LaserJet Pro M402dn: One side printing as default on HP M402dn

Similar Questions

• HP LaserJet Pro M402dn: Generic AirPrint driver HP LaserJet Pro M402dn - when a dedicated driver will appear - Bug report?

  There is a bug report or request.  If I turn my HP LaserJet Pro M402dn via Airprint, I can't get a generic driver.  This means I can't print envelopes because DL size paper is not available via wildcards.  In MS Word, I see the evelope (DL is supported) where to print but prints biased mode A4.

  Will be a good pilot ever written?  After all, that this is supposed to be an AirPrint printer.  Or will be fixed this problem with 10.12 (Sierra)?

  Maybe someone could tell me how to contact someone who can tell me if my questions cannot be answered here.

  Thank you.

  Bill

  Hello

  This is now fixed.  I can sent this file you ealier discussions:

  HP-printer-essentials-SE - 4_7_0.pkg ( https://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US ).

  But I never installed it because he had a date of 2015 on this subject.  My fault, I thought he was old.  It's one thing to Apple.

  I ran that Installer and training specific to a printer appeared and now I can print envelopes on airprint.

  I know that this really has nothing to do with you, but maybe this file must be included with the routines of installation of Mac with HP Easy Start?

  Thanks again for your suggestions.

  See you soon,.

  Bill

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• Color LaserJet Pro CM1415fn MFP - professional printer with just a feeder?

  I'm confused. He is a professional office color printer - which means that a number of print media will be used to print on a daily basis.

  And after buying this printer at Amazon, I discovered that there not a manual feed tray and one paper tray.

  I have print of legal documents - copy desk in our records, on cheap paper, a paper of good quality to the client and an envelope.

  So I have to print a simple letter to remove and replace the Board THREE TIMES. This is not good.

  My simple Canon printer internal, or any other printer I've seen ALL have manual power option.

  QUESTION: could you please let me know if there is an attachment to this printer that would allow me to print manually, or should I send the printer to the shop?

  Hi GarryStotel,

  No, this printer does not have an add on the extra add envelope feeder on the plates as accessories. Looks like you need a little higher level printer as one of the following units (color HP LaserJet Pro 300 M375nw MFP color HP LaserJet Pro 400 M451dn printer) I included a link to your review these printers below.

  http://shopping.HP.com/en_US/Home-Office/-/products/printers/printers?SearchParameter=%26%40QueryTerm%3D * % 26brandprinters_dte2% 3DLaserJet % 26categoryusageprinters_dte2% 3DBusiness % 26CategoryUUIDLevelX %3 D 6. YQxXjbkYMAAAE0nvZcZzO9%26TieredPricing3%3D%255B400.0%2BTO%2B599.99%255D%26%40Sort.TieredPricing%3D0&PageSize=15

  LaserJet CM1415fn:

  Overview

  Print, copy, scan - in color - and fax, with the first HP LaserJet printing from the Web and mobile devices. To connect to a wired or wireless network. [4] using a screen color touchscreen to print sharp documents. Save energy and reduce your impact.

  Ideal for the

  Companies that are looking for Wi - Fi and networking in a color multifunction capable of printing from the Web via a touch screen and applications and mobile devices.

  Features

  Put easy, touch screen, print on your desktop. Use business apps and the 3.5-inch (8,89 cm) color touch to access and print the information on the Web. [7] Stay productive on the move. With HP ePrint, now you can print from virtually anywhere. [6] Now with AirPrint™. Simply print wireless from your iPad®, iPhone®, iPod Touch®. [9] Spend more time on the business and less time on the program of installation and maintenance. Easily copy on both sides of an ID card to a front document.

• Color Laserjet Pro M452nw: Not accepted print job

  Just installed a new HP Color Laserjet Pro M452nw today, it connects using wireless to my network.  I followed the installation instructions and everything seemed fine and I was able to print the test sheet.  However, when I try to print a document from my MacBook, I get an error message in the print queue, declaring: "Print job not accepted."  I saw the support log, find others with the same question, but maybe on the models of different printers.  In any case, I have followed the instructions for the patch, installed a new printer driver Apple, reinstalled the printer, reset the printing system and I keep having the same problem.  Furthermore, he sometimes interrupts the print queue after encountering the error.  Do not know what to do...

  Hello @sanovogo

  You can try the following changes

  Go to the network set up on the printer and network services, disable ipv6 (disable)

  Go to the link (always within the network set up the menu) speed and the complete change to 100TX

  Sent a new print job to the unit

  If it fails while you see the error on the PC to the printer and try to deal with a report of configuration in the menu reports

  Get the IP address on the right side on the 1st page under settings of the printer

  Enter the IP address in the URL of web browsers, this online application should open indicating the status of the printer in this way can isolate you the connectivity to the printer

  If by this desire to point showing the error on the PC, you can print the configuration report and Web site opening, I'll suggest another pilot, because it must be the one having the problem I could give other recommendations but will like to know what happened first

• HP Officejet Pro 8620: One side scanning instead of both sides

  Whenever we scan with the printer using ADF, ALWAYS scan both sides of the document. We want to scan only ONE side, but we cannot find any setting switching on both sides for only one party to scan. It's very frustrating because whenever we scan, we have the right page and one white. We use Adobe Acrobat and driver scan TWAIN of the model.

  Is it possible to set up the printer we want?

  Best,

  JM

  Hi @keyser2015,

  Welcome to the HP Forums!

  I see you try to do a side scan instead of the two sides, with your HP Officejet Pro 8620 on Windows 10. And I'm happy to help you!

  Each scanning program, has their own features. I'm not familiar with the use of Adobe Acrobat, so it is possible the functionality are not available in this particular scanning program. If you need help on the use of Adobe Acrobat, I would say to contact our Support from Adobe, for assistance.

  In the meantime, I suggest try using HP Scan instead and see if the option is available on the main screen to choose scan front side. If you have trouble with the HP scanning program, please try our HP print and Scan Doctor, to see if it can automatically solve the problem for you!

  Hope this information is useful and thanks for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP LaserJet Pro M252dw: Won't print - HP LaserJet Pro M252dw drawer of toner cartridge does not retract

  Toner HP LaserJet Pro M252dw cartridge drawer does not retract.  The small blue drawer pull is out there is no way to open the drawer.  This flaw was not discovered until I needed toner, 5 months later - this printer was bought in January 2016 and worked well.  Now, it's just a big box of heavy using the space in my office.

  I can't be the only person with this problem printer!

  Thank you

  JQ

  Hello @jakehuesand welcome to the Forums of HP! Although I would like to help you with your M252dw, I'm not sure that I can do on one piece broken other than suggest that you call us. HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you want to: check your warranty status.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  Feel free to post again if there is anything else I can help you with that.

  If my answer meets your needs, please click Accept button Solution below to report your post as solved. Thank you.

• the Laserjet Pro 200 MFP can print on 110 lb card stock?

  The all-in-one Color Laserjet Pro 200 can print on card stock 110lb?

  Hello

  The following specifications matrix info shows:

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5097655#! tab = specifications

  Weight, supported

  60 to 163 g/m² (up to 220 g/m² with HP laser glossy photo papers)

  Recommended media weight

  60 to 90 g/m²

  With the help of the following conversion

  http://okpaper.com/calculators/lbs-to-GSM

  110 lb = 162.8 g/m² or 163 g/m²

  This can work, a bit tie, no room for error.

  Kind regards.

• How to use the print face feature two automatic? I get only one side printed.

  I just got a new HP Officejet Pro 8600 and it says it's supposed to automatically print double-sided.  When I have a paper face two feed the paper from the upper bin feeder, it takes in and it then prints on one side, then he pulls the book which he just printed in as if he was going to print the second side, but then it ejects just page and does never print the second side.  I have an Asus computer running Windows 7, but I'm just trying to make a copy two faces to the right of the printer itself.  I went into the settings and there are two options under two back, we say '1-coast face 1 copy Original' and the other choice I have chosen is "1 side 2-sided original copy.  Those are the only choices.  What I am doing wrong?

  The two-sided printing module will print the back automatically when printing.  When making copies, it will print the back if you put two (or more) pages in the feeder and select this option to copy 1-face to face 2.  This model apparently does not 2 head to head 2 copies, i.e., it doesn't have a mechanism to scan the rear face of load in the ADF.

• LaserJet Pro 200 Color MFP: Print greeting cards

  Trying to print greeting card, side fold brochure front and back on a single page. Currently only able to print front and back on two separate pages creating cards on Microsoft Publisher. To print on printer Okidata without problem. Should what settings I have this HP Laserjet Pro 200?

  Hi srbabe11,

  Thanks for providing this information.

  I have provided the manual with the steps to change the properties of the printer, starting on page 34, which should help to print greeting cards.

  MULTIFUNCTION LASERJET PRO 200 COLOR PRINTERS.

  I had set the Pages per sheet: 2, then set the layout of the booklet as a result.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If there is anything else I can help you, let me know. Thank you.

• LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

  On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

  Very hard to advise without additional evidence (such as samples).

  With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

  Attached is a zip container file:

  • Small text in the abcde.txt file that contains the text "abcde".
  • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
  • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
  • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

  Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

  copy  /b  abcde.prn  \\computer-name\share
  

  in a Windows command prompt session, where:

  the computer name is the name of the workstation;

  share is a share of the Windows printer instance name.

  The resultant prints show the watermark of the SAMPLE ?

  If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

  Can generate something similar to your driver for analysis?

  [You will probably need help moderating to attach files in this forum].

• LaserJet Pro M127FW: LaserJet Pro M127FW stuck to print Fax Page 1

  I encounter an error on the MFP HP LaserJet Pro 127FW where it is blocked to message "Printing Fax Page 1". Cannot do anything else on the printer. I tried feeding this bike but still does not work. It has been like that for a few days now.

  In my view, there are some instructions on other threads to do a hard reset. Help, please.

  Thank you.

  As this does not work, I'll send you a private message describing how to perform a factory reset. You should see a private message to your forum Inbox shortly.

  Please let me know if this clears the fax message.

• LaserJet Pro M127fn MFP: Stuck "print fax page 1.

  I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

  Hi @cvsc ,

  I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

  I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

  If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
  In the forum next to your handle name simply click on the envelope to see.

  If you need help, let me know.

  Good day!
  Thank you.

• Color LaserJet Pro CM1415fn-HP Multifunction printer

  Hi all

  We have range of printers multifunction color HP LaserJet Pro CM1415fn when I try to scan the scaning page show but as soon as the scan complite he past he displays no result 0 pages 0.

  http://S30.postimg.org/e3sakkg81/Scan1.jpg

  http://S28.postimg.org/7vvv449dp/scan2.jpg

  Concerning

  Hello

  Welcome to the Forums of HP Support!

  I see that there are some odd scanning issues going on with the CM1415fn, watch the preview and then his party. It seems that the computer is a Windows computer, is this correct? If so, what version of Windows?

  Try running the printing and scanning Dr, it will look like check the drivers, software, etc.. I would like to know what the results are.

  See you soon,.

• LaserJet Pro black spots 200 printing line

  Hello

  I just unpacked it my new printer, and each print has a row of points on one side. I have run a few cleaning cycles and does everything else in the document:

  http://support.HP.com/us-en/document/c03416215

  Looks like that the toner cartridge has a spot on cant I sort the roller manually so I can see the place? Where can I get a new HP cartridge?

  Thank you!

  Andy

  Hi Vidtender,

  I just sent you a private message. If you are unsure how to check your messages from the forum, this Post instructions of a..

  Thank you.