LaserJet MFP M177fw Pro: M177fw can scan over the network

Similar Questions

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• HP ENVY 4520: HP Envy 4520 - refusing to Scan over the network

  Hello

  We currently have a HP Envy 4520, which print, however don't scan or copy over the network.

  I have downloaded and run the HP doctor tool, but it crashes to Windows Image Acquisition (WIA). This article has been read a few topics here, I restarted the following three services:

  1. Remote procedure call (RPC)
  2. Shell Hardwarew
  3. Windows Image Acquisition (WIA)

  Once I finished at the outset what precedes, the scanner worked as expected. However after a reboot - the problem is more severe. The doctor program crashes at the same section and restart services fail to achieve something.

  All software and drivers are up-to-date by using what has been provided on the HP website.

  The error messages vary as well, for example Adobe, I see "fatal error. Commissioning stopped. "

  Hi @DocCottle

  Thanks for your response!

  I managed to solve the problem. After you reset the windows service, you must then make sure that the printer restarts too! I didn't do that. Once done all is well!

• HP LaserJet MFP M127fw Pro: How can I set a password for my printer?

  Hello

  I managed to set up my new HP LaserJet printer. It is connected to our wireless network.

  I would like to put a password so that only those with the password can access the printer.

  How can I do? I'm not very good with tips and computer network.

  Thank you.

  Download the manual here.  The user's Guide.

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-MFP-M127-series/5396666/model/5303419/manuals

  Read how to have an admin password.

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• LasetJet Pro M475dn: Impossible to scan over the network after upgrade to El Capitan

  After that I upgraded to El Capitan I no longer use HP Scan or HP Easy Scan to scan the network more. I can print to the printer, but analysis always results in the page being pulled by the document feeder, but applications just to lock-up without the document showing. Everything worked fine on Yosemite.

  I found a workaround solution that once worked before after a update of Mac OS X (but had to change the name of file, much like the original file has disappeared). Just download the next file on HP (no matter that it is not for your printer; it's not mine either (OfficeJet Pro L7680) but it works).
  
  FTP://FTP.HP.com/pub//softlib/software12/COL51752/OJ-125213-3/HP-inkjet-SW-OSX-Mavericks_v12.34.37.dmg
  
  Disable SIP for this installation and when you run the installation program (do not know if you need to do, but I did anyway). To do this, the instructions are here:
  
  https://forums.developer.Apple.com/thread/3981
  
  When you run the Setup program, make sure you hold the CTRL key when you right-click on it, then click Open in the menu.
  
  Run the Setup program. Be sure to select the HP scanning software and install it. When you get to the configuration of the printer, just skip this step (unless you are using the printer in question). The parser components are what you really want from the printer drivers are already in El Capitan, if you have a HP supported printer. The scanning software will have already installed to the moment you arrive at this screen.
  
  Install the HP Easy Scan on the App Store app (if you get the latest version of the software your front-end). You should be able to run the scanner and scans without restart. I don't know if it will work for everyone, but certainly, it worked for me and keep me until they find what went wrong in El Capitan to disable scanning and scanning capabilities.
  
  SIP turn on again so that your Mac is better protected. We should all work after that. After doing the above, I found that I was able to not only use the HP software, I was able to use Image Capture, preview, etc, to get images from the scanner. Your mileage may vary, but if all goes well it will work again for you all.

• LaserJet MFP M177fw Pro: Pro LaserJet MFP M177fw can't print in color

  I recently bought a new printer and decided to go for the color option. I am wanting to set up so it appears only in black because I only print in color occasionally! I've changed all the settings that I can see and put them in black and white, but always through a program called bistrack, which he still print in color! I've even increased the low threshold of are color cartridges and said to the printer to print in black when the threshold is reached... but still, it prints in color through a program.

  PLEASE HELP SOMEONE!

  Hey @robertsinclair,

  Welcome to the Forums of HP Support!

  I understand that you have problems with printing in black only from your printer Laserjet M177fw range when you use Bistrack. The printer works properly black from other programs, the problem is with Bistrack. I suggest you contact their support solve your problem.

  Either way, I'll mention that the printer still uses a little color when printing in black as a base to give your impressions the sharp looking you would expect from a Laserjet. If the printer gives you a warning that you are very low on a color toner, replace it. This time will keep your bright impressions and will prevent the printer to get damaged.

  Please let me know if this resolves your problems or if you go to a resolution. If you do, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP LaserJet MFP M521dw Pro: Black object hanging in the tray paper LSJ M521 Pro

  Hello

  In my printer, when you remove the paper tray, it seems to be a black object/lever hanging down in the status bar. I have attached two images, where the object is marked with a red circle. I would like to know if it's supposed to be there or not.

  Currently, no problem with the A4 paper format, but the errors with the other formats.

  Thanks in advance, let me know if you need more information.

  Kind regards

  Martijn

  Yes - which is supposed to be there. It's the flag sensor that allows the printer to paper in the tray lift at the right height so that it can be picked up and powered by the rolls.

• Print for Laserjet 1020 hosted by XP 32 bits over the network to Windows 7 64 bit

  I have a Laserjet 1020 USB, connected to a system running XP SP3. I need to print to it from a laptop running Windows 7 64-bit via my home network. Only driver Win 7 64 bit that I could find was for USB direct connect.

  Is there another combination of software that allow the ability to print network that I need?

  Follow these steps: on the machine Windows 7, download and run the Laserjet 1020 driver from here HP site.  When the installer comes to point of asking to connect through the USB port, and then click Cancel.

  Now go to the folder, devices and printers, add printer, a local printer, create a port, port Local, next, \\xpcomputer\printername (with the names of appropriate to share the printer and the computer XP sharing), then choose the Laserjet 1020.

• Laser Jet MFP M125nw Pro: Add a printer to the network WPS button

  
  

  Hello

  Do you have any computer? Pop the CD on your computer and start the installation. 10 minutes or more and the work to be done.

  Kind regards.

• scan to email on Color LaserJet MFP M177fw Pro

  I'm trying to download the printable 'Scan to Email' on my Color LaserJet MFP M177fw Pro, but he continues to throw an error?

  When I bought the printer (yesterday), I was told that I could put up to Scan in a document and have it automatically send as an e-mail message to a recipient.  How to achieve this?

  Thank you!

  Hi grahammccarthy,

  Welcome to the HP Support forums.  I understand that you want to know how to scan to email using your printer Laserjet Pro MFP M177fw.

  You don't mention the operating system that you use, so I've included links to all the operating systems supported on the way to analyze.  There is a section called "How to scan with HP software" and there you can find a subsection entitled "How to scan to email.  It is in the subsection, you will find the instructions you need to follow to be able to scan to email.

  How to perform a scan: Windows XP

  How to perform a scan: Windows Vista

  How to perform a scan: Windows 7

  How to perform a scan: Windows 8

  How to perform a scan: OS X v10.8

  How to perform a scan: OS X v10.9

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Color LaserJet MFP M177FW Pro: 126 a Toner can be used with Color LaserJet Pro MFP M177FW?

  I recently bought a Color LaserJet MFP M177FW Pro and still have 126 a toner cartridges (magenta, cyan and yellow) for my LaserJet MFP M175 precedent. I can use them rather than the cartridges of 130a recommended?

  Hello

  Only 3 printers can use HP 126 has:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=4148379#! tab = compatible_hosts

  Kind regards.

• Color LaserJet MFP M177fw Pro: Color LaserJet MFP M177fw Pro

  I have Color LaserJet MFP M177fw Pro and it is stuck on print fax. I restart the printer and print the fax even. I found a post and supposed to go ware closes so I did. Printer is returned to normal. Got another fax and the printer to print fax. I tried firmware ubgrade once again without help. Toolbox program HP device says 'Printing Fax Page 1'

  Also I can't receive any new faxes and print to the device.

  Hi @DDTKS.

  Welcome to the FOrums of HP's Support. I understand that your Laserjet M177fw is stuck to print a fax. I would like to help.

  I sent you the steps to perform initialization of the NVRAM via private message.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this posthas instructions.

• LaserJet MFP M127fw Pro: Easy Scan

  Hello

  I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and the program title bar is grey. Clicking on it will make the menus work and I can see the name of material, but even to open a new session of analysis does not show the real program window.

  Appreciate any help.

  Thank you very much

  I'm responding to and mark my own post as solved.

  The solution was simple and as always, was not a problem with the system as much as the operator...

  Somehow the corresponding window opened onto a second screen-deleting now. So I couldn't see it. Muppet.

  See you soon

  Stig