

  Hard drive errors.

  After the diagnosis my computer now works fine.

  The diagnostic programs to correct the mistakes of hard dirve when he finds them.

  My computer is a Dimension 4700 running windows XP Professional

  Service Pack 3