LaserJet M1522nf does not work in Windows 8.1

Similar Questions

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• HP laserjet pro p1102w: hp laserjet pro p1102w does not work on windows 10 - printer needs attention

  I installed Windows 10 on my HP PavilionX2 about two weeks ago and after a lot of false starts but I finally going.  I set up my printer HP Laserjet Pro 1102w associated with the installation of HP application and got new drivers, etc.  The installation was successful.  When I tried to print.  I received the message that my printer requires attention. I use generic cartridges, which seems to be contributing to the problem.  However, I discovered that the printer would be finally print everything I sent him a few hours later.  So, every time I want to print I just ignore the message about needing to care, but I have to wait several hours before Windows 10 finally released the document for printing. I have no problems whether in point 8.1 of Windows.  It is new with Windows 10.

  My printer works on three of my Windows 7 computers and on three of my computers windows 8.1 and on my iPad, so there is no truth to the message that the printer requires attention.  The printer works fine, but it does not work in Windows 10.  Microsoft Community is no help.  I reinstalled the drivers at least three times using the HP Setup utility. It was worthless.

  Is it possible to fix this?

  Hi @technickel5,

  I see that you are having problems printing just the Windows 10 computer, the print job prints a few hours later after sending it. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would cycle power to the router, restart the computer and the printer to see if it will help.

  It can be assigned to the printer port. Devices and printers, right click on the printer and left click on printer properties, select the Ports tab and see if the printer is checked on TCP/IP and no WSD. Let me know how it is listed.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  Here is a list that the PSDR check on the computer.

  

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know. Thank you.

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Touch screen does not work in Windows XP - Portege 3505

  Hey

  Anyone know why the touch screen on my portege 3505 does not work in windows xp?

  A lot of cheers

  Steve

  and no one knows what you have done or installed on your laptop?

  Sorry about that, but who need to know that? Have you changed something on your laptop >
  Did you install a new OS? Have you used the Toshiba recovery image?

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• Bluetooth does not work on Windows in Satellite C660-A047

  Hello everyone,

  I have a problem with my laptop (satellite c660-A047) Bluetooth does not work on windows (7 and 8), but it works very well under Linux (Ubuntu, Fedora, Backtrack).

  I have an outgoing method :) to do run on windows, start Linux Live then set the Bluetooth adapter to the off State, and then reboot (do not stop, restart only), and then start windows this time this Bluetooth adapter works great and updated automatically in the Device Manager.

  To use Bluetooth on windows I have to do the same steps: (.)

  If someone wants to know all the details to help me solve these curious case, I will be grateful.

  Thanks, looking forward to hearing from you soon.

  The laptop supports Wlan Atheros / module combo BT.
  This means that a single module shares WiFi and BT connectivity.

  Using Win 7 you must add the additional drivers called filter for driver Atheros BT package.
  So first the Atheros WLan driver must be installed, secondly Atheros BT filter after battery Toshiba BT.

  To help to win 8, you must install two components of driver manually to enable the Bluetooth feature: System Toshiba + Atheros Bluetooth driver driver filter
  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• Qosmio F50-126 - Subwoofer does not work in Windows 7

  My subwoofer does not work in Windows 7.
  I installed the audio driver Dolby Digital... Basically controls the bass.

  That didn't activate it because I don't think the pulse of air, that I used to get under Vista. What driver am I missin?

  I don't have this model laptop but it will be interesting to know if you have that you compared the sound settings in Vista and Win7?
  Can you change anything to make box works properly?

  AFAIK there is no special driver for subwoofer features.

• 2 magic the fn key keyboard does not work (PC windows 7), so I can't exhaust remove fn, fn, fn low... and so on...

  2 magic keyboard fn key does not work (PC windows 7), so I can't use Up, fn, fn + DEL, fn + down... and so on...

  Assuming that 'Boot Camp', correct?

  Search here > https://www.google.com/search?q=magic + keyboard + 2 + windows + on + a + mac + boot + camp + site: apple.com...

• Rich Textbox example does not work in Windows 7

  In the past, I use the example of the Rich Textbox (\samples\userint\activex\richTextxbox.prj) in Windows XP (CVI 2010 SP1).

  Now, I noticed that this example does not work in Windows 7 64 bit because the ActiveX is not registered on the system (see error.jpg).

  This control is not installed by CVI IDE itself?

  How can I get this example to work on my Win 7 64 bit machine?

  Hey Vix

  It seems that the Rich Textbox control component provided by one of the VB Runtime is more included by default with Windows 7.

  I was able to manually record using Regsvr32 ActiveX control as described in the following Microsoft KB.

  I managed to download the ActiveX control needed here and there, you must copy the .ocx for the ActiveX control in your C:\Windows\SysWOW64 directory. Open an administrator command prompt and run "REGSVR32 RICHTX32. OCX'.

  SysWOW64 is the "Windows on Windows" emulation directory which is used for the execution of 32-bit controls in a 64-bit environment.

  I realize this isn't the best solution by making the deployment of applications a little more complicated, another solution would be to use another control ActiveX RTF like the one here: http://www.lebans.com/richtext.htm.

  Thank you

• HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

  Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

  Hello

  Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
     
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.