Laptop used fully boot up

Similar Questions

• laptop used to boot after update bios from hp site guard goes blue screen

  Hi I have a compaq mini 110 (model 110 c-1110sa) I've updated the bios on your website and now it won't start on XP don't know what to do to get another work please can you help me to get this working again and it is not provided necessary to Flash the bios in dos recovery so that he can work Meany thanks Chris

  still no luck with it can someone help me to make it work again

• I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

  I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

  Hi bobbymh,

  -Do you happen to remember the update has been installed?

  -You receive an error message when you try to start the computer?

  Follow the steps below:

  Method 1:

   

  Try to start the computer using the last good known Configuration and check if you can successfully start.

   

  For instructions, see How to start your computer by using last good Configuration known as Windows XP .

  Method 2:

  Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

  See to run the system in safe mode restore

  See also How to restore Windows XP to a previous state

  Method 3:

   

  Follow the steps listed in the following article:

  How to fix a computer that does not start

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• my laptop with vista booted up and I get a blank screen with a cursor that I can move.

  I have a PC Toshiba laptop with vista.  Everything worked well until one day he started upward and I get a blank screen with a cursor that I can move.

  I tried all modes of security with no luck.
  I noticed that when it starts in safe mode it will stop on windows/system32/drivers/crcdsk.sys every time.
  I did some research and found people have had the same problem and solved with a running repair disk, I did not.  Is there a fix I can do without the disc?
  Thanks for the help in advance

  I solved my problem.

  My problem is that some how I lost my video drivers, so I used hirens boot cd to get and discovered was my drivers were in the files and restored to an earlier date.
  Once it happened I restarted and again, I got a screen.
  I'm not sure how the drivers has been removed, but I ran virus checks and malware on my computer did not
  But its been fixed.  I was afraid that I would have to rebuild and go through the hassle to move my files and rebuild it but glad I do not have
  Thanks for all the help

• EliteBook: can I use a boot cd on a portable computer with disk encryption?

  Windows is sprinkled on a laptop with disc encryption.  Is there a way I can use a boot cd to access the drive?  I want to get some files off it first.

  Ok.

  Then the simplest solition would be to remove the hard drive, put in a drive enclosure hard or on a USB to SATA connector.

  Now you can plug it into a usb port of another Windows PC or laptop to your business.

  Use Windows Explorer to access the disk. When the encryption key is requested, type it in.

• How can I update the BIOS on my Sony Vaio laptop using disc or usb? Note: I can't windows at all.

  Hi, I want to know how can I update the current bios on my sony laptop using the disc or usb.

  I can't access the windows on the laptop at all, because I'm getting STOP: 0 x 00000 "a5 error that says: your bios is not fully compatible with acpi.»
  This error prevents me to access any live disc or recovery disks.
  I would like to learn more about records tho method.
  Thank you.

  Take it to a repair shop, you have damaged the card mother/connections

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• How to install XP on a laptop used, have CD/DVD but no product code

  I bought a laptop used on three or four years with a genuine version of XP Professional already installed. I have the XP disc with me (has "for refurbished PCs ' printed on it), however I do not have the product code with me when I moved to Southeast Asia. The laptop broke down so I will soon buy another used quality XP laptop.

  Is it possible to install XP on it without the product code?

  If so, is it possible to activate it without a phone call? I have a quad-band GSM, but the voice quality is very poor with calls long distance.

  Thank you

  No product key, no activation.

• Unable to connect to my server through my laptop using the selections of my network places.

  I can't connect to my desktop (server) via my laptop using the selection of my network places, even if the shared my cell phone directories are available from the desktop (server). Any ideas on how I can fix this?

  I recently installed McAfee Total Protection on my laptop.

  Unlike the Windows Firewall, many third-party firewalls (such as McAfee) manage outbound as well as inbound traffic.  Make sure that the firewall is configured to recognize your LAN as a "trusted network".

  I can't tell you exactly how to do this because McAfee is not user guides for its most recent products available - you can use the built-in help of the product for the guidance system.

• can I put adapter rated Acer 19V, 1. 58A, 30W on computer laptop use adapter 19V, 2.10 A, 40W of rated?

  can I put adapter rated Acer 19V, 1. 58A, 30W on computer laptop use adapter 19V, 2.10 A, 40W of rated?

  Hello

  N ° of 30W adapter will have a very short life span.

• my laptop used will not play DVD or cd

  my laptop used will not play the DVD or CD, he did and now it want

  Maybe the CD/DVD drive has failed and needs to be replaced.

• HP Pavilion L3S53EA 15: Laptop uses bad GPU

  I have a HP Pavilion L3S53EA 15 with 8 GB of RAM, CPU 2 GHz APU AMD A8-6410 and AMD R7 M260 2 GB GPU and also R5 integrated Graphics GPU.

  But, in games and other things, my laptop uses only one R5 and completely ignores the M260 R7.

  GPU - Z in GTA:V sensors

  http://GPUZ.techpowerup.com/16/08/24/NHW.PNG
  http://GPUZ.techpowerup.com/16/08/24/ZVJ.PNG

  AMD R7 M260 2 GB GPU:

  http://GPUZ.techpowerup.com/16/08/25/BSS.PNG

  R5 AMD GPU:

  http://GPUZ.techpowerup.com/16/08/25/kqg.PNG

  Tried all of this, does not work.

  And why are there 3 drivers on the HP drivers for my GPU page?

  How can I know which one should I install?

  Poor HP and AMD stuff, I'm disappointed.

  My HP laptop to get a desktop PC with Intel + Nvidia sales material.

  HP and AMD are a disgrace.

• Unable to connect to a Sony DV from my laptop using the firewire port after the installation of updates

  Original title: connection for Vista FireWire camcorder problem

  I used to be able to connect my Sony DV camcorder to my laptop using the FireWire on the camcorder and laptop.   Once it is connected the Movie Maker detect my camcorder and automatically transfer the video.  However, since I've updated my computer laptop July 13, 2012, my laptop does not recognize not the camcorder.  I checked my computer and your camcorder is not yet listed.  I checked the latest updates for the driver of the firewire port 1394 and is the day the device is functioning properly.  Can anyone throw any light on this.  The only thing I can think is that since the update, he may have done something for the connection.

  Hi Scarlett,

  Thanks for the post. I'm sorry to hear that the Sony DV camcorder is not detected.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the model number of the Sony DV camcorder?
  2. you receive an error code or message?

  3 update do you have installed?

  See the Windows updates are installed:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Please follow the methods and mark the question below:

  Method 1:

  First of all, let us check the status of the FireWire port in Manager devices to do this, follow the steps below:

  Check the status of the port in FireWire devices Manager

  a. Click Start, in the search box type Device Manager and press to enter.
  b. If you don't see the FireWire controller (probably listed under "IEEE 1394 Bus host controllers") in the list, then it is not correctly installed.
  c. If you see a yellow exclamation point, then you must install the drivers, who are usually on a CD that comes with the FireWire card with the camcorder.

  Method 2:

  Step 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack in Windows Vista:

  http://support.Microsoft.com/kb/948187

  Method 3:

  Connecting i.Link® (IEEE 1394) of the camcorder is not recognized by the computer.

  http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C86798&sliceId=1&MDL

  For more information, see the link below:

  Import analog video to your computer by using a DV camera:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Import video from a videotape:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have a laptop used with WIndows Vista, which came with a product key (the one on the label at the base is incorrect). What can I do?

  I have a laptop used with WIndows Vista, which came with a product key (the one on the label at the base is incorrect). What can I do to get one?

  What you trying to do? buy an operating system (like Vista for example) or to purchase Office (located on the top of Vista)?

  You can buy Office 2010 here: -.

  http://Office.Microsoft.com/en-us/buy/

  -If you want to. Be sure that it will run on Vista by checking the: -.

  The system configuration required

  -hyperlink on the page above.

  If my comments have helped please vote as helpful.

  Thank you.

  You can buy an operating system here: -.

  http://www.microsoftstore.com/store/msstore/PD/ProductID.235488300/TopSeller.true

  For future use, the type of problem you have raised should be posted here: -.

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?page=1&tab=no

• Laptop using Windows Vista Buisness cannot change domain password

  My laptop using Windows Vista business can't change password is field - the error message is "username or password is incorrect."

  I can connect to the network very well.

  Other users have tried to change their passwords on my laptop and have the same problem and I can change my password on another computer connected to the network.

  My laptop spends most of his time out of the network.

  Domain is Windows Server 2008r2.

  And no, I do not use the German version of Vista.

  WTF?

  Hello

  I suggest you to send your query in Microsoft TechNet Forum because the computer is connected to a domain. Here is the link for the Microsoft TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread