destroyed the rear part

Similar Questions

• I made a gif from 180 frame of animation in photoshop.  But when I tried to reverse the trend, the rear part of the animation flickers.

  I was using the timeline in photoshop. I have selected all of the 160 frames, pasted after 180, and 181 from selected and used image invert. However even if the animation plays fine when I play forward (after the export of the fig), when it should be the reverse part it sparkles.  What am I doing wrong please?

  Riesa

  Hello

  Greetings!
  What version of Photoshop?

  What is the operating system?

  What are the specifications of the system?

  Can you try another small gif of crating and reverse that, see if that flickers.

  Concerning

  Jitendra

• Hearing CC destroyed a large part of my audio files on the crash

  Hearing CC 2015.2.1 just crashed on me - no problem you would think - BUT it has destroyed a large part of my audio files (missing Clicks random and audio) on the crash.

  Bad things first: even if I saved in iterations - it is not repairable - because he destroyed the ORIGINAL audio files that refer to all saved iterations - so no luck.

  Good thing is that I have copies of backup of the shoot raw files. S ' got away with a little fright and a LOT of work to redo.

  I will not use hearing again. My work is too valuable. From scratch in another audio program, because I need reliability in a professional workflow.

  Sorry to hear that you have given up the hearing.  I can assure you that this isn't normal behavior and that the hearing is used professionally in thousands of companies - radio, audio for video post-production stations, even on the odd Hollywood feature.

  Of what you say, I doubt that you are interested in making this kind of post-mortem, but if you wanted we would be happy to try to work on what went wrong.  We would need to know the details of your computer, what version of hearing you used and a description of the work flow using... i. e whether in multitrack or wave form view, what effects/changes that you have made and exactly how you saved 'iterations '.

  Also, try never hearing again, this FAQ hearing crashed.  Now what?  gives some details on how to proceed.

  Finally, I'll just mention that the hearing has an automatic backup center - you can set it to backup all of your project at some specified time interval - and you can also tell him to back up to another hard drive or even to the cloud.  It certainly got me out of trouble once when a bolt of lightning nearby fried my drive hard mid session!

• When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have spend on them... Same video works fine on Chrome?

  When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have to go over it. I use Wuindows 7. The video will restart when I pass this pointer/mouse.
  The same video (s) works correctly when you use Chrome?

  This issue may be caused by malicious software.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• Is my Xperia Z2 always watertight if the rear panel is cracked?

  Hi there, I was just curious to know if my Xperia Z2 is completely impervious to water as the rear panel has many long cracks on it. The Panel is still intact outside a few shallow chips and I would have thought that there are other layers below the surface to protect the internal parts of the phone, but I just want to be sure that I know if I must now be careful around water with the appliance or not.

  There is that one way to find out, contact your local care Xperia and request a trial of vacuum.

  http://support.sonymobile.com/global-en/contactus/

  In my opinion, is more impervious to water, there is no risk of

• Destroy the NavigationPane Page when used of a Peek

  Hello
  It is possible to destroy a page when the rear sweeping gesture (peek) is used to jump to the page of the NavigationPane? I don't want to use the property ' peekEnabled: false "I like the gesture of glance. I can't use the signal to onPopTransitionEnded I don't know the id of the page that will be skipped (using ComponentDefinition).
  The following is a snippet of the code:

  QML File 1:
  NavigationPane {
          id: navPane
      CustomControlPage{
  
          }
  }
  
  CustomControlPage.qml
  Page{
  ...
  
    onTriggered:{
  // I need to create a new Object everytime and that is causing the  problem when peek gesture is used rather than back button as with backButton, I can just use paneProperties and then do pageID.destroy();
  
      var newPage = newCustomPage.createObject();
      newPage.variant1 = "hello,";
      newPage.variant2 = "world!"
      navPane.push(newPage);
    }
    attachedObjects:[
     ComponentDefinition{
      id: newCustomPage
      source: "newCustomPage.qml"
     }
    ]
  }
  
  newCustomPage.qml
  Page {
   id: newPage
   property variant variant1
   property variant variant2
  ...
  
  paneProperties: NavigationPaneProperties{
    ActionItem{
     title: "Back"
     onTriggered {
        newePage.destroy();
     }
   }
  }
  }
  

  Thank you!

  Yes, that's correct. 'page' is a parameter, it points to the page that you need to destroy.

  popTransitionEnded is called when the page is closed using a "back" button or closed using the gesture of glance.

  It cannot be called if you delete the page programmatically, I'm not sure about this.

• Can I refine the rear edge?

  I understand that most people really like the new tool "select and mask", but it works well for my needs. The tool "refine edge" was infinitely better for my workflow.  Is it possible to get the edge tool I refine my selection in PS 2015.5? Y at - it a plug-in that will bring it back, or a file I can manually put in the folder Application Support (OSX 10.11.6) which will give me access again?

  I think the answer to your question is not you can't refine rear edge starting in CC2015.5, but you can always do, is have parallel installations of Photoshop on the same computer. Take a look at the link below to see how it's done. The relevant part is towards the end marked as 'Install previous versions of the applications' you would choose CC2015.1.2 or an earlier version, like they Refine edge.

  Download and install Adobe Creative Cloud apps

  I know have to jump between versions of the application is not very convenient, but it is probably your best option

  You have successfully updated to CC2015.5.1 that appeared this week. There has been changes to the Select and mask that are meant to make it easier to use.

• Kiss the whistle - part 2

  http://forums.Adobe.com/thread/860180?TSTART=0

  Based on the above thread... a little more help needed please.

  O K.  did the concert and recorded (filmed) a grand piano in a solo situation with a pianist.

  Amazing, amazing, amazing experience for me... pianist was awesome and it turned out that we had a... made by hand Steinway Grand Concert for the performance.

  My audio amateurism did introduce a certain degree of "whistling" in the record... .Although I have to say... I really nailed the feel of the Steinway (confirmed by the owner of the Steinway and a Professor of music (Piano) University.-the two who were there and who I listen to headphones as I implemented the show).

  I've reached a certain beautiful reallly stereo separation and audio dynamics is so real and satisfying. MY HUMBLE OPINION

  Important was... the performer. emotionally and visually really has complete event

  Now... I want to 'kiss the hiss': bye!  (How?)  The hiss is there, and I maybe only (not the client) will know.

  Next...

  I would like to raise a little volume of a requirement of the DVD release.

  I have everything dynamically safely with a peak around-12dB in my edition (first Pro CS5.5)...  This means that I have to find my just a little follow-up.

  What is suggestions for a little more courage on the sound of a DVD?  I think I must add 6dB.

  Oh well, back to the level is the easy bit - that's what standardization is for. Highllight the entire file, select Effects > Amplitude and Compression. Set the scale in dB, and then drag the level back to about - 0.5 or - 1dB (you'll hardly hear the difference between these, but do not go to 0 dB if it is a kind of disk you write - sometimes they get mad!). Apply it, and will then reset your file so that the highest point reaches the value that you set. Don't try to do it with the on-screen gain control, because on a file more you won't see the pics properly, so you won't know how to adjust. The normalize function, however, this very precisely made.

  As for getting rid of the SSIH - well, it depends on how much there is to know to what extent you can get with this without ruining the sound of the piano. What you need to do is go to Effects > noise reduction and select the one upstairs, one focused on the process. What don't try you that with another adaptation, or attempt to use the noise reduction - they work as well, especially the Adaptive NR - that could ruin a piano even sound without trying it, I think.

  Open the advanced control. Initially, you need to set the size of the FFT to 16384 - in other words, the highest there is, since it's a hissing sound you are trying to reduce. This setting, you must then perform a single hissing selection in your file and the capture as a profile of noise (SHIFT + P). If you try to do this before the FFT, he'll do again, so beware!

  Then, it becomes more difficult. You must select a part of the file which got preferably, whistle, piano and whistle and then just a hissing sound, all in a small section. Don't worry too much on the blue line on the screen at this point, or doing whatever it is, you see, but you can trust your ears and do an overview. My guess as a starting point for the slider settings very important is that you need the noise reduction a rule somewhere between 80 and 90 percent and reduce by one set to not more than 10 dB above. Also in the advanced Panel, established somewhere control of the spectral decomposition near or less than 10%, otherwise you will get the modulation effects more that you will like.

  What you listen to, mainly, is what is happening during the disintegration of piano sound, where hiss level comes back to, and what objects you can hear (if bad it looks like bubbles under water). What you absolutely don't want to do is get rid of all the noise - this would make artificial sound, and no one will want to listen to it for a long time. It will also destroy the downgrading of piano. What you photograph almost certainly, is that a reduction of somewhere between 6 to 10 dB - beyond that is where the problem is inevitable. You don't need sounds of piano strong to set parameters, but quiet ones - the NR will not significantly affect something of higher level anyway. One thing you definitely want to avoid is any form of modulation hiss - what is more annoying whistling itself - it's where the parameter of spectral decomposition becomes important, and keep low - certainly not to the it by default of 65%! It is only when you remove too much hiss you get sensitive objects - and to avoid this, you need to monitor high enough to hear.

  Unfortunately, all the records are different from this POV - it's one that you absolutely have to play it by ear. If you can post a few seconds of noise and quiet piano however, it would be much easier to get you in the ball park.

• unexpected text displayed in the lower part of the browser

  Hello.
  A message began to be displayed in the lower part of the browser, please see the attachment.
  With the help of 45.0a1 (2015-11-25) Nightly 32-bit version.
  Config, I added a photo with the corresponding entries of xul.
  How can I get rid of this message?

  Thank you

  their new version 2.6.13 solves this problem apparently: https://addons.mozilla.org/firefox/addon/adblock-plus/

• There are all sorts of symbols in the upper part of the screen on different things. (Delete, answer, answer all etc)

  Thunderbird didn't work at all the other day and I had to keep going in the Task Manager to shut it down, but then he began to work the next day and it works. However, there are all these symbols covering in the upper part of the screen.

  It seems that you have a mixture of two different languages.

  Close Thunderbird.

  Back up your profile folder.

  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  Uninstall Thunderbird:
  Via 'Control Panel' or 'Settings' > 'programs and features '.
  Select Mozilla Thunderbird and click 'uninstall '.
  uninstall all instances of Mozilla Thunderbird.

  Download the language appropriate for your operating system from the link below and install it.

  • https://www.Mozilla.org/en-us/Thunderbird/all/

  Report on the results.

• When I try to send an email to multiple recipients, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. This is not

  I bought a new computer. When I try to send an e-mail to multiple recipients, now, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. It is not yet supported. If please change this address and try again. "I don't know what are the non-ASCII characters, so I don't know what to do. I never had this problem on my old computer. Please explain in simple language.

  The 'local' part in the context of email addresses, the part to the left of the symbol @. The warning is a bit of a surprise, because in general the owner of a mail server is relatively free to specify the address format. There is a movement to allow the games to other characters to be used in the fields, so I'm a little disappointed to see that, apparently, e-mail does not support the latter in the local part yet or it can be your SMTP server that generates this message.

  ASCII characters ("American Standard Code for Information Interchange") are, on the whole, the English alphabet, uppercase and lowercase, as well as figures, common punctuation and case of things like the asterisks, obliques and media bars, but not of accented characters. But even apparently simple things like spaces and dashes have cousins who, at first glance, appear to be identical, but are not represented in the ASCII system. I am thinking especially nonbreaking spaces, dash and half-quadratin.

  But I don't know why your new computer must have caused these warnings.

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• Why? on EACH web search I get a message saying "Firefox prevented this website." These are sites of trust for the most part

  I rebooted the free version of the Firefox browser, about two months ago. Since then, whenever I navigate, with few exceptions, Firefox displays a message bar at the top of the screen saying "Firefox prevented this site" with the message, there is a checkbox asking ' ALLOW? When I check ALLOW it most of the time, I get a web page, BUT on some occasions, Firefox keeps just block the page.
  Sites and pages that I refer here are for the most part, places of TRUST.
  This happened since I rebooted. It was NOT a problem before that.
  It is VERY annoying and I have since passed to Google Chrome.
  If you can offer any reasoning or explain why this is happening, I will be grateful.
  Thank you. mLowe51

  Finally looks like a response to the blocking of the Government and other trusted sites

• The lower part of the 1/4 of the entire screen has recently changed a black and beige bar. How can I fix it?

  I tried to change to full screen, I tried to restart, but it did not work. I lose 1 to one-quarter of the lower part of my display area. This is not the case in other browsers I have. How can I fix it? I did not use addons or changed anything
  Linda

  You are welcome

  Can you tell us what extension or theme caused this problem?

• Cannot access the lower part of the option "file save as" in word

  If I choose the option "file save as" in the word, the bottom of the box is below the bottom of my screen and inaccessible. I tried to resize my screen and other options without result. Does anyone have any suggestions on how to fix this on a macbook pro?

  You must slide the lower part of the document itself upwards until the document is small enough so that the bottom, it is visible in the screen...