Laptops stolen - draw MAC addresses

Similar Questions

• WLAN Access Denied for active MAC address in the ACL

  I have a pretty great list ACL (Access Control) and I've never had a problem with it in the past, but I just got a new laptop and same computer when I save the MAC address and reboot the router I always get the "WLAN Access Denied" error for access from your laptop.

  I did all the "sanity checks" to ensure that the password is correct and that other devices still work.

  I had the MAC address of the laptop the same way, I always have, I see the MAC address in the Logs in the access denied message and copy it from there, in the access list. I did it with more than 20 other devices successfully, I'm not sure what is different about this one MAC address... I confirm through ipconfig on the laptop that the MAC address I use is correct.

  When I turn off ACL, I can connect without any problem of the laptop.

  Any thoughts? I am very familiar with computers and you can do an advanced troubleshooting, I do not know infrastructure and networks of the stuff so I don't know where to start here.

  Any ideas on how I can fix this would be appreciated!

  You may have hit a limit of the ACL. A test, remove a device from your list and see if your laptop will connect. This would confirm if you have contributed the most to list ACL on the router...

• Satellite L500-13Z - was stolen and I need MAC address

  How can I find my MAC address in my PC? I have all the documentation and the serial number.

  Help, please.
  THX

  Hello

  I can understand you, buddy but the MAC address isn't listed in the user manual.

  About your stolen laptop, you should contact Toshiba directly. Maybe they can you tell the MAC address of this serial number, but I put t know.

  Here it s only a forum from user to user and you need professional help in this.

• my hp laptopb series dv6 a stolen.i need mac address

  Hello

  my laptop was stolen last week, I went to the police station, but they did not help me I asked my friend how can I find my laptop (series dv6 btw)... He told me to try to get the Mac... because I know that I should go to cmd and ipconfig / all... but I do not have access to my laptop... is there anyway that you can say that I find my mac address and my laptop?

  sick appriciate...

  Hello

  as you said that your laptop is stolen. and you need to address mack of it.

  Well now it's hard to get it... you can contact your support just tell them your serila manufacturer didn't and model of your laptop... and asked for help. and also report the theft of your laptop. Also put a compalaint of police before calling the customer so that you can give refrence of that also.

  you need address Mack Lan and WAN Mack... because your laptop's Lan and wan adapters ethernet integrated.

  second... If you had connected your laptop to any device wifi via Lan or wan port in the networks of your home or office... and then you can find the address mack from your computer to your router. Some routers store the logs inside the router as well as the address of mack, your user name and ip assigned to the laptop computer or router via DHCP.

  Example)

  Apr  6 15:02:10 dnsmasq[1031]: DHCPACK(eth0) 192.168.1.158 00:1d:92:25:xx:xx Jove-P 
  

  ) sound of my router indicating the date, time, ip address, mack and name of computer user...

  If you have connected your laptop in public any office or any wifi zone, then you can ask them on your address mack...

  Also add your serial number mobile no and mack address in your city, State, or national database of auto theft.

  I hope that helps!

• Stolen MacBook. How can I find my mac address?

  Hello

  MY Macbook was stolen along with my air ipad and the iphone 6.

  How can I find my lost my macbook mac address in order to help the police with the case?

  Thanks in advance,

  Florin

  If you find my iPhone/iPad/Mac before they were stolen, use the link below:

  https://www.iCloud.com/#find

  If you are looking for the serial number, it is in the box of the device provided with.

  Or if you have another computer when you synchronize your iPhone/iPad

  computer iTunes > Preferences... > devices > hover your mouse over the backups to see serial number, etc..

• HP Probook s 4540: laptop can be Track with it, s MAC address

  A few days ago, I lost my phone at my University
  Must it be followed by using the MAC address?
  Because I have it, area in which she s MAC address, product no., serial number, etc. are written.
  Thanks in advance

  Hello

  I'm sorry to know that. Yes and no depending on many factors. The side Yes is very low and the side no. is huge:

  New 'user' does not change (or give a fake) or hide it when connect you to the internet.

  New "user" must be on the internet

  Tools ot tool to draw it down, to the right

  ...

  Kind regards.

• WAP54g does not recognize the IP address of my laptop with active Mac filtering

  I have reset my factory default WAP54g v3.05 to allow access to the older computer to my network.

  Now, I reinstalled for better security using my new laptop: no SSID broadcast and WPA2-Personal encryption. However, when I activate the Mac filtering and allow my laptop more recent, the WAP54g does not recognize.

  Disable Mac filtering and my laptop is back on the network.

  Any suggestions to solve this problem would be appreciated.

  Make sure that the MAC address of the wireless network adapter in the MAC address filtering tab. To get the MAC address of the wireless network card. Click on start-> Go to run-> type-> CMD-> Hit Enter type ipconfig/all

  This will give a show you the MAC address for adapter ethernet and a wireless adapter. You must select one for the wireless network adapter.

• Determine the MAC address of the LAN knowing that the model and serial number

  Laptop Toshiba SN 96592614 G

  Is it possible to determine the MAC address of the network card, knowing that the model and the serial number of your laptop?

  How to enter the Toshiba addicts.

  I saw you using Toshiba unit details page with the serial posted Qosmio F30-113 offered in Russia.

  Your laptop is stolen or what?

• G3 EliteBook 840: MAC address

  How can I get the MAC address of my computer when there is no installed operating system and the BIOS F1 setting no longer has that info?

  Impossible to find anywhere in BIOS, any number I press.

  @Submarinerbob

  Look under the sim memory.

  840 G3 laptop HP EliteBook - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=7815294 & MEID = A3AC5BD6-A925-4B7F-ADA6-23767F94BA44

  Watch the video to remove/replace for the memory.

  You will see a sticker with the MAC address.

  REO

• Satellite L750D - MAC address change by itself

  Satellite L750D/L755D 18mths old.
  Restarted this morning after the weekend and cable NIC MAC address has chnaged.

  Started in windows and could see a different value to Friday (as we control access through MAC address and was blocked).
  Started in normal Linux (Ubuntu 12.04) and a different MAC address again.

  NIC seems to work fine with whatever he chooses - but how MAC address can be change by itself?

  > NIC seems to work fine with whatever he chooses - but how MAC address can be change by itself?

  The physical MAC address is not editable, but there are a few ways to spoof the mac address
  For example, using Windows XP, the MAC address can be changed in the properties of the Ethernet adapter. On the Advanced tab, under "MAC address", "Locally administered address", "Ethernet address" or "network address". The name of this option depends on the Lan driver that is installed on your laptop. And important note; not all drivers are supported changing the MAC address of this way.

  In addition the system registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} contains some parameters of the network interface and the option called NetworkAddress will serve to set the MAC address.

  There are also tools that could spoof the address MAC for example, SMAC MAC Address Changer.
  Finally and above all some routers provide an option to change the MAC address.

• Satellite C850D-104 - change of MAC address

  On the new laptop of C850D-104, I have a problem with the mac address.

  Well well, in short: it changes.

  My firewall filter (also) on the mac address so I need to add the mac address of the new machine.
  Which seemed to work fine until I restarted the laptop warm. No possible connection.

  And looking on the firewall, I see indeed a different mac address attempts to connect.
  To be sure, I restarted again, and yet once again, I get a new address (another).

  Restart IE cold. stop and restart seem to reset the address this is a first.
  And after a warm reboot, the new address.

  Now bypass is simple, do a cold reboot, but it is still annoying.
  On the internet I found some versions of back problems with the netword card driver, but my current license is some versions above that should have solved the problem.

  Any suggestions?

  Hello.
  I had the same problem in a C850-154 (with a Realtek wireless adapter) and the pilot was at the beginning of this year.
  I have updated with the driver of the 14/09/12 (version 2.00.0020) and the problem was solved.

• Satellite Pro 6100 - Question on WLAN adapt and mac address

  I bought a second hand of Satellite Pro 6100. It has a WiFi adapter. It is where and how do I know the macadress of the adapter?

  Thank you.

  Hello

  If you are sure that this laptop was equipped with the Wlan card, and then the MAC address can be easily discovered 100%.
  You must start the console with the command: * CMD *.

  Then use the command: * ipconfig/all *.
  This would list all the details on the WLan/LAN cards installed in the laptop.
  The physical address means MAC address ;)

  This should help!

• WGA600N and change the MAC addresses wireless! Grrr!

  The exec summary: why in fire the wireless MAC address changes with each power cycle? It can be stopped?

  The rest of the story: just got my adapter and had problems he connect my Linksys WRT110. Discovered the hard way that the MAC address on the label is the * wired * address, not the wireless MAC address. Has been able to configure the adapter and use the admin software to watch the Mac wireless. I plugged this address into my WRT110 that has the MAC address filtering turned on. Smart card, life was good.

  Unplug the adapter and it moved to its final location. Plugged in, no connection. Received a computer laptop and connected to the card, and this amazed my eyes see but the wireless MAC address has changed with the power cycle! Unplugged the card even once, waited a few minutes, then plugged in. The wireless MAC address verified again and of course, once again changed.  When did it become an acceptable practice?

  It is of course difficult to use the card in an environment with MAC address filtering turned on. Is it possible to prevent this address change?

  Thank you

  Found the answer - the wireless adapter takes the MAC address of the device, it is well plugged. Interesting.

• Disable broadcast SSID and MAC address turn on filtering on WAG320N

  When disabling SSID broadcast and enabling MAC address filtering on WAG320N, my other laptop wireless disconnected.  And when you try to connect, it connects again.

  You can not hide from intruders.

  The router always sends the tag. The router is immediately detected.

  The SSID is always transferred not encrypted. He is always sent over the association. It is easy to force a re-Association. If there is a single device without wire connected to the access point it takes about a second to learn the SSID.

  Disable the SSID requires your wireless devices to search actively for the network. This means that your laptop will always try to connect to your SSID, as long as it is not connected to another network. As sending requires much more power then listen passively it drains your battery.

  And, in fact, if you are in an internet café anyone can learn your SSID in time where you go on the wireless at the moment where you associate with the network of internet café.

  In addition, it causes many problems with different wireless, as instability or similar cards.

  MAC filtering is still more useless that the MAC address is always part of any wireless transmission and it's always clear. It is extremely easy to pick up the allowed MAC addresses, and it is extremely easy to change the MAC address of a wireless card.

  New: use the real security and forget this nickname of security features.

  What you try to do is a waste of time. Of your time. It will slow down any intruder.

  See also

  http://homecommunity.Cisco.com/T5/wireless-routers/iPad-Wi-Fi-MAC-address-quot-not-a-MAC-address-quo...
  http://homecommunity.Cisco.com/T5/wireless-routers/is-my-router-effectively-secured/m-p/333945#M1752...

• "clone mac address".

  WRT64G

  I have a server (2003) and a PC (XP) connected to my router and a laptop (vista) wireless to the router. I connect to my server and PC thru 'mstsc' where I could use two of them through my laptop. Everything was fine until I wanted to go further to access my server via the internet (which I can do w/out for now). I started tweaking the router, and when I fell on the button for "clone Mac address" I from the PC. Now when I want to access my PC and the server I clone my Mac address from my laptop to the router and then I can't get on the internet until I have clone the Mac address to my PC. I guess I should write down Mac address, but I didn't and now I don't know how to get it back. And I guess that's where I went wrong, I'm not sure. Can someone tell me how to get back where I was? Or tell me what I need to use the settings.

  Thank you

  "clone mac address" means the process of duplication of the MAC address of one of the computers on your network to the port on your router Internet (WAN). This is generally only done under circumstances where your service provider equipment external Internet to your network is expected to see a certain MAC address before it will assign a WAN IP address to your equipment.

  What some service providers used to make Internet was set up your internet connection and to register the MAC address that was on the device (usually a PC) that is directly related to their modem (or what they used to provide connectivity to their network). They would configure their network equipment to provide an IP address only if she saw this MAC address of your connection. If you have modified the equipment to connect to the modem, you must call to reset their equipment to account for your new MAC address. Most of the suppliers do no more, but the MAC cloning on the routers address is a way to circumvent the duty to call. If you have installed a router at some point after the original installation of your ISP and your internet connection does not work, you could try cloning your MAC PC address to the internet port of the router, thus deceiving their equipment into thinking that the same PC was still connected to the modem.

  In most cases, MAC address cloning is no longer necessary (despite the recommendations of many here). There are cases where it can work to correct a connection failed, but it is rare.

  There is no reason you need to clone the MAC address of your router, if your internet connection work before you start playing with trying to get RDP (mstsc) access to your devices from the internet. You need just the port to the RDP port on the router... but note that if you want to access these two machines on the internet, they will have to listen on different ports. You can use a registry editing in Windows to change the port used for RDP so that the XP and server box are tuned on unique ports.

  http://support.microsoft.com/kb/306759 - how to change the listening port for remote desktop