Laptop won't start no-auto repair does not work

Similar Questions

• Cannot start Windows & startup repair does not work!

  I have Windows 7 Home Premium installed on the HP DM4t laptop. My laptop can not restart. I tried using the reapir drive system but it shows some loading filed and I got a black screen with the pointer (arrow). It remains like this for hours and hours (4 to 6 hours), but never get to "System Recovery Options". I'm not able to boot in SafeMode as well. I'm trying to recover the OS using the Factory Reset but ii can't at this point because it won't let me get to "System Recovery Options".

  So far, I've tried repairing the system by clicking on F8, try using System repair Disk, try to use 7 set of DVD disc burn with the image of the system, tried in all cases that I get genuine Windows 7 OS DVD - tell screen load files of windows and that the black screen with the mouse pointer (arrow). I am not able to achieve "the System Restore Options."

  Model number: WD533AV
  Description of the model: HP PAVILION DM4T - 1000 NOTE
  Serial number: [personal information]

  HP Pavilion dm4t Entertainment PC
  • Genuine Windows 7 Home Premium 64-bit
  Dual Core processor • Intel Core i5 - 430 M (2.26 GHz, 3 MB L3 Cache) with Turbo boost up to 2.53 GHz
  • Intel HD Graphics [HDMI, VGA]
  • 4GB DDR3 (2 Dimm system memory

  I tried the break-in for HP Advanced System Diagnostics Test, test

  Memory test - passed

  SMART Check - spent

  DST short - failed

  Failure ID - M0DMVD-55G6KW-XD6U3G-60R703

  Product ID - WD470AV

  Hard drive 1

  Running test - failed

  ----------------------------------------------------------------------------------------------------------

  Memory - test passed

  ----------------------------------------------------------------------------------------------------------

  Hard drive test

  Test Drive: 1

  Smart Check: spent

  DST short: failure

  Failure ID - M0DMVD-55G6KW-XD6U3G-60R703

  Product ID - WD470AV

  ----------------------------------------------------------------------------------------------------------

  Main BIOS HDD test

  Hard drive 1 fast (303)

  Not sure if it of a mistake or not.

  My laptop is almost 2 years old and have no warranty left. Any help will be appreciated.

  According to the information you provided, as shown below;

  Hard drive test

  Test Drive: 1

  Smart Check: spent

  DST short: failure

  Failure ID - M0DMVD-55G6KW-XD6U3G-60R703

  Product ID - WD470AV

  Your hard drive has failed or is about to fail and will need replaced. Based on maintenance and Service of Guide for your LAPTOP of HP PAVILION DM4T - 1000, you will need a 2.5 "SATA with a form factor of 9.5 mm (3/8"). Make sure that you have a set of HP recovery discs for your computer before continuing.

  Please send Bravo

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• Launch Startup Repair does not work

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause Launch Startup Repair does not have to work.  Thanks if someone can advise.

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause the launch startup repair does not work.  Thanks if someone can advise.

  Hello

  It may be damaged.

  If you have problems with the use of the built-in repair software:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• Auto-rotation does not work on my WT8-B-102

  Hello

  I have restored my Tablet WT8B-102 and my auto rotation does not work. I instaled all the drivers and the nohing.

  How can I fix it?

  Hello

  You restored your device with the recovery image?
  I mean do you use your WT with factory settings?

• I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  This is a question which would probably respond by HP support, because it isn't really a Windows problem.

  Are you sure that the touchpad is not just turned off? Many laptops have switches, power switch, so you can rest your palm while typing one is not worry by pressing the key.

  Sometimes, there is a button above the key, a key on the Ko, or some have a stain on the pavement you waiting/tap/double tap/etc. to toggle the pad.

  If not, you could try to go on the site of HP and DOWNLOAD/reinstall assistance the SW for the touch pad.

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• Auto-Sleep does not work then in the lock screen

  As the title says, I set automatic standby after 30 minutes of idle time of the computer, but it only works when I'm on the desktop, if I'm not connected (lock screen), auto sleep does not work, how can I solve this problem?

  Hello

  A power plan is a collection of hardware and system settings (such as the display, sleep, etc.) who manages the way your PC uses power. Lock screen the console after the deadline option must be added to the advanced power settings.

  Change power management and check.

  Power plans: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows/power-plans-FAQ#1TC=Windows-8

• Table, shuffle a part of a table using start and end Index does not work properly

  Hello
  I used a method to mix a part of an array, but I noticed that it does not work very well.
  When I run this method sometimes I empty array values.

  So if you try the example below and test out a few times would get you a good result but sometimes a wrong result.

  
  For example, when I run the present I get in my trace output:

  a, b, c, d, g, e, f (here after the g it won't)

  a, b, c, f, g, d, e (here it goes right)

  a, b, c, d, g, f, e (here I'm not)

  var myArr:Array = ['a', 'b', 'c', ', 'e', 'f', 'g'];

  function shuffle(myArray:Array,_startIndex:int_=_0,_endIndex:int_=_0):Array {}
  if(endIndex == 0) endIndex = myArray.length - 1;
  for (var i: int = endIndex; I > startIndex; i--) {}
  var randomNumber:int = Math.floor (Math.random () * endIndex) + startIndex;
  var tmp: * = myArray [i];
  myArray [i] = myArray [NombrAl];
  myArray [NombrAl] = tmp;
  }
  return myArray;
  }

  trace (shuffle (myArr, 3, 5));

  No one knows where he goes wrong and why nobody on the web discovered this problem previously, because
  When I googled on this topic, I found other methods that also sometimes fail.

  Kind regards
  Chris.

  var myArr:Array = ['a', 'b', 'c', ', 'e', 'f', 'g'];

  function shuffle(myArray:Array,_startIndex:int_=_0,_endIndex:int_=_0):Array {}
  If (endIndex == 0) {}
  endIndex = myArray.length - 1;
  }
  for (var i: int = endIndex; I > = startIndex; i--) {}
  trace (i)
  var randomNumber:int = int (Math.random () * (endIndex + startIndex-1)) + startIndex;

  var tmp: * = myArray [i];
  trace (i, randomNumber)
  myArray [i] = myArray [NombrAl];
  myArray [NombrAl] = tmp;
  }
  return myArray;
  }

  trace (shuffle (myArr, 3, 5));

  There were a few issues going on here.  The first is that you used the index end to the random number, but should be the difference between the beginning and the end.  the second is the > = start index in the loop.  give this a go.

• Auto focus does not work in the creative modes

  I use EOS 600 d for the past three years. I was and I am not able to auto focus in creative modes. I actually thought that there is no installation of the auto focus in creative modes. Only when I attended a workshop in Chennai yesterday, I got to know the automatic update facility is available in creative modes too.  I tried with three lenses and in all cases autofocus does not work in the creative modes only. In basic mode, it works well. I browsed the forum and found to RESET. How a reset should be done? Someone please explain. I can't find any updated firmware for 600 d.

  Thank you, Mr.Waddizzle. I did a reset according to your advice and now AF works in the creative modes also. Thank you.

• "auto play" does not work

  When I try to install a new program in my windows system 7, or when I insert a blank disc to burn music the 'auto play' will not work.  When I opened the computer and right click on the 'E' drive, a window opens and I click on 'Open' and I get another window which asks to me "Please insert a disk".  Can anyone help?

  Activate AutoPlay

  Click on Start/Control Panel/hardware and Sound/AutoPlay
  Select "Change the default settings for the media or deivces"
  There should be a box in the upper left entitled: "Use AutoPlay for all media and devices".
  Place a check in this box and then click on the Save"" button.
  You will also see a long list of options 'media '. two of them are named: blank CD and DVDs.
  You can try the default or set an action from the drop-down list and still "Save" the changes.

  J W Stuart: http://www.pagestart.com

• Auto hide does not work

  My hide does not work.  I uncheck that it and click on apply. I then check it and click on apply, and it disappears momentarily and returns immediately.  Thank you!!

  WAIT!  This works when both auto-hide is selected, and the taskbar is locked!  Thank you!!!

• Why my auto focus does not work like Julieann K does in his tutorial

  I tried to use the auto focus selection, as shown in the tutorial by julianne k and it does not work.

  After reading your response, I realized that my photo file was huge, so I reduced the entire file significantly down for something like 8 x 10 and it worked fine.  My account was just too big. I tired of small files, and the update worked.  the file may not just be very big. I thought that after you suggested I go to 8-bit. Thanks David

• TextArea auto resizing does not work from flex 4.6

  Hello

  before flex 4.6 on air mobile for android, if the height is not specified in a s:TextArea, auto sizing textArea, since flex 4.6 does not work.

  Thank you.

  Try switching it back on the TextAreaSkin instead of the StageTextAreaSkin.   StageText allows you to get a native text input, but there are limits to the way he plays with the rest of the display list.