Laptop wakes up immediately, but external second screen) takes half an hour to wake up.

Similar Questions

• Should HowHow I send my resume to your laptop to an IPad. I have another laptop which is mine, but I want to take the original turned off my phone friends to put on my own?

  So I ask two questions. How can one, I send my resume to my friends laptop, my iPad? And also how to send the CV to my laptop? I have to be able to send it, but what are the steps to do it?

  No doubt you have email on your iPad? Just send by email.
  Or upload to Skydrive and download on the iPad - the possibilities are endless...

• Why is my second screen does not work - it starts with my main screen, but then turns off.

  My HP Pavilion P7-1120 Desktop PC does not work with two screens - there 8gig of ram...  1.5 terabyt hard drive, Windows 7 64-bit primary system works via the VGA port, but the second screen does not rest via the DVI port.  The two normal startup with the start-up of information on both screens, then the secondary display stops and I get a message "no signal".  Both monitors worked with my laptop PC and older myDell...

  When I go into the control panel and the view tab - the PC does not recognize the second monitor.

  GEO...

  It's not a problem with my PC or whatever it is in the box.  Cables work on other screens of the RGA and DVI.  There is a problem with my screen - the works of port RGA, is not the DVI port.  Another monitor works properly by the DVI.

  Now fixed.

  TKS for the entry.

  GEO...

• How to push the second screen?

  Hello

  I am writing an application in which I'm trying to push a second display to a custom in the first menu item. The first screen is pushed successfully and the custom menu items are filled with a bluetoothserialportlistener. Once I click on a special menu item, I want to launch the second screen. I used a dialog.alert to verify that the the menuitem run() method works, but the second screen is not displayed.

  Any suggestions are greatly appreciated!

  The first screen is created by hand (String [] args)

  MatMain app = new MatMain();

  app.enterEventDispatcher ();

  private MatMain() {}

  pushScreen (new WelcomeScreen());

  }

  I tried to call the second screen as follows:

  synchronized (UiApplication.getEventLock ()) {

  getUiEngine () .pushScreen (new MatOnline (_info));

  }

  I also tried:

  UiApplication.getUiApplication () .pushScreen (new MatOnline (_info));

  Thanks again!

  Hello

  I think you're trying in a very complex way.

  Your architecture using complex and ignoring the bluetooth codes related, I can see your second screen with a minor modification.

  In your DeviceMenuItem class.

  replaced

  MatMain.getUiApplication () .pushScreen (new MatOnline (_info));

  with

  UiApplication.getUiApplication () .pushScreen (new MatOnline (_info));

  And in your class MatOnline:

  replaced

  HorizontalFieldManager _fieldManagerOnline;
  with

  HorizontalFieldManager _fieldManagerOnline = new HorizontalFieldManager();

  Concerning

  Bika

• My laptop screen fades dying, a second screen plugged... but it displays as a part continues to right-hand side of the screen

  My laptop screen fades dying, connected a second monitor. I need to do (in display) do the pluged in the number one monitor.  Because it shows now it acts as an extension (on the right side of my screen.  My mouse pointer can migrate from one screen to the other and my start maing buttons that I don't see on my laptop screen.  What I really want is for the two monitors to show an identical copy of one.  Or at least put the plug in the monitor by default #1 and lapbopscreen #2 I hope that this will make sense I help eed before the screen of my laptop completely died please...

  Hi VictorReventlow,

  Try the following steps to extend the monitor on the second screen.

  1. In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to use in addition to your primary monitor.
  2. Click to select the checkbox extend my desktop on this monitor . After enabling this feature, you can drag items across your screen on alternative screens. Or, you can resize a window to stretch it on several monitors.

  For more information, see the articles below.

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

• How auto turn off the screen of the laptop when you use the external monitor?

  I don't wan turn on laptop screen and my external monitor at the same time. So is it possible to do automatic screen of my laptop to turn off as soon as I plug my external monitor to my laptop vga cable (without pressing Fn + F2 keys)?

  Please help me.

  Thank you.

  I don't know if it's possible, but you could try to go into display settings and set an external because it is main if possible display and then disable the laptop with Fn + F2 but idk if it will remain inactive if you portable computer power, then on again :/

  Update: how to do this, right-click on the screen area and select the screen resolution while having the connected external display then of you will find a drop down a 3rd or a 4th do not remember but inside, you'll find stuff like show desktop on the screen 1 or 2 to find out what your external display screen number is and apply it to this form then computer laptop screen should turn black as it is turned off and you will see desktop area is on external display so I hope that this has resolved your request.

  PS don't forget to press Bravo if it helped

• Laptop of HP 2000: why my PC can't project to a second screen?

  This message appears whenever I try to my PC for a second screen of the project: your PC can not project to another screen. Try reinstalling the driver or using a different video card. What should I do? Tried to update my device driver, but it shows that I have the latest version of the 4000 Intel HD graphics driver.

  FanHP1

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your message want to project to a second screen and wanted to help.

  HOW is the second display connected?

  Request because if you click on the Notification area in Win10, you will see a project tab and if you click on it, it will display screen options - so you can project to a connected monitor.

  However, if the parameters of resolution does not show the second screen, then project will not work.
  
  It could be a problem with video drivers, but in order to see what is available, you must follow these instructions to enter your number of detailed product: find your model of HP product number. HP® customer support
  
  We can proceed once you provide the information.
  
  Thank you

• HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

  Hello

  I upgraded Windows 8.1 to Windows 10 yesterday.

  Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.

  When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"

  On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.

  Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.

  Thank you best regards &,.

  Umesh

  Here are the technical details:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF

  It is HD4400 Intel graphics

  Try the Intel driver update utility:

  https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

  Download drivers HP pages not available right now.

• The problem that I have for a week, it is that my screen is fine when the laptop is plugged in but fades when it is not plugged in.

  I have a Samsung NC10 that I bought in 2008 and the problem I've had for a week, it is that my screen is fine when the laptop is plugged in but fades when not plugged in - it ' s like going to a brightly lit room, in a room where the lights are dimmed... What can I do to remedy this? My battery runs down? Can I us my laptop plugged it my battery die? I must admit that I left basically still my laptop plugged...

  Check the settings of the display under battery power and adjust accordingly - How to adjust the brightness of the screen under Windows XP.

• On turning on my laptop that I keep seeing a black screen for about 20 seconds.

  So, I got a few problems of starting time. On turning on my laptop that I keep seeing a black screen for about 20 seconds. Seeing a few forums I have seen that this should not take more than 5 seconds. I have a dell Inspiron 15 3537. Please help. "

  Hello

  Please download CCleaner here and when it is installed, open it, appointment on the 'clean' tab, leave all the boxes even and click run while cleaning.

  When you have done this, go to the 'Tools' tab, select uninstall and bottom right, select Save to text file, select a file name for it, and then open the saved document. Send the contents of it in your next reply.

  It is possible that it is caused by corrupted files. You can try to run the System File Check to check (and challenge!) corrupted files.

  Use the System File Checker tool to repair missing or corrupted system files.
  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  You can also have a third-party application installed on your computer that is the cause, so try to perform a clean boot Mode, which is executed at Windows startup, by using a minimal set of drivers and startup programs.

  How to make a Windows-specific Startup Mode.
  http://support.Microsoft.com/kb/929135

  It is also advisable to run a scan with Malwarebytes Anti-Malware to check all infections.

  Thank you.

• MacBook Pro recovery, second screen goes blue

  I have connected a second monitor via HDMI to my Macbook Pro, but when the Mac goes to sleep after having no use, the second screen will able. How can I make a screen saver is on the second screen. The screens are not mirrored. The law as one long screen. Thanks for the tips

  Hello SaadSydney,

  These are the facts as I understood your message:

  -You have a MacBook Pro that you use in conjunction with an external monitor which allows you to extend your Mac display.

  -However, when you put your Mac to sleep, the external screen goes blue.

  -Instead of your external monitor turning blue, you want it display a screen saver.

  It is important to note that any screen connected to your Mac screen may not show a screensaver mode 'sleep'. I don't know if your external monitor itself allows you to choose a screen saver and let it run while your MacBook is asleep, but otherwise, there is no inherent solution corresponding to your query in OSX El Capitan. Perhaps that is the reason why your external screen goes blue when your Mac goes to sleep - it is always plugged, but we can think that there is an error or something similar allowing him to view any content, even if it is plugged.

  If your MacBook itself displays a screen saver, but not in mode ensures your external display also displays this screen saver.

  Hope you understand,

  -RamalTheCamel

• Satellite P50t-B01E - BD Player does not play using the second screen

  Using PC mode "extend", dragging player across the second screen causes reader Toshiba BR disable playback of the disc. The drive interface moves on, but the game is not possible.

  Other media and the information can be consulted. Connecting via HDMI.

  Thanks in advance.

  I guess you will be able to use the player Blu-switching the video output for external monitor without the use of the extended mode.

  Could you confirm this?

• Satellite M30X-129 - no video on the second screen

  I have a M30X-129, which for the most part works fine. However, when I have a second monitor attached (for example, an overhead projector) everything is displayed outside a video/film clip, which appears black. This occurs if Windows Media Player or Realplayer is used. All other programs and images are visible on the external monitor or laptop screen.

  I installed Windows XP Pro on the orig XP Home version. All drivers were installed and updated as required. I thnk I have a Raedon graphics card.
  Any ideas on how to have movies/clips on the second screen?

  Thank you.

  Hello

  Most Windows applications and video cards do not support playback of video files on the screens at the same time. You can try to disable the video signal going to the built in LCD screen and display only through the projector.

• Satellite P200-144 second screen projector flickers

  Hey all

  I bought my new Toshiba P200-144 just so I can use DJ software.
  The problem is when I plug in the projector via a VGA cable and use it as a second screen. As soon as I put the projector as a second screen, this screen will be flashing all the time? even if I put the laptop in 1024 x 768 screen, the screen will be teetering in 1440 res? NVidia will come out a new driver?

  Can someone help me please and is there any way to get rid of him flickers?

  Thank you

  Jay

  What do you mean exactly?
  Don't resolution screen automatically switches always the 1440 x? resolution or display quality is bad?

  Hmmm. I don't know if it is a possible graphic driver problem m it s a projector wrong setting? You connect the external monitor (not a projector) to check the second screen quality?

  Have you checked the different nVidia settings? You should do it.

• L540: password accepted anywhere but the login screen

  Hello!

  I was happily using the sensor of fingerprint on my L540 for awhile, until what a few months ago, I reinstalled Windows 7 (Professional, x 64). After setting up everything, and by installing drivers Lenovo, I noticed this problem:

  When I start the laptop and you type the password, it will accept it.* but if I open the dialog to change, Windows will claim that the password that I type is wrong. I tried several times, also copy - paste where she had changed the layout of the keyboard, but just, he does not accept the password that works on the logon screen.
  The same thing happens when I close the laptop and it goes into sleep mode, and then I try to connect again. In this case the only thing that helps is to extinguish completely the laptop and restart.

  For a while it would not also accept the password on the login screen * front * password indication was shown. Of course maybe I just typed it, but it happened very regularly for 1-2 weeks or more. At one point that specific question came not, without changing me anything.

  In short, I can't set up the fingerprint sensor because I have to type the password, and I can't change it to something easier. This particular password wasn't supposed to be typed much. I trusted that the fingerprint sensor would work.

  I thought that it might be caused by one of the drivers, given that the problem started happening immediately, but only a few days after that I want to install Windows. (My memory is a bit blurry, sorry).
  Then I threw most of the drivers I downloaded manually (especially the keyboard driver and fingerprints) and installed a package that installs drivers automatically, but that has not changed anything.

  I have no idea if this would be a problem of Lenovo or a Windows problem. Can you give me an idea where to go with this problem?

  Thank you very much!

  Easiest thing would be just to use the new account. But what about the why, that's happened, I don't really know why. =/