LaserJet 4050 - ordinary letter from Tray 1 load

Similar Questions

• HP LASERJET 4050: HP LASERJET 4050 PRINT JOBS WILL NOT PRINT FROM TRAY 2

  I have a HP Laserjet 4050 printer and it won't tank prnt 2.  It prints from the manual feed tray 1.  It does not recognize tray 2 printing, but it will let me know when the tiroir2 is missing.  No idea what this could be or how to fix it?

  Any help would be greatly appreciated.

  Toni

  If you print a configuration page using Tray 1, then you can look and see what paper size and type it thinks are in tray 2.

  You will see probably is one of these elements is bad and most likely it is misdetecting the size of the paper due to a failure of the Board of Directors that detects the position of the fingers on the side of the status bar.

  I think you have probably found a message on the screen that says load paper in Tray 1 whenever you try to print from tray 2, if this is the case it should also allow you to hit the go button and print using any type of paper or the size it considers is in tray 2.

• My pixma mx922 load from tray 2. I get an edit this tray 1 has no paper.

  My pixma mx922 feed of the lower plate. I get an editing tool that the top plate is empty.  I only use the top shelf for photo prints.

  what I am doing wrong?

  Hello.

  The printer will feed from Tray 1 if you selected a smaller paper size before printing.  Check the settings of the printer on your computer to make sure that the letter or A4 is selected before printing paper size.

  If you continue to have difficulties, find more help contact us.

• Printing problems with HP LaserJet 4050 TN

  Hi all

  I have a HP LaserJet 4050 TN and I connected on my desktop Dell (8 64-bit Windows) with a parallel cable / USB (TrendNet 1284).

  When I try to print, nothing happens (eventually I get an error message from Windows 8 on the right that says: "error of HP LaserJet printing...) The printer could not print").

  The printer is on, of course, and it is able to print (for example, test configuration page prints very well).

  From the printer connection, looks like it automatically installed the HP LaserJet 4050 Series PCL 5 driver.  I tried to update and it says that it is up-to-date.

  Any ideas what the problem may be?  Thanks for any help you can provide!

  ----

  Edit

  ----

  Just to add that this printer model seems not support a network connection for the HP site. I try the parallel-usb connection since it seems to be the only option to connect the printer to my computer.

  More that likely the IP you have assigned manually whenever you got the printer. The Jet Direct card is when you connect the ethernet cable into the printer. I have 2 screws in the top and bottom.

  What I would do is a cold reset so your home network could affect its own IP address.

  With the printer off, press the big green button, and then turn on the printer. Wait what he say cold reset on the display, then release the button. Connect your network cable, wait about 1 to 2 minutes for DHCP to assign an IP address and print a configuration page. The second page will show you the IP address.

  Then go to your driver, click on Ports and change the port to a Standard TCP/IP port. If it is not available, then create a new port. Enter the IP address of the printer and print a test page.

• HP LaserJet 4050: HP LaserJet 4050 drivers: image of the printer to the Download Page doesn't look like my printer

  I'm looking for drivers for a HP LaserJet 4050. The image of the printer on this page looks nothing like the printer I have. HP has a mistake? I downloaded the universal print driver from what I found; I sometimes get error messages when I print so I think that I don't have the correct driver. Help is appreciated. Thank you.

  There are a few printer HP LaserJet 4050 Series printers, and you can find the drivers for all the models here.
  
  I hope this helps!
  
  Edit: Wrong link. Try hereand here.

• HP LaserJet 4050: Error printing on HP Laserjet 4050 and 4100 Windows R2 2012

  We have recently migrated our Windows Server 2003 environment to Windows Server R2 2012.  Some of our printers, specifically HP Laserjet 4050 and 4100 no longer work with Server R2 2012, even if we downloaded the drivers for Windows R2 2012 from the Internet HP site and made sure the printer was using the new driver from HP.  When you try to print from the server or terminal connection, we get a "printing error" in the status field in the queue.  We do not know what to do to get these printers to print.  We have several of them and redirect users to print to another printer which is further so they can print.

  Do you have any suggestions?

  Best regards

  Paul

  If you cannot print from the server, then on the server, the parameters must be incorrect.  You can even ping the printers on the server?  Since you have more than 1 printer with this problem I doubt that all the printers hp all wrong.  Something else in the way that you configure these printers must be the issue.  If you can ping and also access the web server, then I think you have problems with active directory.  If you can not ping so perhaps have changed the ip addresses or the road you take these ip address has changed.

• Office Pro 476dw - don't print from Tray 1

  Hello!

  I recently bought a 476dw Office Pro, and it will print from Tray 1 when I select an envelope #10 or legal size paper.  I am trying to print labels with a format sheet letter Tray 1.  I chose precisely the paper as "Tray1" Source, but it will not draw labels and printing from tray 2.  Can you please adivse how I can direct the printer to Tray 1?

  Thank you!

  It is a configuration problem simple set tray.  You must make sure that the sending application fits on the correct document settings work before it hits the printer.  Once the printer receives the job he will review the parameters type and format of the document as well as the tray configurations it has available.  At that point, he will decide to print on a platter or another or ask the user to perform an action so that it can continue.

  Try to print a sample of work such as work from another application.  If the same problem happens then there is a mismatch of the status bar on the printer.  If the problem does not recur from a different application there is a configuration problem on the initial application, which must be found and corrected.

• LaserJet 4050: Laserjet 4050 connecting to the new computer

  I just finished setting to the top of my new desktop computer (Maj MainGear - very nice!).  I started to connect my LaserJet 4050 via its cable parallel (IEEE-1284) to see that my new computer does not seem to have this port.  She seems to have only USB ports.  Any suggestions?   Is there a parallel to USB adapter?

  Yes, there is such an adapter but your biggest problem will be drivers for the printer work with current versions of Windows. Computers have no parallel ports for quite a while. This is the cable of the adapter that I used with my Laserjet 4050:

  

  You must use the "Universal" printer driver and it strips away any sort of advanced features, but don't let not the printer works at a basic level:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=20301&swLangOid=8&swEnvOid=4158

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Hello! Why is your product shows a letter from our service as a fraud? How to solve it?

  Hello! Why is your product shows a letter from our service as a fraud? How to solve it?

  Your message contains links to streamwood.ru as does your Internet site?

  Links to other sites often trigger detection Thunderbird scam.

• Attached to a letter from Apple is not read by windows computer

  Attached to a letter from Apple is not read by windows computer.  No current attachment.

  If you plan to support, you must provide much more information. Tell us exactly what you are doing and what is happening, including at the receiving end.

• If someone checks the mail from yahoo to my computer, their code is displayed if the first letter from my ID is the same with theirs. How can I delete their history on my computer?

  If someone checks the mail from yahoo to my computer, their code is displayed if the first letter from my ID is the same with theirs. How can I delete their history on my computer?

  Hey ioanaatc,

  Go in Tools > Options > Security tab click on passwords saved. This will give you a list of sites that you have saved passwords yahoo just find and delete other connections

  There are a lot of useful information in this article on the Firefox Password Manager. He should answer any other questions you might have.

  It can be saved as Auto form fill data. If this is the case, the article I just linked will show you you how to remove these entries as well.

  Hope this helps!

• Newly installed T60 suffers from a heavy load of CPU (interruptions)

  Hi all. Due to problems with my windows, I had to reinstall my T60 2007-FVG. I installed Vista, SP1, update system with all the drivers, update BIOS etc. The problem is now, I suffer from high CPU load often enough (Process Explorer who reports it as disruptions), each time for a period of time only. This makes his stuttering and slows down the mouse cursor. I tried reinstalling the drivers Intel INF, its pilots.

  I'm desperate.

  Thanks for any advice, Ales

  I think I got it. It is caused by the search for wifi. When wireless is enabled, but no network not connected, it checks for networks every few minutes and this is the cause. I don't know what is the problem, but the solution is simple - turn off the wifi when you use do not.

• LaserJet 4050, low message "Toner".

  Hello

  After several years of printing, I finally had to replace the cartridge in my LaserJet 4050.  The new cartridge is a genuine HP, but after installing I can not print.

  The printer was purchased second hand and since I got it it has always displayed a low 'Toner' message in the dialogue of impression, BUT NEVER ON the PRINTER LED.

  The irony is that the old print cartridge is a compatible generic and replacement is a genuine HP.

  Any help appreciated.

  Kind regards

  Gary

  This is so embarrassing!  I found the seal on the new cartridge, removed it and everything works now.  Leave it on the forum just in case others have the same problem.

  Oh by the way, despite setting up a whole new cartridge HP, the print dialog still warns of low toner level.

• Driver printer HP LaserJet 4050 T problem

  I wonder if my cable is bad.  It is properly installed and connected correctly, but the computer and the printer are not communicating

  Printer drivers for the printer HP LaserJet 4050 T. says it is ready, but the jobs piling up and will not print. I was wondering if my cable is bad. It is properly installed and connected correctly, but the computer and the printer do not seem communicating__

  Try to uninstall/reinstall your printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=18320&TaskID=135&prodTypeId=18972&prodSeriesId=25475&submit.y=4&submit.x=11&lang=en&cc=us

  The drivers are available at the link above.

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&submit.y=7&submit.x=6&lang=en&cc=us

  Go to the above link > 'See support and troubleshooting information' > key in your number of printer > there is the use of manuals there.

  For more information, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• M600 series printers LaserJet Enterprise (601) with custom tray (cb527a)

  I have a custom of paper (4.13 "x 8.5") piece that allows to print fine from Tray 1.

  I bought custom support tray (cb527a) because the data sheet says it can print dimensions of 102 ~ 105 mm to 170 mm to 140 mm to 282 mm.

  I succumbed in a sheet 4.13 "x 8.5" feel of this custom tray (tray 2).  The printer is confused when I put in place the guides in the positions for this odd size (it is in portrait, not different from Tray 1 mode). He seems to think that the sizing is 6.69 "x article 11.1".

  This custom media tray can take all kinds of sizes ISO and the currents ranging from 3 x 5 to 5 x 8 card formats... It seems especially excessive zeal for a product labeled as 'company' in order to avoid paper sizes custom when the dimensions are within its range of specifications...

  If you have this job, it would be a great help if you can lend your expertise to me.   I tried to configure the status bar of the console device and through the administration of the web... the HP Universal PS driver doesn't seem to offer any help either...

  .. I found the answer...

  Unfortunately, the manual (HP doc: c02677203) has crushed my dreams on the 73/74 Page.

  Short version, it is not possible to print my document 4.25 "x 8.5" via media in tray 2 tray.  The minimum size for tray 2 is 5.83 "x 8,27".  So very disappointed for a product labeled as "business".