Set up a dial for Laserjet M1212nf group fax?

Similar Questions

• Setting up the VPN for ACS5.5 group

  I'm trying a group in the ACS5.5 which allows users to connect. I created a network called ASA - VPN group and he put in ray and Ganymede. The ACS is linked to AD. I am lost on what to do next as rules of extreme ass or attributes. I do business with ISE before but not of GBA.

  Take a look at the following link as it describes a step-by-step process:

  https://supportforums.Cisco.com/document/139141/remote-access-VPN-authentication-ACS-5x-using-RADIUS-protocol

  Let us know if you still have any questions.

  Thank you for evaluating useful messages!

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• LaserJet m1212nf MFP not recognized by OSX 10.6.6 for scanning

  
  

  There are several ways to support a scanner on Mac OS X.

  One is to provide all of your own software, which is what we usually have in the past and did with the printer in question. You can also provide an ICA driver that allows him to work with the Image Capture, preview and other Mac OS X software. We have recently begun to provide these drivers, but not for the M1212nf at this time.

  Support of ICA will certainly to be considered for all future devices that release us, but so far there are a lot of devices that do not have this support.  The m1212nf model mentioned in this thread is not on our current list of ICA devices supported.

• Print driver error with HP LaserJet M1212nf Professional on Terminal Server in Windows 2008 (32-bit)

  We got a lot of printers LaserJet m1212nf installed the SAME version of the driver on the server and desktop computers and nothing is printed using Easy Print. No errors, no message, but nothing is printed, only when a test page is printed the server will display a warning: "no test page cannot be printed.

  After that, we try to use the HP instead of the TS Easy Print driver, forcing group policy first use the Hp driver. But the terminal server server always use the easy print driver so we are in the same way.

  If we try something else... THE PILOT XPS... but it works on the desktop PC, we try to print a test page in office printer properties, but "no test page cannot be printed" is shown... my God!

  WHAT CAN WE DO?

  Hello

  Thanks for the post.  I have included a few links below, one to a document and the other to a software download.  If everything goes well between these two, we should be able to get this installed and get up and running.  Good luck!

  http://support.HP.com/us-en/document/c01998962

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-81123-2&cc=us&DLC=en&LC=en&OS=4022&product=3965849&sw_lang=

• AirPrint from a PC to a LaserJet M1212nf multifunction printer?

  Hello!

  I have a HP LaserJet M1212nf MFP and connected to the network via Ethernet and was delighted when I saw that I could Airprint (wireless) in all 3 iPhones and the iPad in the family!

  I wasn't very happy when my 3 windows printers only ePrint using docs attached to emails and then only certain formats.   I expect this lack of functionality of a specific printer Apple, but not a HP printer!

  Through Googleing I saw what I thought, this was the answer: to trick my PC into thinking it can print (wireless) to an airprinter (LaserJet M1212nf) through the network, but nothing panned as being...

  HP has really disappointed this time around.  Any suggestions?

  Thanks in advance
  Joe

  The recommendation is how I'm set up...

  I think I solved it however.

  I had installed the original with a USB cable drivers, and when I disconnected, I looked for changes in configurations in print wireless driver, I even reinstalled the drive locally to nothing does not.

  When I used the URL of the server web printer and installed the driver via the web server it installed the software again, but much smaller this time 50 MB vs. 200 MB, this newly installed printer will be printed as a network of all my apps windows printer.  He is represented by a different icon that suggests that there is not all the features of the inslalled USB driver, as analysis.

  Every thing about this installation, of setting up ePrint, to solve this problem with the PC printing has been a nightmare.  HP really left the ball on the documentation understandable as far as I'm concerned.

  Thanks for your help. :-)

• LaserJet M1212nf: HP LaserJet M1212nf will not print, claims paper jam

  My LaserJet M1212nf do not print, and it has never printed. Whenever I have create a print job if printing from a PC, copy something via the scanner, or print a report in the menu, it goes through the following:

  1. Initializes the printer,
  2. During initialization, printer pulls in a piece of paper in the tray,
  3. Paper stops halfway in (seems to me like he already spent fuser, then probably would not print correctly in all cases), then the printer claims there is a paper jam.

  Note, this printer has never properly printed a single page. The number of impressions is zero (0). I've never had a paper jam.

  Note that regards the position of the paper as it is pulled into the printer, I use letter size paper, and the printer menu shows that it has set up to accept size stationery. I confirmed duplicate by checking through the web interface of the printer as well.

  Any help?

  And CV: If I can't get this problem solved, I'll have no value outside of this all-in-one at all. It will have been a large lemon and probably will poison any possibility to buy HP products in the future, including those based on the experience of support I've had so far, which has been zero. I tried to get the official support of the guarantee, but despite me documented proof of purchase, my warranty has been backdated to a until I bought itand now I can not contact technical support via the Web site options. I put in another conflict guaranteed, but on the basis of the likely response time will not get an answer until after a guaranteed year is officially over.

  Gary Dee
  wiseintro.co/deeabson

  Hey @Dee76,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions. Please see the HP Privacy Statement.

• LaserJet M1212nf MFP prints on labels

  My Laserjet M1212nf MFP will not be printed on the labels. Select 'labels' as the paper type, I get the large popup telling me to load support.

  I use Avery 5160 labels

  I can print the same labels on plain paper without problem.

  Hi Michel,.

  When the printer is set to the current settings and receives a request for the written press which is not currently installed and configured in the printer, it will prompt you can load the media is requested to print on.

  According to the description, it seems that the printer has not said the type of media that is loaded in the tray.   When he thinks that the driver you select labels, the printer itself, it commissioned from plain and requests that you load the labels.

  The following is a section of the User Guide. On Page 57 there are instructions to change the setting from the default document type.  If this setting is changed to 'Labels' and 'Labels' request from the driver, you should not get the prompt on the control panel again.

  

  Please try this and see if the prompt disappears.

• LaserJet M1212nf MFP: Spring / roll jumped out of scanner flat.

  I had a paper jam while I was scanning several sheets in the feeder.  I opened the lid of the scanner and a spring / roll came out.  I am still able to print and scan from the tray, but I'm not able to use the charger.  I have attached a photo of the piece that jumped.  Anyone know where it's going?  Thanks in advance.

  

  Hi @deejaygreg,

  Welcome to the HP Forums!

  I see that a roll of spring/jump our of your HP Laserjet M1212nf MFP printer. I'm happy to help you!

  The only suggestion I have for you is to please contact HPtelephone support for further assistance. To repair the printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP Laserjet M1212nf MFP professional

  I have a HP Professional laserjet M1212nf MFP. my computer is connected to the network and my printer eprint as well. I am trying to open my eprint printer Hp web services but it does not open, but it is re - lead me www.hpeprintcenter.com.

  Please how can I activate my eprint printer HP web services?

  Thank you

  I await your response.

  Hi philip24,

  Welcome to the Forums of HP's Support.  I understand that you get redirected to HP ePrintCenter trying to enable web services for your Laserjet M1212nf printer.

  Your post leads me to believe that your printer needs a firmware update, so I've included the document Getting the latest Firmware and updates to the product .

  Once the printer firmware is up-to-date, you should be able to get operational web services. If this isn't the case, please let me know at what stage things are ugly and the content of any error message.  Also would you please let me know which operating system you use on your computer (whatsmyos.com)?  Thank you.

• Ink cartridge Laserjet M1212nf MFP and I get error message "install black cartridge.

  I have installed and reinstalled the ink cartridge black for my Laserjet M1212nf MFP and I get error message "install the black print cartridge.  I pointed out quite in the restart including manual online, the fact to unplug printer, etc..

  Help, please.

  This error of "Install black cartridge" is usually caused by a piece of packaging material that remains on the cartridge. The document below should help you to solve the problem. If this does not work, try to do a hard reset. If neither works, let me know.

  Toner blinking or 'Install black print cartridge' Message is displayed on the control panel:
  http://goo.GL/Nlqpg

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Problem with scanning with Laserjet M1212nf all-in-one printer network

  I installed the drivers for my Laserjet M1212nf connected on my computer laptop 64 bit of Windows 7, but it seems like just a printer (in devices and printers). I can't scan from the laptop (I get the error "no TWAIN Device Installed").

  The figure (and work) scan function if I connect to the printer via the USB port and install these drivers, but my laptop does not usually reside in the same room as the printer.

  The scan function installs and runs correctly on a Windows XP desktop computer also connected to my network.

  Hi CW_Enloe

  I will try this tool

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/en/HHO/IPG/easy_wireless/network_diag/&lang=en&softwareitem=MP-96434-1

  If that doesn't help not please inlcude the model of the router you use (be sure that the router is running the latest firmware) which can help was good.

  It can be useful;

  RobertoR

• HP laserjet m1212nf mfp printer: HP laserjet m1212nf mfp printing issue

  Hello world

  I have a strange problem with my HP laserjet m1212nf mfp printer after updating to Windows 10 on PC1

  Updates are made, tried to reinstall ect.

  Now, when I tried to print it says required attantion

  But if something is that on PC1 and I decided to print from another pc and any operating system then Quebec on the prints of PC1.

  Any idea what could be the problem?

  I also ran problem solver and Diagnostics for windows 10 and HP (doctors ' something tool ') cant remember the name

  Help, please!

  Thanks for the help everyone, I managed to solve the problem.

  The soluction (Windows 10)

  Uninstalled the printer one again, then when you search for printers I chose that the printer was not on the list (although is has)

  Installed by using the IP address of the printer, after that, it will ask if you want to keep the driver or replace by the network (that) printer and success problem printing free driver

  In the future no update new printer

• Help! LaserJet M1212nf MFP

  Hey.

  I have HP LaserJet M1212nf MFP AllInOne baought ricently.

  when im trying to scan, if its with the charger or glass, is comeout as Mirrowview page scanned.

  when im asking him to pruduce as a MirrorView is just won't come out.

  I have updated and softwere of hp.

  im a 32-bit Windows 7 user.

  you have a solotion for this problem?

  Hello

  It is a software problem known with the alignment from right to the left of the preview of the scan, it only affects the preview screen , but the analysis results will be as expected.

  Once the mirror preview appears. do not duplicate the preview but complement the analytical work... the results of the analysis will be as expected.

  To completely resolve the problem, you can uninstall the HP software, change your PC Non-Unicode affecting English and reinstall the HP software. Then the HP software will appear as English and not to see him get an overview of the analysis as a mirror image.

  Shlomi

• Wrong Page number, printing on LaserJet M1212nf MFP

  I recently bought a LaserJet M1212nf MFP. My computer running Windows 7.

  I am trying to print a document in Word that displays the page number and the number of pages at the bottom of the page (Page 1 of 3, Page 2/3, Page 3/3), that the document on the screen has the correct page numbers and the number of pages on each page. But on the printed document, page numbers read Page 1 of 1, Page 2, Page 3/3 2. How can I fix this so that it prints correctly? Thanks for your help!

  I hear what you're saying now.

  Okay, so I went in the Word doc and the field code displays page numbers as "Page [PAGE] of [NBPAGES]." I noticed the field shading has been defined "when selected", so I changed that to "always." I printed a document and the page numbers now correctly read!

  Thank you dansdaduk to direct me to the fix.