Laptop speakers does not sound, not work HP Pavilion dv4 1220 U.S.

Similar Questions

• my laptop speakers do not work but my headphone works very well

  I have a laptop HP Pavilion 1d73us g6, and although my headset works fine the speakers are not. He is a recent problem.  I tried troubleshooting with the windows with no result troubleshooting tool. I checked all the audio drivers and they check fine. I tried the driver software without success. Windows Media Player does not work. I get an error message when I try to use it. What else can I try?   Carl

  Hello @hifive11,

  I read your post on how your laptop speakers do not work, but the headphones work fine, and I'd be happy to help you in this case!

  The first step that I recommend is to follow this document on the no sound on speakers (Windows 7). This should help to restore the sound from your speakers.

  You can also activate the speakers on your computer as default playback device. This is possible by following the steps below:

  1. click on the Start button

  2. click on Control Panel

  3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its

  4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which will be the helmet of your laptop device). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices

  5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate

  6. test your speakers

  If the problem persists, I recommend to you your laptop a previous restore point before the speakers stopped working. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• the volume on my laptop lenovo does not work

  the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!

  Hello

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the steps and see if it helps.

  (a) right click on the Volume icon in the Notification area.

  b) click on tab reading.

  (c) right click on the box empty.

  d) select Show disabled devices.

  e) right click speakers and select allow.

  f) right click on speakers and go to the Properties.

  g) select use this device from the use of the device.

  h) click apply and OK.

  Method 2

  If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• My internal Laptop speakers do not work.

  My internal Laptop speakers do not work.

  I have not recently downloaded or updated anything.  If I plug in headphones they work, but as soon as I unplug them, I have no sound.
  I'm not on mute, it shows that his fate, but it is not.
  Please help me.

  My internal Laptop speakers do not work.

  I have not recently downloaded or updated anything.  If I plug in headphones they work, but as soon as I unplug them, I have no sound.

  I'm not on mute, it shows that his fate, but it is not.

  Please help me.

  You must make the speakers as the default device.

  Right click on the speaker icon in the taskbar. Select the playback device. Under the playback tab, select speakers as the default device.

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• Satellite C650-16U speakers does not work after battery ran down

  Hello

  My wife and I was watching a DVD on the computer and did not know that decision was not lit, and therefore the computer off. When we restarted it after that food was missing the sound no longer works, and I have been unable to restart. I have restarted the computer, checked all very silent buttons etc, and I have uninstalled/reinstalled the driver. When I tried using the helmet on the laptop, the sound is fine, but it does not work in normal contexts, when nothing is plugged.

  I hope someone can help!

  Thank you

  Hello

  In addition to checking the reading in Control Panel-> sound tab, you must remove the battery and unplug the AC adapter when the laptop is OFF.
  Hold down the power button / 30 sec long and then put the two parties.

• Satellite A500-1FQ-harman/kardon speakers does not work

  The left speaker does not work. When I watch a movie for example it works for awhile but then it works for a few seconds and stops or it stops working completely.

  However, when I plug my headphones all right.
  Is that what I can do myself to fix the problem or do I directly send my laptop directly to the warranty?

  I recommend you to check the functionality of speakers using preinstalled Toshiba PC diagnostic tool.

  If one of the speakers is still cut off and doesn t work I assume that there is hardware problem and should be fixed by the authorized service provider.
  Warranty is still valid?

• My speakers does not work when I talk on the phone but when I have my headphones or have the phone up to my ear people hear me perfectly fine, please help.

  My iphone does not work on audio speaker and everything is perfectly fine, but when I'm on the phone and put my phone on speaker, no one can hear me not at all, but when I have the phone to my ear, or have headphones in people can hear me very well. I don't think it's a software problem, that my phone is updated with ios 9.3.5. Can someone help me please on this issue.

  Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again. You won't lose data.

  Have you tried plugging the headphones into an output a few times?

  Does say "headphones" when you toggle the volume and no headphones attached?

  More tips here:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

• My helmet is bright red, and the speakers does not work, when I try to adjust the volume when there is no headset/speakers in, there is a sign of the cross as the symbol of the volume where the places are supposed to be, macbook pro retina display

  My helmet is for some time, as the eye of the terminator, glowing and speakers have not worked since. I need to plug headphones or external speakers. Whenever I try to adjust the volume when it shows just a cross symbol under the sign of the volume, where small squares usually are (see below)

  

  Is there a way to fix this? Some other similar forums tell me to try to manually move a switch in the audio jack, but I can't seem to find such a change and the thing that seems most like a light switch, does not move.

  Can someone please help?

  Thank you

  Your audio output is stuck in optical mode, this is the red light.

  The solution is to try to insert and remove the plug a dozen times or more in the hopes of convincing making fall out of optical mode and in electric mode.

• HP 15 laptop: wifi does not work windows 8.1

  I have Windows installed pro 8.1. I was using wifi on this laptop, it worked fine. However, recently, I see that the Wifi does not work although he shows me the SSID of my network I used to use and also the SSID of the networks of neighbors. (It means that the wifi on laptop chip is capable of scanning the wifi signals and so it works). The same router from which all other Mobile tablets, my home laptop work are able to connect to the wifi network. Only on this laptop I am facing this problem. What may be a solution or what I should try. I tried the steps listed here http://www.fixedbyvonnie.com/2013/10/how-to-fix-limited-or-no-connectivity-wi-fi-issues-in-windows-8...

  Although I have not changed the default settings only steps above on blog, I tried to solve the problem. However, it did not work. Also keys function + F12 on laptop has no effect. The light on the F12 key is always on. However, it is possible to toggle the wifi in the bar of Windows 8.1 charms.

  What should I check?

  I bought an external USB wifi device that solved the problem.  The card wifi on laptop works well, but for some unknown reason, he is not able to connect to home wifi router. http://www.snapdeal.com/product/leoxsys-150-Mbps-Nano-WiFi/1179610?utm_source=earth_feed&utm_campaign=TopPerformersPLAScaling3000&utm_medium=CPC&utm_content=1179610&utm_term=, & campaignid = 350311165 & 28373951005 = adgroupid & adposition = 1o1 & network = g & device = c & targetid = pla-55251503741

• Re: HP laptop touchpad does not work after uninstall of kaspersky anti-virus (version of windows 7 32)

  Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?

  Hello

  Try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with Networking" and press ENTER.  When it has loaded, download driver Synaptics following, and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe

  Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.

  When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.

  Kind regards

  DP - K

• HP windows vista laptop webcam does not work properly please help?

  HP pavilion dv6707us webcam does not work and its not detected in everything that I use it in please someone help me ive been looking around and it was working fine until I did the updates of windows please, it's a hp laptop windows vista 64 bit?

  Hi JohnnBoyyy,

  1. you receive messages or error codes?

  Given that the problem started after installing the windows updates, you can check the updates of windows for optional updates for the webcam.

  For more information, see the article:

  Install Windows updates

  You can also check the HP website and try to update the latest version of the drivers for the webcam and check.

  Software downloads & Driver - HP Pavilion dv6707us laptop

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Vista laptop - programs does not work

  So, I was recently lucky enough to meet your typical Vista Security 2011 virus on my Dell laptop.  We met in the past I would be redemarrer to restart in safe mode, run the malware and generally she finds and remove it.  Well, this time I do the same thing as in the past, he finds it, but currently no program will run in normal mode.  I can get into safe mode, start the .exe files and others, but not in normal mode.  I combed the advice and tried several options that include:

  * Various /scans, Malware, AVG, etc.
  * Regedit, replacement of the exe, exefile, ' 1%"...and so on.
  * Find a vista_fix.exe file and I tried to use it last night, he merged, said to reset the computer, but nothing has changed
  * Microsoft Fixit (only runs in normal mode, but does not work... can not run it, he never completed create a control point)

  I can see pretty good most of these responses when searching on different boards, but none of them does not seem to work.  Just to get into the detail here, I don't receive any message when I try to run a program, nothing happens and it crashes windows Explorer.  Also, if I'm in normal mode and try to run something like cmd, regedit, msconfig, it crashes the window start and I can't use it anymore.

  I tried to go to the restore points, but nothing doesn't count, as does nothing when I try to run a file.  Oh and the internet works, so I can use it.  I also usually able to use malware, but he found nothing more.  I really am out of town on a laptop now, so I can't play with it atm, but I would love any assistance people can provide to combat this virus.  I'll get an external hard drive to back up all our photos, music, files once I get back and will just wipe soon if nothing works.

  Thanks in advance.

  Date of arrival:

  Remove Vista Antimalware 2011 and Win 7 Antispyware 2011 rogue changing name (uninstall Guide)
  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  Remove Vista Security 2011. Description and removal instructions
  http://www.2-spyware.com/remove-Vista-security-2011.html

  My best advice would be to format and clean install of Windows Vista.

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.