Laptop Windows 8 set manually to a specific outdoor network, why?

Similar Questions

• Laptop (windows 7) doesn't recognize computer (XP) desktop network, but connects to the wireless router

  I have two computers (desktop and laptop), a plug-and-play printer connected to the desktop computer and a wireless router.  My laptop was connected to the printer via a family group on the network connection.  I've recently upgraded the OS on my laptop from Vista to Windows 7 and now my phone does not even recognize the MSHOME network which was initially established.  I am able to connect to internet via wireless router (Verizon MIA 424 - WR... or something like that) but I can not connect to desktop files, devices on it and above all terribly printer.  What's weird, this is my office always recognizes my laptop and can even connect to my laptop from my desktop.  The network is established by the office which is running XP.  Not sure if this helps, but I remember when I set the laptop computer connection / original printer, I had to do a port mapping step funky.  Any help would be greatly appreciated!  FYI, I did everything suggested by microsoft windows help.

  NET

  Hello

  To access the XP of Windows 7 computer, you can:

  a. type the name of the XP computer in the Start > box Search in this format:

  \\computer

  b. press the Windows key + R and type the name of the XP computer in the same format.

  c. click Start > network , then click on the XP computer.

  For more information on the networking of computers running different versions of Windows, see this article:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Computer N5030 laptop Windows 7 starts only mode, safe mode with networking and I have no audio and Hifi. Help!

  I have a laptop N5030 Windows 7. I can only start my system in safe mode with network and I have no audio and Hifi.  Help!

  Hello. Maybe it's a software or a hardware failure, then run the diagnosis of ePSA on hardware. It is normal to have no audio in safe mode.

  I had a similar problem a few months ago due to the failure of one of my modules of RAM.

• Reader Acrobat 7 I downloaded was not compatible with my laptop Windows 8, pls help!

  Dear friends,

  My name is Terry.

  Reader Acrobat 7 I downloaded was not compatible with my laptop Windows 8, pls help!

  Thanx.

  Why you try to install the Reader 7 expired?

  The current version is the free Adobe Reader XI

  PDF reader, PDF Viewer | Adobe Reader XI

• My Windows 7 PC cannot see themselves on the network.

  My Windows 7 PC cannot see themselves on the network. Under the heading network in Windows Explorer when I try to extend the C drive, I get an error message saying that Windows cannot access it. Also, I can't access this PC from a PC in 10 Windows on the same network - this error message indicates that Windows cannot communicate with the device or resource. It is available, but it is unresponsive to attempts to connect.

  I have tried turning the firewall off temporarily, but this makes no difference.

  Can access my PC Windows 7 Windows 10 PC and a laptop Windows 7 without any problem.

  Integrated network diagnostics do not come to the top with something useful.

  OT:

  Windows 7 networking

  Hello

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  There could be several reasons for this cause and to diagnose the problem, we can try the following steps and check.

  Step 1: Check if the network discovery is turned on.

  Please refer to: enable or disable network discovery

  Step 2: Check Event Viewer for detailed information on the problem. Consult the following links.

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Step 3: Search the computer browser service, if it is running.

  1. click on Start, type services.msc in the start search.

  2. search for the computer browser service.

  3. right click on the computer browser service and select Properties. Check if it is started.

  4. If it is stopped, select Start or restart. Make sure that the service is started and set as Automatic.

  5. click apply and OK, if you make any changes.

  Step 4: Temporarily try to disable the antivirus on the computer program and check if the problem persists. If you are able to connect, you may need to check for updates and firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Disable the anti-virus software

  Step 5: Make sure that the name of the network working group is the same for all computers. Also try disabling some protected sharing and check for the issue.

  1. Open advanced sharing settings by clicking theStart button, thenControl Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2 click to expand the current network profile.

  3. by password protected sharing, click turn off password protected sharing, and then click save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, try to perform a SFC scan to see if it solves the problem. Read the following article.

  Use the System File Checker tool to repair missing or corrupted system files

  Also refer to:

  Networking of computers running different versions of Windows

  Why can't I connect to other computers?

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Setting up windows xp as a server desktop and by linking a laptop Windows 7 via linksys E2000

  I have a Dell Inspiron desktop on windows xp computer. I just plugged by ether net to a Linksys E200 wireless router. I was able to get my wife to recognize the router's cell phone and take the line with two computers (desktop via ether net, wireless laptop). My problem is: I can't do both at the network as a whole if I can use the office as a shared print server (USB Canon Mp170 printer). I am licensed and cannot afford to buy a wireless printer just for the laptop, so I would like to make this work. I tried the dell networking tool, I tried windows networking and they are not "see each other... any ideas?

  Hello

  You must configure the printers to share on the XP computer and install the drivers for the printer as a network printer on other computers using the correct version for each computer.

  To set up sharing system.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• Network problem, Xbox 360, laptop Windows 7

  Problem: My laptop does not connect to my xbox 360 via ethernet.
  I ran into a problem trying to set up my xbox as a test ground for the xna development. My xbox is used to connect to xbox live through my old XP desktop, it refuses to acknowledge even my laptop with Windows 7. I tried a variety of bugs, including the network settings on the xbox and laptop of compensation, reinstall the drivers for the network card and copy network settings from my desktop to the laptop. I currently have unique network cable from my xbox to laptop. No I don't have a WiFi connection at home. However, I have a hub, but I know that xbox network adapters is able to switch so I don't see what difference that would make. Any ideas? Maintaining the xbox gives an error saying that the router is not assign an address id Oh yes the ipconfig info:

  Windows IP configuration
  Ethernet connection to the Local network card:
  The connection-specific DNS suffix. :
  IPv4 address..: 192.168.0.1.
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. :

  Hi nmagness,

  Please use the Microsoft Windows Forum.

  Top of page Solutions
   
  Try these solutions in the order. If give you each one a shot and you can always connect, contact Xbox customer service.
   
  Solution 1: Check your network
   
  Make sure that your PC is turned on and connected to the same network as your console. You can quickly do this by physically checking that your PC is turned on and all cables are in place, but you can check in 'ping' of your console to the PC. Ping from your console, you need the IP address of your console.

   
  To get the IP address of your console:
   
  1. in the Xbox interface, go to my Xbox and open Control Panel.
  2. Select network settings, configure the network.
  3. on the basic settings tab, select IP settings.
  4 enter the number of IP address (for example, 192.168.1.9). You can leave the network settings area, but leave your console.
   
  Ping on your console from your PC:
   
  1. If it is off, turn on the Windows Media Center computer.
  2. click on start, run, then type CMD and press ENTER.
  3. at the command prompt, type PING and the IP your writing (for example, PING 192.168.1.9), and then press ENTER.
  4. If you see a series of replies, then your PC 'sees' your console. If you see a series of replies "Request timed" out, then it cannot find your console.
   
  Again, make sure your console or PC are connected to the same network.
   
  Solution 2: Check your PC firewall
   
  Your PC can block your console to connect by using a firewall to filter traffic by blocking ports. You will need to open some ports to connect to your PC.
   
  * Learn how to open ports in the firewall Windows 7 : http://windows.microsoft.com/en-US/windows7/Open-a-port-in-Windows-Firewall

  Follow the steps for Vista in this article: http://support.microsoft.com/kb/908885

  Post your question in the xbox to better support forum: http://www.xbox.com/en-us/pcsetup/xboxnetwork.htm

  See also: http://support.xbox.com/support/en/us/xbox360/xboxlive/getconnected/setupahomenetwork/windowsicsconnection.aspx

  Kind regards
  Aziz Nadeem - Microsoft Support

• computer laptop Windows 7 saves not CD / dvd

  my computer laptop windows 7 is no recorded any cd / dvd... Ive checked everything on my computer and online, but couldn't find a solution! does anyone else have this problem? If so how do solve you this problem? Help, please...

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and

  
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The difficulty to restore my laptop to factory setting.

  I came home one day to find that there was a virus on my HP Pavilion Dv7 - 4009tx Enterainment Notebook PC and since I had important things backed up on my external hard drive I have much better just to restore my laptop back to factory settings, I find the best way to get rid of problems like this. (they rarely anyway).

  So I turned off my phone and then launch it and press F11, the window with three boxes popped up, I already knew what to do but the ability to set my laptop to factory settings was not in the first box where it should be, thinking that I made a mistake I looked on the internet and it said : this is how you do it. Confused out of my mind as to where the option went I tried the three other options available in the "I need help immediately" box and however the laptop has restored back to factory settings, but not completely, programs and software initially provided with the laptop were no where.

  I tired the other method to restore using the Restore Manager, option restore my laptop to factory setting was there to my greatest joy and I clicked it expecting it to be restored, but rather after the restart he come to a window with the restoration of the system and repair the start and a few other options.

  I'm really lost to restore my laptop to its factory originally settings as I had done a few times before. Nobody knows what is happening or what I'm doing wrong. My laptop runs only two years soon which means that it is not that old to have this kind of weird problems and I really need my laptop to do my uni work, I need to fix as soon as I can.

  Hello

  Virus problem has probably corrupted the partition on the computer. In this case, you will be unable to perform a factory reset of the recovery partition.

  You will need to perform a recovery using the HP recovery discs. If you have not created any recovery media after the purchase, you can order online them or directly call the technical assistance for the embedded discs out to you. This operation brings the computer to factory again.

  Here is the link to order online:

  Order of the recovery disc for Windows 7, Vista or XP

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• Can a system pre-installed with Windows Vista be manually downgraded to Windows XP?

  Can a system pre-installed with Windows Vista be manually downgraded to Windows XP?

  original title: Windows Vista to Windows XP?

  Can a system pre-installed with Windows Vista be manually downgraded to Windows XP?

  No, you can't downgrade. But you can probably * clean install * Windows XP.

  I say "probably" because there is a potential problem with drivers XP being available for all hardware. If the computer is a laptop, this risk is greater. So check with the manufacturer or on their web site to make sure that all the drivers you need do not exist for XP.

• When I open my external hard drive via laptop, windows Explorer restarts automatically.

  When I open my external hard drive via my laptop, windows Explorer restarts automatically. Why is it so? It opens perfectly well in other major tours. I use windows vista.

  Hello

  ·         You receive an error message when you restart the Explorer?

  Method 1:

  You can run a scan on the hard drive to check for errors and repair if there is no performance problem.

  Reference:

  Check a drive for errors

  Method 2:

  Attempts to start in the State of clean boot and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  You can also perform a check and scan SFC if it helps resolve the issue.

  Refer

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

• How to turn windows Defender on manually, because every time I try to turn it on it sending a windows defender error 0x800106ba

  original title: 0x800106ba

  Hi I want to know how to activate the Defender windows manually, because whenever I try to turn it on it sending a windows defender error

  0x800106ba

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender running?

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Unable to share files or printers between windows vista desktop and computer laptop windows 7

  I'm trying to set up a home network, I have a windows vista desk top and AComputer laptop windows 7 I have already created a network servant but no machines recognize each other

  Please see the advice contained in the sharing of files and printers with different versions of Windows and networking of computers running different Windows versions . Boulder computer Maven
  Most Microsoft Valuable Professional