LaserJet P1102w: HP P1102w does not illuminate

Similar Questions

• LaserJet P1102w does not connect to WIFF

  This is a new printer right out of the box and he can't make it work wireless.  I followed the instructions to install the printer, but the HP Smart Install says its downloading the software, said over.  Is not further in order for me to set up the wireless part.  My computer does not have a CD, so I down loaded the disc and when I start it, it goes into a film on how to unpack the printer, etc., any wireless configuration.  I tried setting up this printer on another computer and get the same problem.

  Hey there @paxton2644!

  Thank you for posting back!

  I suggest all initially set the printer to the wireless settings and try again the wireless installation.

  To restore the default settings of the network:

  1. turn off the product.
  2. press in and hold the wireless and the Cancel button and then turn on the product.
  3 hold the keys down until all lights flash in unison, and then release the keys

  If you already have the software, you can check the configuration wireless in the HP folder.  I suggest to try the Wireless Configuration before you uninstall and reinstall.

  To access the Wireless Configuration:

  1. connect the device wireless to the computer via a USB cable.
  2. click on the Start button and then click on the programs or all programs.
  3. click on the HP menu item and then click the printers HP LaserJet Professional P1100 series
  menu item.
  4. click on the wireless settings menu item.
  5. follow the on-screen instructions to configure the product to print on a wireless network.

  Before installing the software for your printer, you must uninstall the old software.

  To uninstall the software HP click here: uninstalling the printer software

  To download the LaserJet P1102w software, click here: LaserJet P1102w drivers

  If you bought the printer less then a year ago, then it must always be within the 1 year warranty and you should not pay for support.  To make sure you got the right number of HP telephone support I can provide here.  Our technical support is 1-800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• HP laserjet p1102w does not work with Mac computer version 10.8

  Since I upgraded my Mac to 10.8 operating system, I'm not able to use my printer HP Laserjet P1102W ePrint. I was told that the current version of the 20130213 firmware does not support this feature. Anyone know when the new version of the firmware will be available to support this feature? Thank you very much.

  Manual, please let me know the result.

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• HP Laserjet P1102w does not appear in the list print and fax OS 10.5.8

  Receive a HP Laserjet 1102w and tried to install it on Mac OS 10.5.8.  I downloaded and ran the HP drivers but when I go to add the printer in system preferences/printers and faxes in the list of available printers is empty.  I tried several routines suggested by a search on the web about the problem without result.

  Everyone out there solved this problem?

  Thank you for your attention.  I found the solution.  See below.

  The printer is connected by USB and I also tried to get the wireless connection.  I had intermittent progress on both fronts, but could not make a successful installation of USB connection or wireless connection.  The printer would "disappear" the list of available printers (using the '+' to add a printer, OS 10.6.8) or does not meet the installation commands.  And I could not connect the printer wireless to my network of 'take'

  Print the configuration page was of no use.  If the printer is unable to connect to the wireless network, it reports the IP address of the printer such as 0.0.0.0.

  TO SOLVE THE PROBLEM

  (clicking + under "Print and Fax" printer is not displayed or the name of the printer is removed)

  (1) replace the USB - the original was sensitive to cut;

  (2) give up the wireless - to - wireless set up methods - no amount of factory reset does not erase block of connection of mystery;

  (3) set up the connection through a USB cable wireless (good);

  (3) to switch the browser used to display the configuration page from the printer in Firefox (for Mac OS 10.6.8 34.0.5) for Safari

  (4) use security mode WPA (WEP not as suggested by HP help files).

  The main troublemaker was the bad USB cable.  Go to put wireless in place assume that the printer can connect to the network. As already mentioned, the WiFi was not working.  Network blue light would not come into balance.  A transmission option was blocking handshaking between the printer and my wireless router.  I tried unsuccessfully recommended factory reset methods.

  I needed a good USB connection to access the printer configuration options.

  Don't know which increased with Firefox - a plugin bad or something?  It would be not just connect them to the printer via IP addressing.  Safari worked fine.  (The printer is now successfully Setup that Firefox has decided to work too.)

  THE SOLUTION IS:

  (1) connect the printer and Mac via a cable (good);

  (1) use Safari to go to the printer setup functions (through the system preferences/print & / fax options & supplies show printer web page);

  (2) follow the recommended configuration options (HP support for Laserjet P1102w, OS 10.6, via a USB cable to connect wireless);

  (3) select the appropriate wireless in the list;

  (4) restore WPA security mode; and

  (5) to give the printer the correct wireless network password.

  Thank you and the forum, for your help.

• Color Laserjet 3500 does not illuminate

  Hello, I have a HP Color Laserjet 3500, that does not illuminate. I replaced the power supply and the DC controller, but still nothing. When I hit the power button blinks the led on the Board of trainer, but that's all. The fan does not illuminate. Any suggestions?

  Hi oodletoodle,

  Welcome to the HP Forums!

  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps!

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• My MacBook Air does not illuminate

  MY MacBook Air does not illuminate?

  Nothing happens when you try?

  Power light?

  Tones? Startup chime?

  If you connect to the charger, which is LED color on the card?

• iMAC does not illuminate

  MY iMAC, which is several years old does not illuminate

  Take the test/diagnosis. Nobody here can 'pull' hardware problems.

  Barry

• 2009 iMac 21.5 does not illuminate

  My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

  Try to zap the PRAM or reset the SMC.

  Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

  Otherwise, take the model to your local store from Apple or a DAD.

  

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• Toshiba 40 L 345 * DB does not illuminate

  Hi guys,.

  I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

  Any thoughts?

  Rgds

  Kedders

  Originally posted by Kedders
  

  Hi guys,.

  I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

  Any thoughts?

  Rgds

  Kedders

  Hi Kedders,

  I just encountered the same problem. While watching the TV, it shuts down suddenly. Even model & 18 months and now dead. If I leave it plugged in now, we get the same thing - the power switch flashes between green and Red intermittently seconds or - but no picture at all.

  What's wrong?

  Kind regards

  Chris_UK

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite L500-1DT does not illuminate

  My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

  You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?