Laptop starts only in Mode safe

Similar Questions

• Computer starts only in Mode safe after automatic updates.

  Over the weekend, that some automatic updates ran on my XP computer and now my computer won't start mode without failure.  I've done several restorations, and it still does not start correctly.  Any suggestions?  I use AVG Free antivirus.

  Don't know if that makes a difference, but I looked back and in 2003, we bought the computer...

  It makes a big difference ! At the #1 stage, you want to download a different removal tool using this link instead-online ftp://ftp.symantec.com/misc/consumer/Rnav2003.exe

  All the other steps remain the same.

  You may be able to connect after restarting in Safe Mode with networking by my previous answer - but be VERY CAREFUL and connect just long enough to do what you need to do.

  If my fix works, you should be able to connect to normal (Windows) to the time where you get to step 4. If not, well..., we'll cross that bridge if and when we come to it.

• Computer starts only in Mode safe

  Hello. My question is this... I turned on my computer the other day and I got the "Starting Windows" screen, but then it just went to a black screen. Tried again, same result, same let it run for 30 minutes, but nothing else happened. Reset, press F8, tried in Safe Mode, it's my office. I also get secure with Networking mode. Tried the option repair. Windows could not automatically solve the problem. Unfortunately the system restore has been disabled so there is no restore point to reset to. What can I do so that he can start normally? Thanks in advance.

  Hello

  When the built-in repair software option does not work:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• How to start Firefox in Mode safe on Windows 8 directly from the Start Menu without switching to normal startup?

  Y at - it an option to start the firefox safe without having to open the firefox I have normal mode

  In Windows 7, there is an option to start Firefox in Mode safe in the Mozilla Firefox Menu

  You can start Firefox in Mode safe in two ways

  1. Hold the SHIFT key while double clicking on the Firefox icon in your desktop
  2. Press Windows key + R (open the command run) and type firefox-safe-mode

• Firefox 5 displays the right fonts only in Mode safe!

  After upgrading to Firefox 5, I noticed it displays the wrong fonts (larger than they should - they look ok in Firefox 4.x, Chrome, Opera).

  The strange thing is that if I run Firefox 5 Mode without failure, it displays it correctly. I have disabled all addons, I cleaned all Cache, configuration of the size of minimum font... even reinstalled. It is allowed only in Mode safe looking.

  What else to do?

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  Try to turn some of the prefs Boolean gfx.font_rendering on the topic: configuration page to disable some features.
  
  Filter: gfx

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• Windows Vista premium edition starts only with the safe mode or safe mode with network.

  There was a low voltage or surge protector and the computer came out. System Restore does not work.

  Hi ValrieSingh

   

  1. have you tried to start in normal mode after the issuance of the power?

  2. what happens if you start in normal mode?
  3. do you get errors in normal mode?

   

  You can check results when you activate the mode low resolution. It starts Windows using your current video driver, frequency settings low resolution and refresh. You can use this mode to reset your display settings.

  See also the links below for help on the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  I hope this helps.

• Vista can only boot mode safe after updating Panda Internet Security installed on the system

  Original title: VISTA can only successfully starts in Mode safe. When you try the System Restore restarts in Normal Mode and restore failed "Volume Shadow Copy Service used by the system restore does not work"

  Problem started (I think) after that PANDA INTERNET SECURITY did a update and says a restart is required (29/09/2010). System could not restart normally. Started, but virtually nothing loaded and couldn't do anything.

  In Safe Mode, first mistake was a Protection Exception for TPSrv.exe (a PANDA executable)

  Tried to do a Safe Mode system restore to point before PANDA update (28/09/2010). System Restore starts safe mode and then restart in Normal Mode.  After about an hour comes up with error message "Volume Shadow Copy Service used by the system restore does not work. (0 x 81000202) event log.

  I also tried sfc.exe but found no compromise windows

  Hello

  Follow the steps mentioned below.

   

  Method 1:

  Check if the Volume Shadow Copy service is started. Follow the steps mentioned below.

  a. click the Start button and in the search box, type in: Services.

  b. press "Enter" to open the Services window.

  c. find related services that are listed above and check the status (on the road) and the Startup Type (automatic).

  d. double-click the service to change the status of started and set the startup type to automatic.

  Try to do a system restore and check.

  Method 2:

  Since you are able to boot into safe mode, I suggest you perform a clean boot and disable all non-Microsoft applications, then boot normally and control.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 3:

  If you think it's a Panda Security software that causes this problem then, I suggest to uninstall Panda security of the system and check if you're able to boot normally.

  http://www.pandasecurity.com/homeusers/support/card?ID=23010&IdIdioma=2

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• 3.6.28 Firefox crashes after every start in normal mode, safe mode and Profile Manager too. *.Sqlite with sqlite shell file cleanup has not helped. WinXP

  Firefox does not work in any mode, I can see that the Mozilla Crash Reporter window.
  These crash-report nas was made:
  https://crash-stats.Mozilla.com/report/index/93e1c441-8294-4173-843a-2e71a2121217
  I don't want to upgrade to version of Firefox, so what can I do to continue using 3.6.28 version?

  This isn't a useful battery in this accident report.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

• keyboard recognized only in Mode safe

  I am running XP SP3... .n a HP desktop computer

  A normal start, or a PS/2 or USB keyboard is recognized.  However, both are recognized in Mode safe. .

  I have a Logitek LX7 mouse that is working very well in Normal Mode as well. but no keyboard.  I ran THREE different cleaners on the system, the malware dectives, etc. etc.    I have uninstall/re-installed keyboard drivers then in Safe Mode and do not know what else to do?

  When in normal mode, the mouse works fine, but I can't do what-so-ever typing.

  It happened once before about two weeks ago.  But after a few days the re-boot it is normal again.

  I know that it is probably little corrupted code somewhere, but you can't FORCE the normal system to recognize material?:  I tried everything I know.

  I looked through the event viewer reports and you seem to have a staggering number of questions. It would be useful to know if you have Windows XP Home Edition or professional? Also do you have installed SP3?

  Type: error
  Date: 20/06/2011
  Time: 11:10:19
  Event: 1008
  Source: MsiInstaller
  Description:
  The installation of c:\WINDOWS\Installer\92b0f.msi is not allowed due to an error in software restriction policy processing. The object is not reliable.
  I not understand yet what this means.

  Type: error
  Date: 20/06/2011
  Time: 10:44:16
  Event: 10005
  Source: DCOM
  Description:
  DCOM got error "% 1084" try to start the service EventSystem with arguments "".
  to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  {1BE1F766-5536-11D1-B726-00C04FB926AF} is 'COM + Event System'
  service.

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Find event of COM + in the list system and verify that the startup type is manual (startup). If it is not set to manual (start) right click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Also, look for Remote Procedure Call (RPC) in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started

  Type: error
  Date: 20/06/2011
  Time: 11:02:39
  Event: 10005
  Source: DCOM
  Description:
  DCOM got error "% 1084" try to start the service StiSvc with arguments "".
  to start the server:
  {A1F4E726-8CF1-11D1-BF92-0060081ED811}

  This type of error, click on the Start button and select Control Panel, administrative tools, Services. Find Windows Image Acquisition in the list and make sure that the startup type is manual. If it is not set to manual, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started

  Type: WARNING
  Date: 20/06/2011
  Time: 10:37:21
  Event: 18
  Source: i8042prt
  Description:
  The device sent an incorrect response (s) after a reset of the mouse.

  I8042prt driver is the driver of keyboard and mouse PS/2.

  This link can help with keyboard / mouse prroblem
  http://www.EventID.NET/display.asp?eventid=18&eventno=1480&source=i8042prt&phase=1

  McAfee is a bad choice for your antivirus. There is a lot more suitable alternatives to freeware. Microsoft Security Esentials is commonly recommended to these forums. Personally, I prefer AVG 2011 Antivirus (FreeEdition). Withdrawal could remove some of the problems you have.

• HP pavilion Dv6 laptop: does not start in normal mode, safe mode

  Hi all

  I have HP Pavilion DV6 laptop with windows 7 Home premium 64-bit OS. It was working fine up until two or three days.

  After that some software upgrades, it has stopped booting.   When I tried to start it in safe mode, it stops at disk.sys.

  I don't have win 7 OS CD or recovery CD.  So I downloaded the trail version of windows 7 SP1, I want to install this, but he is suspended the windows logo.  I Googled it has bitten, I loaded a linux kernel and access the hard disk.  I backed up all the files required by using this boot of linux.

  I don't know what to do now?  What is the problem with my system. When I ran the drive diagnostic. It was a failure. That means that I can't use this HARD drive?

  Any help is greatly appreciated.

  Concerning

  Stéphane

  Hi stephane,

  Well the error code certainly would indicate that the player began to fail, but just in case, you might try to wipe the entire hard drive first and then reinstalling the operating system as described below.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your Windows 7 installation disk will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk and try to reinstall Windows 7.

  If it still does not work, I think your only option is to replace the HARD drive.

  Kind regards

  DP - K

• Computer laptop XP only works in safe mode

  Until a few days ago, my laptop worked fine.  With the help of XP Professional.

  Now I start up, the Windows screen, then it shows a white screen.  I then turn off via the power switch.

  I can however boot in safe mode, but can't do much with it because almost nothing works, for example internet, backup disks.

  Any ideas?  I don't have XP disc as ths was all preloaded so can not try to reinstall.

  Thank you!

  Hello
   
  1. what changes have been made to your computer before the problem?
  2. do you get an error message/code?
  Follow the steps mentioned below and check if that helps.
  Step 1:
  Disconnect non-essential external devices and try to start.
   
  Step 2:
   
  Try last good known Configuration from the advanced boot options.
   
  Step 1:
   
  If this does not help, because it works fine in safe mode, I would put your computer in a clean boot State in order to determine if the problem is related to a software conflict of third parties. Clean boot helps eliminate conflicts of third party software.
   
  Note: Don't forget to restart your computer as usual.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• T510i cannot start in normal mode (safe mode of work only)

  Hi all

  As the title, when I turn on my laptop, it come to the logo of the window and then restart all of a sudden. And screen come to choose Safe mode. My computer can work in safe mode. After I restarted several times, it may come to Windows successfully. Then, he suddenly restart and return to select the safe mode screen. (Windows 7 installed).

  Please help me find the solution. Thank you very much

  Dear all,

  My problem is solved already. Mainbroad now is repair.

• Satellite L30 Vista screen don't be turned on; extrnal monitor works only in Mode safe

  Hello

  I have LS30-10s.
  first the laptop screen not lit up even if I saw a pale ghost of the icons etc.;

  I tried the fact to unplug and now the switch down (battery is dead long) successfully intermittent and random;

  I borrowed an external LCD (Lenovo $) and went well, and by pressing Fn + F5 would actually sometimes make the laptop screen live too.

  I changed the screen inverter and that seemed to restore the laptop screen, but the next time I restarted + or + screen would work unless I chose safe mode.

  Currently I can only use the screen external and only in safe mode.

  Everyone knows this?

  Hello

  Just a few questions:
  The external monitor works properly before disassembling the laptop and replaced the LCD inverter Board?
  What exactly happens if you start the computer in normal mode?

  Have you tried to start Notepad using a Live CD (PE Win or Linux live CD)?
  I would also recommend to check if new OS install is possible.

  Safe mode is just a test environment and the system does not access all recourses of material by using safe mode.
  So, theoretically the issue could be related to a faulty hardware or system problems.

• Firefox does not start except in Mode safe

  My in-laws use Firefox on their pc windows 7, but a few days ago it stopped working. I tried all the methods that I can find - disable hardware acceleration (it has no extensions enabled), reinstalled problems firefix, firefox reset - but the only thing that works is to use when windows is in safe mode.

  When I try and run Firefox in normal mode, the rotation icon appears for a few seconds and then more nothing. Don't even start and then crash, Firefox, nothing happens.

  Does anyone have suggestions as to how I could get a few details of what is causing the problem or any other resolution I could try that?

  Thank you
  Neil

  Enable Firefox through your firewall/Antivirus.

  • _ http://KB.mozillazine.org/Firefox: _Issues:_Firefox_Won % 27t_Startup
  • _ http://KB.mozillazine.org/index.php?title=Firefox: _Issues:_Firefox_Won % 27t_Startup & redirect = No.

• Internet connection only in Mode safe mode with networking

  I was using the Internet at home, when I had a pop up telling me there was an anti-virus program download. I pulled out the window pop-up, rebooted the computer and turned on safe mode with network. I thought it was just a problem of virus/malware/spyware. Since I installed several programs to prevent/remove any type of spyware (virus, etc.), I decided to run in safe mode, just in case. I ran the and after he said that my computer was clean, I restarted the computer in normal mode. The internet, however, did more work. He said that the Internet connection was closed portals HTTP, HTTPS and FTP. He also recommended that I check my firewall settings. I use the internet in safe mode with networking, and it works here though.

  I'm not really sure what the problem is with the internet settings. I could really use some help!

  Hi AngelicaR,

  OK, you should now check your firewall settings, to do so right click my network connection on your desktop-> select Properties (or click Start-> Settings Control Panel-> network connection)

  Now right click on your connection to the LAN->-> Advanced->-online advanced, settings, settings-the default settings online-> restore default settings. This will restore the default firewall on your local network connection. Click ok on the screen and restart your pc to see if its working.

  If you find the same problem again and then come to the same path: required connection to the local network-> settings-> Advanced-> settings-online Exceprions-> Tickmark the HTTP, HTTPS and FTP, also tickmark "display notification when firewall blocks a program" that will help you the notification to allow access through the firewall. Click ok on the whole screen, restart your pc.

  I hope this helps.