LaserJet MFP M830 flow: Is it possible to set up an automatic backup?

Similar Questions

• HP LaserJet Enterprise M830 flow - technical Referance software?

  Hello

  Someone at - it a link to the technical Referance software for this printer model?  I can't find one in the usual places manual online.  Maybe HP isn't what makes them more, and renamed them as something else?

  The content I really need would be called the control panel of the paper Source.  It defines what attributes and values must be added to an application (legacy) so that it can send print jobs to a specific status bar.  Each order is different for the different types of printer drivers.

  I think that the files that you want to PostScript files .ppd ; they will probably contain information such as:

  *%-----------------------------------------------------------------------------------
  *% Media Input Source
  *%-----------------------------------------------------------------------------------
  *OpenUI *InputSlot/Paper Source: PickOne
  *OrderDependency: 50 AnySetup *InputSlot
  *DefaultInputSlot: Auto
  *InputSlot Auto/Printer Auto Select: "
      <> setpagedevice"
  *InputSlot ManualFeed/Manual Feed in Tray 1: "<> setpagedevice"
  *InputSlot Tray1/Tray 1: "<> setpagedevice"
  *InputSlot Tray2/Tray 2: "<> setpagedevice"
  *InputSlot Tray3/Tray 3: "<> setpagedevice"
  *InputSlot Tray4/Tray 4: "<> setpagedevice"
  *InputSlot Tray5/Tray 5: "<> setpagedevice"
  *InputSlot Tray6/Tray 6: "<> setpagedevice"
  *InputSlot Tray7/Tray 7: "<> setpagedevice"
  *InputSlot Tray8/Tray 8: "<> setpagedevice"
  *InputSlot Tray9/Tray 9: "<> setpagedevice"
  *InputSlot TrayExt1/Ex Tray (MP5): "<> setpagedevice"
  *InputSlot TrayExt2/Ex Tray (MP6): "<> setpagedevice"
  *InputSlot TrayExt3/Ex Tray (MP7): "<> setpagedevice"
  *InputSlot TrayExt4/Ex Tray (MP8): "<> setpagedevice"
  *InputSlot TrayExt5/Ex Tray (MP9): "<> setpagedevice"
  *InputSlot TrayExt6/Ex Tray (MP10): "<> setpagedevice"
  *% EnvFeeder is always the 2nd-to-last InputSlot
  *InputSlot EnvFeed/Envelope Feeder: "<> setpagedevice"
  *?InputSlot: "
   save
     [(Tray2) (Tray3) (EnvFeed) (Tray1) (Tray4) (Tray5) (Tray6) (Tray7) (Tray8) (Tray9) (TrayExt1) (TrayExt2) (TrayExt3) (TrayExt4) (TrayExt5) (TrayExt6) (Unknown)]
     statusdict /papertray get exec
     {get exec} stopped { pop pop (Unknown) } if =
     currentpagedevice /InputAttributes get dup
     /Priority get 0 get get /MediaType get = flush
   restore
  "
  *End
  *CloseUI: *InputSlot
  

  Although the way you interpret that to be able to use it within your system, I don't know (I'm not too familiar with the PostScript Page Description Language).

• HP Color Laserjet M277dw MFP: Cannot scan HP Color Laserjet MFP M277dw on Mac OS 10.6

  Hello, I can not scan to network drive using the above mentioned printer. Scan to USB key is possible.

  I downloaded the update (version 20160331) firmware image, but impossible to install the program. After double click, nothing happens. Any ideas?

  Thank you and best regards

  Christoph

  Hi Christoph,

  The printer is not compatible with Snow Leopard, it is supported on Lion (10.7) or later versions.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-Pro-MFP-M277-series/7089945/model/7089949/document/c04515051/

  The update of the firmware utilitywas not desinged for your operating system and therefore does not work on it.

  As the connectewd printer to a network, follow these steps to update firmware directly from the menu of the printer:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04517106/

  If the implementation of scan to a shared folder on your grave down Mac, please specify the exact error, and the parameters used (path of the shared folder used, etc.) also well done you have shared this folder your Mac form?

• P6-2371: my HP laserjet mfp 1212 will not scan after moving to windows 8 10

  I have a windows HP laserjet mfp 1212 electrician network connected to my desktop HP i5 (p6-2371).  Since the upgrade to windows 10 8, although I can print and photocopy I can no longer scan.   I reinstalled the drivers from HP, the pint of HP and a Scan doctor, nothing helps.   The doctor Print & Scan detects the device but says it can not communicate with him.  I also have a Kodak AiO installed as a USB device that scans is more well that it prints.

  Your help please

  Hi @ptpk,

  Thanks for getting back to me.

  The firmware is very important to update.

  You can try to update the firmware from another computer?

  • Try using a USB connection.

  It is possible that the driver was corrupt, so we will need to remove it and reinstall.

  Please follow the steps described in this guide, HP printers - printer problems after upgrade to Windows 10.

  If the problem persists, follow these steps to see if you can solve the problem.

  Let's start by cleaning up your computer.

  • Cleaning disc in Windows 10
  • Perform the clean boot in Windows 10 / 8 / 7
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Uninstall and reinstall the HP software.

  If you use a USB connection between your computer and the printer please unplug this cable now.

  Step 1: Remove the printer:

  We want a clean slate to install your printer on the computer Windows 10. So, I'll have you ensure no trace of your HP LaserJet. displays currently installed on your computer.

   

  1. click on the Start button

   

  

   

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and look for your HP LaserJet. If you see your HP LaserJet listed, click on it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

   

  8 click on devices and printers to launch the window.

   

  

   

  9. in devices and printers are looking for your HP Deskjet. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP LaserJet exceeds showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

   

  

   

  11. click on the drivers tab

  12. look for your HP Deskjet printer driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

   

  Step 2: Install the device:

  1. Please click here to download the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect

  Once installation is complete, please try printing and scanning.

  Source published by my colleague X-23.

  If the problem persists, you can try the solution proposed in the thread below.

  (1) open the command prompt window by clicking on the Start > applications > Windows system > guest.

  Type: net stop spooler

  Enter: net start spooler
  Type: exit

   

  2) open Windows Explorer and navigate to:
  %SystemRoot%\System32\Spool\Drivers\W32x86

  NOTE: any % is usually C:\Windows, but it might be "winnt" or something else; It is set when the OS is installed.  Most systems are like this C:\Windows\system32\spool\drivers\w32x86

  (3) in the w32x86 folder, there will be other folders and files.  Delete everything inside, but DO NOT remove the w32x86 folder.

   

  4) restart the computer - perform clean boot in Windows 10 / 8 / 7

  Source Posted by a member of community jaredjb

  Please reply to this message with the results. I can't wait to hear strings attached good luck!

• LaserJet MFP M277dw Pro: Windows installs its own printer driver after failure of wireless printer, print

  It is a problem really bizzare, I will try to explain as clearly as possible what happened:

  • I have 277dw LaserJet MFP Pro, which is connected to my PC via wireless network. I installed the drivers from HP and everything worked as a watch movement - printing and scanning.
  • Yesterday, the power is out for about 30 minutes. Computer stayed on thanks to UPS, but the printer power loss.
  • Once the power was restored to the printer, printer initialized and I was able to access his page of HTTP status without problems. All the parameters of the printer has persisted. Same IP address. Printer all self-tests pass. However, I have lost the ability to print (printer shows more as an option in the print dialog boxes). Scanner works as usual, save the scan to a network folder.
  • The State of device HP icon has disappeared from the taskbar.
  • A bunch of new entries titled "NPIF7BB8E (MP Color LaserJet MFP M277dw)" appears in the Device Manager. This 'new' device appears in the Device Manager 5 times under different categories of devices (see attached screenshot). In the Event Viewer, I discovered that Windows installed for this device right when the power has been restored to the printer.
  • Under control panel-> hardware and sound-> devices and printers, all devices installed by HP are grayed out and their status is not connected.
  • Restarting the computer does not resolve this issue.

  Anyone have any ideas on what is happening here? It's the second time this has happened - I was able to fix the first time by reinstalling the printer drivers. However, I don't want to have to do every time the failure. This looks like a bug in Windows or the drivers.

  Thank you!

  

  Hello

  Most likely your operating system is set to automatically install the drivers, when the lost connection the WPS driver build has been added.

  Try these steps and check if that helps:

  1. In Control Panel, select network and Internet.
  2. Open the network and sharing Center.
  3. Search your active network profile, it appears just below the name of the network (for example Private Network, work network)
  4. The side pane select change advanced sharing settings.
  5. In the profile category, uncheck 'automatically enable the configuration of the connected network devices '.
  6. Click on save to confirm.
  7. Devices and printers remove any element M277 printer), as well as Device Manager (remove the two original HP or WPS item, you should see is no longer the M277.)
  8. Once select start > all Apps > HP > HP Laserjet M277 and select the shortcut to reconfigure the device, it can appear as the printer software installation & connect a new printer, etc.

  Hope that helps,

  Shlomi

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• LaserJet MFP M127fw Pro: Easy Scan

  Hello

  I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and the program title bar is grey. Clicking on it will make the menus work and I can see the name of material, but even to open a new session of analysis does not show the real program window.

  Appreciate any help.

  Thank you very much

  I'm responding to and mark my own post as solved.

  The solution was simple and as always, was not a problem with the system as much as the operator...

  Somehow the corresponding window opened onto a second screen-deleting now. So I couldn't see it. Muppet.

  See you soon

  Stig

• The windows firewall settings 7 HP LaserJet MFP M127fw Pro

  Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

  A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

  Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

  and the printer goes to sleep...

  I am on a 3 MB connection WiFi ISP... I'm just too impatient?

  The firewall settings windows I have to do?

  Any ideas?

  Windows 7 Home Premium 64-bit

  Gigabyte Intel I7 W

  16 GB OF RAM

  Hi @CCcrider

  Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

  Please let me know the results.

• HP laserjet MFP M125a pro: m125a

  Hello, I just bought a printer hp laserjet MFP M125a pro yesterday and during printing a document of 30 pages, I noticed the steam that comes out of the printer and the fumes forming. I have that it is quite normal on cheap laser printers that don't have a fan built in red (I assume that this printer has not), but again, this is not a cheap device. I'll try to get a new high of paper and see if it is still "steam". Does anyone have this problem with this printer?

  Thank you

  Bogdan Preda

  Hi @PredaBogdan,

  According to me, there is nothing to worry.

  HP has tested the performance of this product extensively, and this moisture is part of the normal operation of the product. The steam occurs because moisture condenses in the output area until the internal temperature reaches a level at which occurs without condensation.

  Thank you.

• HP LaserJet MFP displayed as HP LaserJet MFP M127nw Pro M127fw Pro

  I have a MFP HP LaserJet Pro M127fw. When I added printer with application code specified printer was a HP LaserJet MFP M127nw Pro. Is this a problem? I use MOSX 10.11.6 on a MacAir

  Hey @pfedwards,

  Welcome to the Forums of HP Support!

  I see that your range of printers Laserjet M127fw shows as printer Laserjet M127nw in connected HP. If the printer prints correctly via ePrint, it of a typo and has no effect on the operation of the printer.

  Please let me know if that answers your question or resolve your problem. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• HP LaserJet MFP M127fw Pro: I need a free scanner software for management.

  My all-in-one printer-scanner is HP LaserJet MFP M127fw Pro.  I need a software that will manage the scan function.  I don't know what these programs are called to a category, but what they do is:

  1. save my settings,

  2 tell the scanner if I want to do an overview of the control program to display,

  3 Let me drag a border to select the section of the preview I want scanned.

  4 tell the scanner to scan,

  5. display the scanned image or document,

  6 ask if I have another page in the same document,

  7. save the image or document where I want, with a name I go,

  8. save images in different formats,

  9 save documents in the .docx format, .tif and a few other formats.

  10. documents of OCR.

  My operating system is Windows 10.  A free program that makes the most of these things would be great, but if you recommend a program that is not free, I'll buy it if I can't find a free good.

  Can anyone recommend such a program?

  Thank you.

  Hello

  Its specifications:

  • Scanning with HP LaserJet scan request or TWAIN - or WIA compatible application software
  • Windows Scan SW supports the file format: RAW (BMP), format PDF, TIFF, JPG, PNG.
  • Mac Scan SW supports the file format: TIFF, PNG, JPEG, JPEG-2000, PDF, PDF searchable, RTF, TXT

  Source: http://store.hp.com/wcsstore/hpusstore/pdf/cz183a.pdf

  Scanning HP for MAC software that comes with the printer can make 1, 2, 3, 4, 5, 6, 7, 8 and 9. To docx, you can convert form RTF or TXT formats. For 10, you may need to purchase.

  For Windows, try it please:

  http://free-OCR-to-Word.en.softonic.com/
  http://www.free-OCR.com/

  for Word:

  http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Good luck.

• HP LaserJet MFP M525 500 and. : felt for drivers HP LaserJet 500 Multifunction (color)

  Hello

  I need to get the drivers for the two following ACM:

  HP LaserJet MFP HP LaserJet 500 Color MFP M575 M525 500

  I need em for Windows 7 Pro 32-bit and 64-bit, preferably 64-bit. I can't find corresponding anythging on HP web pages.

  I don't know if it would work with the Universal Printer PCL6 Drivers?

  Can someone explain me or send me any links where I can download the drivers?

  Thank you very much

  Hello

  M525 download below the full features software (it's for the two 32 64 qnd):

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5118274&swItemId=ds_105339_3&swEnvOid=4063#

  And this link is for the M575:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5118243&swItemId=fp_105434_3&swEnvOid=4063#

  Kind regards

  Shlomi