HP 3.0 usb port plugged to USB 3.0 external causes internet to stop working.

Similar Questions

• USB PORTS STOPPED WORKING

  My USB ports for Entertainment of HP Pavilion laptop dv7-2277 cl stopped working.  I tried to update to Windows, since before system restore and still no luck.  the port on the left side of the laptop shown peripheral unknown whenever I plug anything in there and nothing does.  the two ports on the side right are nothing at all.  The indicated device MGR I use the current drivers, but he doesn't know what I use in the car.  I tried 3 different mouse and ACC Player.  This seemed to happed after that March 11, 2014 Windows update or after plugging in headphones NXG technology to charge the battery.  NXG assures me that they are not the problem and their agenda only charges the battery of the power from the USB port.  Ports due light ACC Player or headphones indicating the power is in them.  I'm stuck and have no idea what else to do.  Please help if possible.  Thank you for reading and taking the time to listen.

  My computer is now fixed and I'm superised that nobody else on this forum had the same problem.

  Microsoft just send a new update for USB mouse and if ports pointers fixed my question on all my USB.

  HAPPY CAMPER!

  See you soon!

• My usb mouse stopped working

  The problem is that my mouse usb (USB Microsoft IntelliMouse Explorer 3.0), has stopped working, the light is on but the cursor does not move it works when I restart my computer. I tried the other mice and after some time (can be 2 min, 1 h its random) the mouse stops working. I tried to use the other usb ports and it dosnt work, I tried the system restore, but the dates are after the onset of the problem. If anyone can help me, I would be grateful. And sry about my bad English, which is not my language.

  The only thing I found that worked the first time, every time (so far) is simply stop and UNPLUG your computer (for laptops... Disconnect the battery as well a few moments).

  With the machine on, the motherboard may still have activity.   This is what needs to be reset.

  Remove power, reboot and see if the mouse started working as you go through the screen "windows".

  Once logged on, it should pass the routine "found new hardware". This will solve the problem of "Unknown USB device" which is related to the mouse works do not.

  It could be useful!

  See you soon

• Mobile Mouse 4000 stopped working with USB 2.0 port, works with 3.0 port.

  I just bought the Mobile Mouse 4000, eventually find the necessary drivers, installed, but still does not work, after plugging in all my USB ports so I decided to plug in on my single USB 3.0 port, it works. Nowhere on the site, or on the box does say USB 3.0 required, I went through my device manager and all the usb ports work correctly, even, I went in the power options and turned off the selective USB power option so that they are all on. How to work with normal 2.0 because I would like to save the port 3.0 for my WD external hard drive.

  Original title: is the Mobile Mouse 4000 only USB 3.0?

  Hello

  1. What is the brand and model of your computer?

  2. are you able to work with other USB 2.0 devices normal port?

  3. what happens when you try to plug the USB key?

  4. What is the operating system installed on the computer?

  I suggest you to connect the mouse to another computer and check with the question.

  Method 1: Run the Fixit described in the article:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on Startand then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3 in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• Pavilion dv8000: win7 usb ports dv8000 for has stopped working

  all 4 of the usb ports on my dv8000 has stopped working. Ive tried to update the drivers, no luck. He originally had XP as an operating system, but it has been upgraded to windows 7, I don't know if usb disks are corrupt or what. When I plug anything into the usb ports, it does nothing. Ive been trying to get this fixed for so long and his frustration, someone knows how to fix this?

  Hi again bigd4747,

  It is good to hear from you!

  I have conducted research on software and compatible driverscommits and have found that your laptop has no compatible drivers for Windows 7.

  Alternatively, you can try to update the drivers of USB port in Device Manager by following this document on How to install a driver in Device Manager. If it does not install the necessary drivers for the USB communication, you may need to downgrade to Windows Vista (32 bit).

  I hope this helps!

  Best regards

• Two of the four USB ports on my laptop has suddenly stopped working!

  My laptop (HP Pavilion) has a total of 4 ports USB (two on the left side) and two on the right side all of a sudden my laptop developed this problem, two ports USB on the left side of the laptop no longer works... They didn't stop working completely, because I can still charge my phone via the ports, but they do not detect any storage device I plug into them. The other two on the right side work perfectly... I checked my mobile device manager and the defective thing only seems to me pointed out under "other devices", where the driver for 'Fresco Logic' hub USB root is not installed... it shows "the drivers for this device are not installed (Code 28)" Please, this could be the problem and where can I find the driver?

  Hello

  You are welcome!

  I am pleased that the issue is resolved. Since it works fine, I do not think you have to worry.

  However, you can check this link:

  http://support.Microsoft.com/kb/2654568?WA=wsignin1.0

  To find the version of ports, you can consult the HP manual (specifications).

  It will be useful.

• USB ports stopped working unexpectedly

  Hi, I am currently on "Toshiba Satellite C655"run"Windows 7 Home Premium". It's a laptop of 2009 model (2 GB). Last night (24/02/14) my USB Ports stopped working, they have been and continue to read anything every time I have to plug my devices. I usually only connect a cooling block and a USB mouse to the computer. They worked perfectly until I disconnected the. When I reconnect them, they work momentarily, and then I hear the beep sounds when you eject a device. I tried to connect several flashdrives, a printer, and one I tried the following hotfixes:

  Note: The order of numbering has nothing to do with the order, I tried to apply each patch unless specified elsewhere. This computer had Windows 7 Home Premium REINSTALLED at some point. Just for your information. This message was made when there are others with the same problem is due to the fact that no solution not specified by Microsoft Technical Support or the Microsoft community were effective.

  1) System Restore to the last known point, where they worked (and still). (Point restoration @ 15/02/24)

  2) Windows Update

  3) turn off the computer, disconnect the battery and the power supply and holding 'On' button for 10seconds.

  (Note: whenever I turn on the computer now they work only for a moment, usually from 60 to 180 seconds.)

  (4) Start > research ' Device Manager '> "De Bus USB controllers" Expand and turn off and restart the computer. They are re - activate automatically but my problem persists.

  (5) download and run "Microsoft FixIt.WinUSB... ", on the 1st, I had a problem with devices not updated. But I actually watch updates by using Windows Update and ""searching for hardware changes "" on USB Bus controllers "." I then did a 'System Restore' and now Microsoft FixIt found no problem but the USB Ports don't always work.

  (6) will ' services.msc"and change the Startup Type of Manual to Automatic for Windows install and restart Windows."

  7) regedit

  8) sfc/scannow

  I am really lost with this problem now. My laptop works and worked perfectly fine until this problem occurred. I have fixed minor problems with computers before, but this is a bad joke for me now. If someone could please help me with this problem I would appreciate it a lot. Thank you very much.

  Thank you for your help, but I discovered something funny on my computer. My cooling package (product name: Laptop Cooling Pad NSB;) HYCF-6181-2 model number) is to disable my USB ports when I plug. If I leave it unplugged and restart my computer, my USB mouse is still working on a port. Also tried using my USB and other devices. The problem is my block of cooling that strangely disables my USB ports, whenever I plug. Thank you very much for your quick response, fortunately the answer might help me in the future. For now, I have solved my problem.

• Two of my USB ports stopped working (wired mouse and iPhone do not respond). What should I do?

  I have a laptop Toshiba Windows 7 which has two USB ports, which both have stopped work or respond. They were both working an hour ago and I made no changes to the computer. I have a wired mouse connected to one of the USB ports and my iPhone plugged in with a USB cable. The mouse is not responding and my iPhone is not being detected or charged. What should I do?

  Hello

  1. do you think that no matter what error code in Device Manager?

  2. you are trying to connect other USB devices to the USB port and check if it is detected?

  3. have you rebooted the system to see if they start working?

  Method 1:

  Follow the link below, run the fix it tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  1. click on Start, type Device Manager in the start search box, and then press ENTER.

  2. in Device Manager, click the Hardware tab,

  3. expand Bus USB controllers.

  4 right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  5. restart the computer, and then reinstall the USB controllers.

  6. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Let us know if it helps.

• All USB ports stopped working Windows 7

  Windows 7 Pro. All USB ports stopped working.  When I plug a usb card, windows makes the sound as it connects and the card gets power (light).  I see the map appear in disk drives in Device Manager.  The player does not display in windows Explorer or disk management.  In Device Manager, it has an exclamation point and says that the device cannot start.

  Strangely, I have a USB keyboard and mouse and they work very well.

  It's just the USB drives and chips and SD cards that are not displayed.

  I have:

  Reinstalled the drivers USB MB

  Flashed the BIOS with the latest version

  Tried to install the older USB drivers

  Tried to let windows find the driver.

  Still does not

  None of this has helped.  I ended up formatting the HD and reinstall windows from dvd.

  This revealed that my USB multicard reader was bad.  When I unplugged the problem disappeared.

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• USB ports have stopped working on the Satellite C

  Hello. Just turned on my laptop and found that the USB ports hafe has stopped working. No mouse and no external storage. Any ideas?

  What USB port status is visible in Device Manager?
  Are no yellow exclamation point visible?

  Expanded the USB hubs and region of controller and remove all the listed USB ports / controllers from the list of devices.
  After that, restart the device.

  The system should reboot and the USB ports should be recognized and installed automatically.

  Try this workaround short and report results.

• SQosmio G50 - 10 H - one of the usb ports stopped working

  Hello forum,.

  I have a BOUNCING problem with usb ports on my qosmio g50-10 h.
  There are two ports on the right side of the machine and I have 2 self-powered 7 centers of port (usb 2) attached to these.

  Every now and then to stop it from ports and of course all the parts a unregcognised, not found.
  I get error messages saying unregognised device or usb device stopped working or windows stopped device etc.

  Unplug the hub and repluging it ususally actually come back to life.

  any ideas?

  Stafford

  Hello

  Have you tried to connect devices directly to the USB port?
  Try this and see if the USB device is disconnected, as you mentioned that using the external USB hub.

  Generally speaking, it is difficult to say what might cause this
  You could try updating the chipset driver.
  Of course, you should also check the USB port settings, and power management options for economy.

  In device manager-> USB root & hub-> properties you could disable for unique energy saving USB ports.
  This also on Win 7 power management.

• Satellite L850 - USB Port stopped working

  Hello guys,.

  first sorry for my bad English, im from Germany.

  My new clearly L850 satellite has had some problems with sound-Port USB.
  I think it's the Usb3.0 Port on the left.
  While I'm workin with an external keyboard, the USB Port has stopped working and cannot identify the keyboard.
  All other devices that I put there, are out of order, but when I put an external hard Powerdevice with separate data for laptop, that he is there something ist connectet, but can't identify it.

  I have try all troubleshooting close it, like install new drivers, disable ports and restart and any kind of it.

  So maybe you have another tip for me?
  Or do I have to bring my laptop to the store for warranty?
  A Windows 8 64 bit on it, maybe it will help.

  Best regards, neothic

  Have you tried reinstalling the driver USB 3.0? Please try and check the functionality. If this will not help I recommend you do the ultimate test: back up all your data and reinstall Win8 using recovery media. Test it with clean OS preinstalled and factory settings.

  In the worst cases, you should contact the nearest Toshiba service provider and ask for help.

• Satellite P850 - right USB ports stopped working

  I have a new P850 Satellite, after a short period, that the two right usb ports stopped working, I had only a wireless mouse connected to them at the time. Is there a reset for these ports, I tried to uninstall and reinstall, no change.

  Anyone has any ideas.

  > I tried to uninstall and reinstall, no change.
  What have you tried to uninstall or reinstall?