Latest updates to VISTA causes internet to stop working.

Similar Questions

• attachments cause Internet Explore stops working

  We have two email accounts a Hotmail.com and a single live.com.      Several months ago, perhaps when OUTLOOK can be downloaded on the stage is no longer able to send an attachment.   A short document or a photo causes the error "Internet Explorer has stopped working".   This is the only problem we seem to have.  Any suggestions?

  This happens when you click on the attachment button, or when you drag-and - drop a file in the email (or both?)

  I think that what I would like to try if it was me is first to open Internet Options, go to the Advanced tab and click the reset... button at the bottom.

• HP 3.0 usb port plugged to USB 3.0 external causes internet to stop working.

  When 3.0 port on my HPE H8 - 1280T computer connected to an external drive usb Hitachi Touro Desk 3.0, my computer's Internet will become unstable and work stoppage.  Stayed at the various ports of 3.0 on my HP but with the same result.  My Hitachi Touro desk 3.0 usb external hard drive works but my HP Internet stops unless I have remove the 3.0 cable usb attached to it.  I also noticed that the transfer rate starts from 3 digits (175) where it suppose to be in this range and down slowly (57) a little more than the transfer speed 2.0 usb ordinary.  Any help is appreciated.

  The USB 3.0 motherboard works better than on the top.  It's work without crashing the Internet but very slow.  The solution I found is to uninstall Firefox resinstall browser and control panel the browser again.  Guess what, the browser works the way it should be wiithout crashing while I was with the Hitachi drive

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

  On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
  Method 2.
  a. also, you can try again user account if the problem is resolved.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Let us know if that helps.

• A problem with your video hardware caused Windows to stop working correctly.

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  Files helping to describe the problem
  WD-20090325 - 1017.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 84E10510
  BCP2: 8DA1F4B2
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 256_1

  Hello Neo22,

  Thank you for using the Microsoft Windows Vista Forums.

  When you receive this error?  Have you recently installed a new hardware?  Have you updated your drivers?  Please indicate any other information which could help identify it.  I've added a link specifically for the video material that could help.  Please let me know if you still encounter problems or if you have any other questions.

  http://windowshelp.Microsoft.com/Windows/en-us/help/648bead6-2e88-4B68-8771-d4358bdd8ab41033.mspx engineer in Support of James Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• When starting, receive error message "BM83b_2190.exe has caused windows to stop working.

  When I boot up I get the above mentioned error box. can someone tell me what this means and how to fix it?

  * original title - BM83b_2190.exe caused windows to stop working. What is - this? *

  Hello

  • How long you have been facing this problem?
  • What were the changes were made until the problem occurred?

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• receive a problem caused windows to stop working, will notify you if a solution is found. Display driver igfx has stopped.

  the computer, ups and stops working...

  on a number of occasions, I get a blue screen with a print so small, that I can't read. Receive message a problem caused windows to stop working, will advise if a solution is found. Display messages to receive driver igfx has stopped working.

  You should look at the web site of the manufacturer of your video card or monitor to see if they have updated drivers.

• I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I'm paying for CC2014

  I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I pay for CC2014 I would use it. I tried to rename the "sniffer" to "snifferold" as bobmiller4002 has suggested, but the problem is not resolved. Lightroom works fine.

  Update your driver from the website of the manufacturer of the GPU video card to pick up the bug fixes that you are missing...

• Error message 'Adobe Flash Player Update Service 11.6 r602 has stopped working & has been closed'

  Original title: Adobe flash player

  I get a message 'Adobe Flash Player Update Service 11.6 r602 has stopped working & has been closed'. How can I fix the update service so it will update?

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Internet Explorer stops working and ends when I try to view the pdf

  I have a Pav dv4. Whenever I try to view a pdf file, Internet Explorer stops working and closes.

  Hello:

  Try a repair/reset to zero of the IE browser.

  See the link below. Use AutoCorrect it and then look at the screenshots below on the page to reset.

  http://support.Microsoft.com/kb/318378

  Paul

• Update Vista caused internet connection problems

  I have tried repairing computer of my sister, who says simply ceased to connect to the internet all of a sudden.  She said that began February 1... After looking through the system restore, I noticed there was an update installed on 31 January, so I restored the computer to the day prior to that, and now the internet works again.  Since then, I have disabled the automatic updates.  My question is: How can I solve this problem?  I can't leave just for always updates disabled...

  Hello
   
  Please can you us on the update that is causing this issue?
   
  This problem occurs especially if there is a conflict between the update and the application program on your computer, mainly the antivirus program.
   
  That's why I suggest to disable and re-enable the antivirus program or the security on your computer and try to update the verification of updates if the problem is resolved.
  Ensure that you re - activate the security on your computer program after a repair.
   
  Try here to reset windows update components and then try to install the updates.
   
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Also, I recommend you to uninstall and reinstall the network drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and
  Maintenance and then click Device Manager. If you are prompted for an administrator
  password or confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on uninstall the driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also try to troubleshoot using the network troubleshooter in Windows 7 and make sure that the error message to follow the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Latest updates installed (today) causing script error...

  Before installing the latest updates, our MRP program would produce a PDF file that can be printed / emailed.  After the update, I get the following error message: cannot export the report... file://jbserver/JobBOSS%20Server/Reporting/JBReport.vbs, then OU want to continue running scripts on this page?

  I know that 1 updates causes this error, but not that one, I would uninstall that one and be able to advise my company update not installing.

  Thank you!

  Hi Bob,

  We could identify that update (KB3102429) was the origin of the problem with us export our MRP system.  I uninstalled the update and then I hid it to avoid this update again in the future.  It is great for us, and everyone is back running.

  I hope that this solution will work for you.

  Best regards

  Holly

• Error 646 when updating Windows and Internet Explorer stops working

  Original title: error code 646, and...

  I'm using windows 7 in the Dell (inspiron 1110) laptop. I am facing these issues recently-

  Sometimes my internet explore constantly work work and only when the new window is open.

  While the update of windows it is an update to install (a security update for Microsoft Works 9 (KB2092914). Then when I press the button install after few seconds it says "some updates have not been installed. errors found code 646. Update widows to meet an unknown error.

  sibhowmik,

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47>

• Internet Explorer stops working stops down. There?

  Explorer stops working even with new anti-virus software.

  Hello

  What new anti-virus software? Have you used the old tools its system to the to remove the old antivirus?
  If this is not the case, they leave problem causing remains.

  Check out this list for some of these removal tools.
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  -----------------------------------------------------

  Hello

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------

  Internet Explorer not responding, stops working, or restarts
  http://support.Microsoft.com/GP/pc_ie_start

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.