Laptop will not start light caps and seeing flashing Num

Similar Questions

• Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

  Laptop will not start. Ran startup Memory Test-am failure

  Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

  Product ID: B8M97PA #UUF

  MEMORY MODULE

  Window7 as operating system

  Any help would be much appreciated!

  Hello

  Try the following.

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

  Kind regards

  DP - K

• Pavilion dv9810us: computer HP Pavilion dv9810us laptop will not start

  Reminder: a few days before my laptop does not start up, all using the laptop, the screen has become, I guess the technical term would be 'nuts': horizontal lines an inch in height, made of blocks quickly black and white, all changing left and right, and I could see my spreadsheet in the background.  Could not do something about the problem, so I rebooted and it worked fine.

  Then a few days after that, I tried to turn on my laptop, and occurred the following:

  (1) blue illuminated switch, control all the keys lit in blue (volume, skip, repeat, DVD...), fan began and heard the dvd begins to check for a disc.  This lasted for about 2 seconds.

  (2) off laptop (all lights extinguished, no fan noise or a dvd).  This lasted for about 5 seconds.

  then it would just repeat steps 1 & 2 times: start 2 seconds, stop for 5...

  Steps that my work to correct (without success):

  -J' I disconnected and removed the battery.  Let stand a few minutes.  After I have inserted the battery and reconnected, I pressed the power button.  Same 2 steps as shown above (lit for 2 seconds, turn off for 5, repetition) happened.

  -saw a post on the site of HP on a hard reset.  so I unplugged, removed the battery, which is held from the Start button / stop for 20 seconds.  then replugged (without inserting the battery) and power on.  Same 2 steps above happened (lit for 2 seconds, off for 5, repetition...).

  -J' I reset memory as someone on the HP Board has suggested:

  (1) remove the two memory, then replace both in the correct order.

  Result: same problem (2 seconds 5 seconds, repeat...)

  (2) remove the top memory (1 GB), bottom (2 GB) by leaving in place.

  Result: same problem...

  (3) place 1 GB memory on the bottom, nothing over the top.

  Result: same problem...

  From the above information, no idea what the source of the problem is, and how to fix it?

  It would be to remove the motherboard and "re-invest" the video chip with a heat gun. Configure you with a shield from sheet aluminium with the chip pushing through like dessert in a TV dinner. There are many tutorials online, but like anything else go you better the more you do and the first time is risky. Repair shops using a better process called "reballing", which is basically rebuild the chip and requires hardware, that no individual can afford to have.

  Access to the old hard drive is easy. Physically, remove it from the machine.

  https://www.YouTube.com/watch?v=B3tAGVzCS7w

  See 02:20 in. You must remove the plastic adapter for in standard SATA ports. You can leave it in the basket after removing the plastic adapter bar. Then use a usb to SATA adapter and you can plug the old drive on USB ports on your computer again, and it will appear as a USB key where you can copy and paste things out of it to the new PC.

  http://www.Amazon.com/STARTech-com-SATA-drive-adapter-cable/DP/B00HJZJI84/ref=sr_1_1?ie=UTF8&QID=1432146725&SR=8-1&keywords=USB+to+SATA

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• My ACER laptop will not start Vista

  My acer laptop does not start correctly. It loads after windows bar loads and then it stops quickly. the pointer will appear on the screen and when it is left idle, screensaver maker runs. the same thing happens when I try to start in safe mode. What should I do? any help much appreciated.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to reinstall Vista on an Acer:

  "With the help of the outside Windows Recovery Management"

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  See you soon.

• Laptop will not start without the battery attached

  Hello

  I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.

  If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.

  Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.

  So my question is: what is a motherboard or a problem with the AC adapter?

  The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.

  Thanks in advance.

  Hello

  Visit this link

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&CC=US&DLC=en&lang=en&LC=en&Product=5081068&Query=dv7-6052ea&Tool=

  Good Luk

• my laptop will not import my photos and my itunes doesn't sync new music

  I'm not sure that the question is my Iphone 5 or the laptop. When I plug my phone both the laptop and the phone between them pick up and my phone syncs automatically, however, my phone always wonder if I want to import new photos and then once I clicked on Yes, it says that no pictures are available. Also when you try to import pictures on an app on the phone, he could not pick up one of my recent photos.

  As well as what I downloaded some new music on my itunes on my laptop, however, given that I brought music apple songs downloaded on my itunes on my laptop will not sync and I don't know why. The phone syncs and always put my new music on the phone when it syncs, but it's their import is no longer automatically.

  Thanks for any help in advance.

  You can copy photos manually from the film. It might sound like a somewhat random Folders collection.

  With Apple active any music that you add to your library becomes automatically available for you to download or listen to on your device. Music sync via USB, however.

  TT2

• Adobe Reader DC will not start.  Uninstalled and reinstalled.  Does not start while I can change protected view.  Any ideas?

  Adobe Reader DC will not start.  Running Windows 8.1.  Uninstalled and reinstalled.  Will not start.  Any ideas?

  Hey You,

  You get any sort of error message when you try to start the player?

  Please uninstall, run the cleanup tool to remove all traces and then reinstall it from this page: https://get.adobe.com/reader.

  You can get the cleanup of this page tool: Download Adobe Reader and Acrobat tool - Adobe Labs.

  Best,

  Sara

• Downloaded ServicePack3 and my laptop will not start now.

  When I start my laptop: first of all, it takes several minutes to go... then it takes me to another window with this message: "cannot start Windows. a recent hardware or software change might be the cause.
  Then it gives me two options: 1) launch system recovery center and 2) start windows normally
  If I choose #2 it will go a little crazy with all kinds of numbers/letters flashing on the screen, then it will get stuck; "!! 0xc01a001d! 28480/89829 (Registry\machine\machine\COMPONENTS\Deriveddata...), then it will be there for days... literally. At this point, I must close. If I choose the option #1 it will give me these choices: REPAIR of the BOOT SYSTEM RESTORE a) b) c) WINDOWS COMPLETE PC RESTORE(need backup disk wich I don't have) TOOL of DIAGNOSIS MEMORY WINDOWS) d (e) COMMAND PROMPT

  When I choose to START REPAIR, it will attempt to repair and then take me to the RESTORATION of the SYSTEM where it will get stuck and do nothing and once again I must close all otherwise I eighther have disc for or no idea haven't had to use it (i.e. COMMAND PROMPT)

  so if there wasn't a soul who can help with this little dilemma of my friends I would be very happy. Tank you in advance.

  Jose

  You see the effects of a hijackware infection!

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Pavilion dv7-1240us: preheating indicator light, a fan noise is heard, but the screen remains black, laptop will not start.

  Perform a hard reset

  I added an external monitor and restart the computer. All seeing power are on, fan and hard make sounds and still nothing on both screens.

  Reinstall all hardware

  Still nothing but black on both screens.

  Is it possible that a virus could cause black screen and does not start.  Seems the laptop crashes, because all the lights remain.

  Please notify.

  Hi there @SVJ69

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you get a white screen when you turn on your system. I'm happy to help you with this. I would recommend that you start with searching through this page. Since the construction in and external display do not respond, I would start with the displays.
  Troubleshooting of black screens with no start-up or start-up error message
  Problems related to laptop (Windows 7 and Windows 8) displays

  This can help more evenly. If another hand, you get error messages, or a repetitive pattern of flashing LED, let me know.

  Computer won't start (Windows 7, Vista, XP)

• Laptop will not start. It starts again and again

  My 8510W does not start. It starts again and again and I can not start safe mode.

  I think my hard drive is dead. Am I wrong?

  It is a 500 GB WD Scorpio Blue. Can I replace it with a 1 TB drive?

  Donslund wrote:
  

  With Windows XP, the laptop was when I bought, so the recovery partition is not Windows7.

  Ok. Since you can't in safe mode, and then put it back would be a good option.

• L50 - A satellite - state of the power supply is lit, but laptop will not start.

  Hello
  A few months ago, I bought a new Toshiba laptop L50 - A Satellite. He worked incredibly in all directions until about a week ago when it lights. He has been connected to the charger with the charging light but does not illuminate. When I press the power button, the small ring of orange around the button light turns on and will be so all the LED lights on the front of the laptop, as well as I can hear the fan and other work items, but the screen remains black. This has been the case for a little over a week now and at random, two of the times I tried to power on my laptop, he turned on and working but then after that be cut, it wouldn't work again. He has not worked since 5 days and since then I tried to turn it on.

  One of my friends who knows a thing or two suggested perhaps it was the display that was defective and should I try to connect it to my TV via a HDMI cable. This seemed logical, so I gave him a test in the hope that he'd at least let me know what was the problem, but no fixed image displayed anywhere.

  My laptop is almost always connected to the charger and an expensive cooling fan, so I guess that battery and components must still work most of the time, and I've read that this laptop is designed so that you cannot remove the battery, but I do not know how to in any case.

  I tried a few different methods to try to start it as now the Start button / stop and the ESC key for 10 seconds, now back while pressing the power button and pressing the power button while pressing F8 repeatedly. But none of them worked so far.

  If anyone has any ideas or a way to help, that would be greatly appreciated.

  Thank you, Julian.

  Hello

  The L50 - A Satellite supports a stop (hole) switch located at the bottom of the unit.

  Cell phone is freezing, do not start or has a power failure, which cannot be resolved by pressing the button for 10 seconds (force shutdown), please use stop force switch instead of the main battery.

  During a stop by pressing this button force, the behavior of the system is identical to unplug the AC adapter and remove the main battery.

  More details here:
  Stop power switch (hole) for models with one main battery sets
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  Hope this helps

• my HP laptop will not start

  I tried to open it through safe mode, but it just frozen and did not open. This happened once before, but it opened in safe mode, that day.

  I opened the system diagnostics and did a test that does not start. Failure ID is:

  PU28Q1-5AD5659-XD002k - 60-X 303

  another failure ID is: PU28Q1-5AD5TC-XD002K-60SF03

  Please tell me any information you have to help.

  Thank you!

  Hello

  You are welcome

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 47 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - for more details, see the document here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Help, my friends laptop will not stop blue flashung and it does not click on something

  Ive tried many things but the flashing interrupts it will not do anything. Help, please

  I think I can have it fixed I hit and refreshed the comp. lets see

• HP laptop will not start and cannot reload Windows due to corrupted files

  I have a HP laptop, (belongs to my grandson) and am not able to reinstall Windows. I get an error 0xc0000098.
  I wanted to get into the Bios to format the hard drive, but I could not.
  Any suggestion to solve this problem?
  Thank you very much.

  John

  Hello

   
  1. What is the model of the computer?
  2. Once you get the error message?
  3. What is the exact full error message
  4. have you made changes on the computer before this problem?
  5. what version of Windows you are trying to install?
   
  For the information of the BIOS:
  I suggest you to consult the manual of the computer. You can also download the manual of the laptop from this link using the laptop model.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can contact the manufacturer of the computer for the installation of any related issue of BIOS support.

  You don't have to go into BIOS to format the hard drive.

   

  Consult the following links if you are using Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

   

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-installation-problem-cant-boot-to-installation-disc

   

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

   

• Windows Firewall and Security Center will not start, error 1068 and 1079

  I can't start my firewall Windows, error: 1079... or Security Center, error: 1068. Can help you with this question? When I try to access the Dependencies tab I get this error: Win 32: the specefied for this service is different from the specefied to account for other services running in the same process.

  I checked to see if dependencies were the same account before I got the message of 'Win 32' and WMI Service runs in the same account (Local Service) as firewall and Security Center, but the RPC Service is running on the Network Service account and cannot be changed via the services console, because the account fields are gray and cannot be viewed or modified. I try to avoid using the tool 'SubInACL' because I don't want to reset the whole registry.

  Help, please!

  The other post:

  I had a problem with obtaining the Windows Firewall and Security Center to start. Service account permissions have been changed at some point, including the depedencies. I get the error 1079 on the Windows Firewall and 1068 on the Security Center. Both are defined on the Local Service, but dependence, the CPP is set to Network Service and cannot be changed because the user fields are gray. I try to avoid using the SubInACL.exe because I don't want to reset the whole registry. Can you help me please?

  No, I'm not on a domain. I connect via a open wireless "hotspot". My main problem is; I don't have a Firewall or Security Center. Nor will begin. I get the error: 1068, to Security Center and an error: 1079 on Windows Firewall. When I try to access the dependencies on either I get this window:

  WIN 32: The account specified for this service is different from the account specified for other services running in the same process.

  A month ago I made the mistake of trying to brand of ACDSee of security, "ACDOne" which includes software "BitDefender". That's when I lost my firewall and Security Center. BIG MISTAKE! I uninstalled and deleted all the files that I found that have been left.

  My Security Essentials and Windows Defender work very well. I'm stuck and need help with this please! Please, I beg you! Someone... Help!

  The system cannot find the specified file.

  http://support.Microsoft.com/kb/947821>

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

  UTC/GMT is 02:51 Wednesday, April 25, 2012