LaserJet Pro 300 M375nw: Laser jet pro 300 Firmware

Similar Questions

• My MFP HP Laserjet Pro M225dw stuck on HP «Initializ ing» logo

  I have a HP Laserjet the MFP Pro M225dw, less than a year. After having turned off for two months, he's stuck on the screen "Initializ ing" the HP logo.

  Can somone advise how to start?

  Greetings @LeeSRQ,

  Thank you access the Forums from HP Support for extra support! I see that the printer is locked during initialization after you have not used for two months. I will do my best to help you with this problem.

  Try a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I suggest to try and update the firmware of the printer. It always needs to be updated even if the printer is in an error state: HP LaserJet Pro Series Firmware Update Utility. Just select your operating system.

  I'll send you the reset of the printer try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
  Please let me know the results. Good day!

• Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

  Hello

  What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

  Thank you very much

  Paul

  Hello

  No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

  http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

  Kind regards.

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• LaserJet Pro CM1415fnw: HP Laser Jet Pro CM1415fnw prints not (message offline)

  On an irregular basis, my laserJet pro does not print, and it gives a message in offline mode in the print dialog box in MS Word. If I turn off the printer, then turn it back on then all is good. Can you suggest a cure?

  Hi @daleary,

  I was able to open the link in Chrome. Maybe try, if you're still having problems. Here's the link again: printer is offline (Windows).

  Thank you!

• MFP HP LaserJet Pro M126nw: Clarification of the use of HP Laser Jet MFP M126 nw Pro Page

  Hi support them.

  Recently, we bought a new HP Laserhet MFO M126nw Pro. The cartridge came with the new printer. I need a clarification of the HP Laserjet Pro MFP M126nw on the usage Page.

  We want to know how many pages that the printer has taken so far, printing and also how many pages is analysed and the copier took how many pages.

  I have attached the report using page for your reference.

  Please specify the things below.

  Pages for the scanned copy = 65

  I think he has counted only scanned copies 65.le is okay?

  2. What is Monochrome pages printed from copy = 66

  3. What is pages scanned host = 86

  4. print engine:

  1. total Impressions showing 829.

  Overall, I think it's showing printing, copier, 580 the scanned pages. Is this OK.

  2. What is jam events?

  It's showing 1.

  3. What is EconoMode Impressions?

  showing 0.

  4. What is monochrome prints?

  showing that 829

  Need to clarify the details above for my knowledge.

  Your support is much appreciated.

  Thanks in advance

  Concerning

  R.Pradeep

  the digital and print values are different.

  pages scanned copy 65 - this means that 65 pages have been executed by the scanner with someone using the copy function. the report shows 66 printed pages 'copy' which means 64 of these copies were only a single copy and 1 scan someone made 2 copies - which gives you a total of 66 pages printed from the copy function.

  pages scanned to accommodate 86 = that means 86 pages were executed by the scanner with a person who uses the "scan to network folder" or "scan to computer" function

  That's a total of total of 151 pages run through your scanner. only 2 values that you add to the scanner are the "copy" and «scan to host» numbers copy of 65 + 86 scan-to-host ='s 151 total scans

  total impressions are 829. pages printed from copy fuction are 66 - if you subtract 66 829 that gives you the number of pages that have been printed from a computer = 763

  763 pages printed computer + 66 pages printed using the copy function = 829 total number of pages printed

• Color Laser Jet Pro M252n: LaserJet Pro M252 does not install

  I am trying to install a new printer. It hangs at 99% and then I get the following message. I tried several times but I still get the same result (or rather non)

  @mg14, welcome to the Forums of HP, it's a great place to get help, find answers and advice.
  Thanks for posting your request, I'll be more than happy to help you.

  I understand that you are facing problems with your HP Color LaserJet Pro M252n in which the installation of the software stops at 99%.

  Don't worry because I have a few steps that should help you to solve this problem.

  This problem may occur if the latest drivers are not installed.

  Please follow the step by step guide to download and install the latest drivers from the link: software and Driver Downloads

  Let me know how it works.
  I wish you a good day ahead.

• Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode

  I have Laser Jet Pro MFP M127FW.  This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print.  I can now no longer print documents, or send and receive faxes again.    When I leave on this screen, the message disappears and comes back about a minute later for inactivity.  I tried to unplug and plug the unit in the.  I tried to use the switch to stop the machine.  When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!

  It is a real problem for me because I use the fax machine throughout the day!  Can someone help me?  Thank you so much in advance!

  Hey @nhorn1115,

  Welcome to the Forums of HP Support!

  I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:

  1. Click on the configuration icon that looks like a key.
  2. Click on Service.
  3. Click Fax Service.
  4. Click clear saved faxes.
  5. Connect the cable of the fax.

  Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Laser Jet Pro MFP 177fw: cannot scan with Laser Jet MFP 177fw Pro

  I have been using my 177fw Laser Jet Pro MFP on a Mac 10.10 for awhile.  Print, fax & scaning all worked.  I can scan is no longer.  I get the message "the scanner has not completed analysis" (there may be another message before that but it crushed until I read.).

  I use a USB cable for the connection.

  On August 31 I got HP Printer Software Update Verson 5.  What is my problem?

  Thanks for your help.

  Hi @scg117,

  Welcome to the HP Forums!

  I noticed your post about how you can't scan with your MFP HP Laserjet Pro 177fw on your Mac. And I'm happy to discuss this issue scan for you!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  To copy:

  1. load the document on the scanner glass according to the indicators on the product.

  2. close the scanner.

  3. on the product control panel, press the button number of Copies.

  4. Select the number of copies.

  5. press the black start copy button or the button color launch copy to start copying.

  Let me know if it works, or if you see another error message.

  If the copy works, then try the steps described in this guide, Scanner USB connection is lost (Mac).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• Laser Jet MFP M127fw Pro: Windows 10 Upgrade causing failure print

  Installed Windows 10 free update of Windows 8 - everything is going well until an automatic upgrade on August 13, 2015.

  Since the 8/13 patch (?), the Laser Jet Pro MFP M127fw spool print jobs, but do not go to the printer.

  Removed and reinstalled HP provided the CD with the same results.

  Test print at the end of installation OK.

  When you try to print from Outlook 2003, Windows 10 returned two error messages

  It said printer error state.

  Other says something about outbind failure.

  Same feeling of failure for Adobe 11.0.12.

  Word and Excel also

  Name of the default printer in Windows print Manger is:

  HP LaserJet MFP M127-M128 PCLmS Pro.

  HP "AUTOFIND PRODCUTS" set ID's of this printer as:

  MFP HP LaserJet Pro M1136

  Resolved failure printing using HP diagnosctic tool 'HP and Scan Doctor 4.7 printing'.

  Installed an AVAILABLE to update the printer driver.

  Not until the 'WITHDRAWAL of POWER' to restart.

  Everything looks OK now.

• Driver for Laser Jet P1005 for Windows 8.1 Pro 64-bit

  Hello. Desperately looking for Laser Jet P1005 for Windows 8.1 Pro 64 bit drivers. Is it still out there? Can if so someone you please provide a link? Thank you.

  Hi @Evanescenc3,.

  I see by your post that you are looking for 64-bit Windows 8.1 for the Laserjet P1005 drivers. I can help you with this.

  Here's the URL to the printer drivers. Base driver HP LaserJet P1000 P1500 Hostbased Plug-and-Play.

  You can also select the tab for the installation. It provides the steps for installation.

  If you need help, let me know.

  Good day!
  Thank you.

• HP Laser Jet MFP M127fw Pro: How can I enable send/receive faxes "On" or "OFF"?

  I just bought and installed an HP Laser Jet MFP M127fw Pro and I am really impressed so far! However, I can't figure out how to activate the fax answer simply 'on' or 'off', which is my preferred way of handling. Any suggestions? Thank you!

  Hey @BWC3,

  Welcome to the Forum from HP Support.

  I understand that you're looking to configure the settings of your HP LaserJet Pro MFP M127fw fax.  I would like to help.

  Here's what I recommend:

  • In the front panel of your printer, press Setup key
  • Touch Fax Setup
  • Touch basic settings
  • Tap Answer Mode
  • Here you can choose either Manual or Automatic.  'Manual' selected you are essentially turning the fax answer capacity off and "Automatic" would naturally be the setting 'on '.

  Let me know if you need help - I'm always happy to help you.

  Have a great weekend!

• Laser Jet MFP M125nw Pro: the paper is stuck inside the printer

  the paper is stuck inside the printer Laser Jet Pro MFP M125nw

  Did you follow the information from the HP web site?

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-MFP-M125-series/5396664/model/5303404/document/c03921935/

• Color Laser Jet MFP M277dw Pro: Color Laser Jet Pro Scan to network file

  I'm trying to implement the network folder with my Color Laser Jet Pro M277dw and my MacBook Air with OS X 10.10.5 MFP scanning.  I've implemented the SMB shared folder as indicated, you can see here where I gave everyone access read/write:

  

  On the HP management page, I put in the path by using my IP address, as suggested in this article.  However, the connection test is always a failure.  Could someone give me some advice?  Here's what I came in the form of HP:

  

  Thanks for the help!

  Of course

  You can find the firmware on the page of product below:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Kind regards

  Shlomi

• Laser Jet MFP 127fw Pro

  I have a Laser Jet MFP Pro 127fw. I can scan by clicking on the icon to scan on my desk. Is there a way I can add an option to scan for the small screen on the printter where icons for 'Copy', 'Fax' and the 'Apps' icons appear? Or do I always have to run a scan directly from my PC?  Thank you.

  Hello @jvelazquez, thank you for this question! I will do my best to help you today.

  From what I understand you do all your scans of computer software. Ask yourself if you are able to download a scan icon on the front of the printer display panel.

  Here is a link to the user for your MFP HP LaserJet Pro 127fw guide. User's guide.

  From what I see, what you ask is not an option on this model. We hope this isn't too much of an inconvenience for you.

  Thanks a lot for your time! Can't wait to hear back on your part! Have a great week.