Latitude D630 screen resolution changes after no mooring and docking station re

Similar Questions

• screen resolution changed after Windows update

  PC: Dell Vostro 220 s

  OS: Windows XP Professional SP3

  Monitor: Dell 2009WFP LCD, is the native resolution of 1680 x 1050 (according to CNET review)

  Problem: After an automatic update of Windows, my screen resolution has been changed to 800 x 600, where the police has been huge and fuzzy on the screen.  Then, I realize now the display settings only have 5 options, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200 and 1920 x 1440.  The last of them is out of range.  So I put it to 1600 x 1200, but everything on the screen appears stretched.

  I tried system 1) at the earliest days of restoration, 2) unplug the monitor and reconnect the monitor, the monitor 3) download the Dell Web site WFP2009 driver, nothing works.

  Nothing has similar problems, how do I get the near resolution of 1680 x 1050, which is classified to the native resolution for this monitor according to the CNET Web site, and I vaguely remember what the maximum resolution in the display settings.

  Appreciate any help.  Thanks in advance.

  Hi mumimi,

  It seems that your system was shipped with Intel graphics card. As several drivers are appearing with exclamation points, I would say that you can download the latest drivers here-> enter the serial number of your system-> select OS--> download/install drivers in good order as given here.

  Please respond to the findings. He won't be far away.

• Screen resolution changes after Windows updates

  New update keep affecting my screen resolution in large print? When I install as a group, I have to restore it using an external hard drive.

  Hello Steve,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  I appreciate your time and patience.

  This problem can occur either because of incorrect display settings or if the display driver is not updated or is corrupt.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please use the suggestions in this article and check the issue.
  Reference:
  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  If this does not help, use method 2.

  Method 2:
  Update display driver of your computer from the manufacturer's Web site and check out them.
  Refer to this article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  See also:
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Screen resolution changes after that computer unlocks, starts or restarts

  I'm frustrated with my Dell laptop.  For the past few months after trying to use a higher resolution on my computer, 1920 x 1200 (was 1680 x 1050), he always comes back to 1680 x 1050, that I've had it for awhile.  Yields of resolution 1680 x 1050, when I start the computer completely stop, restart the computer or free sleeping positions, etc.  I am using Windows Vista Premium.  It becomes embarrassing when this happens (back) as a small bubble rises to the bottom say I can improve the resolution of change in 1920 x 1200... GRRRRRRRR

  Does anyone have any ideas or recommendations?

  Thank you guys!  I finally found a new driver installation of Nvidia.  Dell does not seem to have one that solves the problem.

  All is well now.

  Thank you!

• Tecra M9: After Vista standy, screen resolution changes automatically

  Hello

  I use a Tecra M9 with Vista SP 1. The current display to the nVidia Quadro VNS 130 M graphics card driver is 7.15.11.126
  My native resolution is 1440 x 900, 32-bit color. (the resolution of the screen)
  Sometimes, when the computer comes out of standby, the resolution changes after the sequence to connect to 1280 x 800 and stays that way. I have to manually change back to 1440 x 900. This isn't always happens, but say all of 1 times 2 the computer wakes from sleep.

  What is a (faulty) driver problem?

  Kind regards

  charlieMOGUL

  > Is it a (faulty) driver problem?
  Perhaps this problem could be related to the graphics driver.
  Have you tried to update?

  See European Toshiba driver and update the graphics driver.

• After each start up, screen resolution changes

  Under Windows XP.  I replaced my hard drive and since this event, my screen resolution changed.  When I change it back, it's OK for the rest of this session, but then, after a reboot, it is back.  I need to change once again.   How do I 'Finalize' my change to the resolution I want?  Maybe I did something wrong with the installation on the new hard drive.  Any suggestions?

  Thank you

  Mike to GO

  Hello

  You can check the status of the display driver in Device Manager:

  a. click on Start

  b. in the run box, type in devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  You can also view the Microsoft Knowledge Base article mentioned below and check if it works.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Let us know the results.

• Screen resolution changes

  Hey guys,.

  My screen resolution changes while I use my computer. The text is the most notable, change to a lower resolution. It seems to happen when I'm using the Windows Explorer, but it's pretty random. Sometimes, the icons in the system tray will disappear too. For example, I have a file open, with a list of files, the screen flickers, the solution of problems and some of the graphics and icons disappear or are corrupt. So if I move my mouse over the names of files, they go back to the right size and resolution. So I might end up with half of the text to the right size and the rest all messed up.

  I use Windows 7 Ultimate SP1 on a Toshiba Satellite T110. I recently updated the driver of the CPU, Chipset, and I see that I have enough RAM. I deleted the software, run virus scans, malware scans, registry scans, lower resolution and changed the display settings and Windows Update, but it still happens. As I said, it happens randomly enough, it'll be fine for a while, and the only constant I can see, it's that happens when I use Windows Explorer. Any ideas on what to do next?

  

  

  Usually after installing a chipset driver a restart is required, so it may of happened after I installed the driver but should not happen after a restart or the next time you turn on your computer.

  J W Stuart: http://www.pagestart.com

• Screen resolution changes automatically

  Hello, I just installed Windows 7 Home Premium in my Toshiba Satellite M200 Notebook 2 weeks. And it seems that I have a problem with my VGA (Mobile Intel 965 Express Chipset Family).

  Sometimes, when I am trying to boot up my laptop and Windows displays the login screen, my screen resolution change to lower resolution. After login, the problem remains the same more Windows to disable Aero. But if I restart my laptop, the problem disappeared. It seems impossible to load the VGA driver during Windows startup.

  I already re - install the VGA driver (had 8.15.10.1912 version of Windows update), also install driver latest Intel yesterday (8.15.10.1930) but they have the same problem this morning. I never had this problem with Windows Vista.

  In addition, in my startup program, I only charge 5 applications: Kaspersky AV HD Audio Control Panel and Intel 3 program (shortcut icon from the bar and screen resolution utility)

  Any help will be appreciated.

  Hello Cliffflip,

  Thank you for your message.  If you want to completely remove Kapersky from your computer, click HERE.  You will need to download/install/run their removal tool.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Screen resolution changed with updates

  I just stop my laptop and he proceeded to make updates. After the updates, it changed my screen resolution and I can't get it back. I have a 3 month-old HP G56, someone knows how to fix this? I tried to change the resolution of the screen in the control panel and it always looks weird. Thank you all

  Suggestions:

  1. set the DPI

  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  2 do a system restore, back to the date BEFORE the updates of windows that your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Note: change your windows to MANUAL updates.
  After the restoration of the system, the same windows updates will reappear.
  Install them one at a time. Check on the screen. If ok, install another, check on the screen, and so on.
  In this way, you will know for sure if the updates are the culprites.
  If know you that the updates is the culprite mark down its KB # > doing a restore of the system again > when updates will reappear again, right-click the update incriminated > click Hide

  Go to the Windows Update section, ask a question about this offending update.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• screen resolution changed by itself and everything is HUGE!

  icons, task bar, arrow are inflated like 5 times its original size. How can I fix it?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• screen resolution changes now too big to operate pop-up menus

  With the latest windows vista (Home premium), update my screen resolution has changed. When you try to restore

  the resolution that I had changed the DPI to 150% and reduced my screen resolution to fit the screen so

  make the size of the image is now too big for exploitation (the mode buttons are not visible) of drop-down menus

  Is it possible to change the resolution of the screen and or the DPI without the pop of the menus so that I can change

  the resolution of the screen or adjust the DPI?

  With the latest windows vista (Home premium), update my screen resolution has changed. When you try to restore

  the resolution that I had changed the DPI to 150% and reduced my screen resolution to fit the screen so

  make the size of the image is now too big for exploitation (the mode buttons are not visible) of drop-down menus

  Is it possible to change the resolution of the screen and or the DPI without the pop of the menus so that I can change

  the resolution of the screen or adjust the DPI?

  Set the DPI to 96.

  This tutorial shows you which resolution setting, your monitor must have:
  http://www.Vistax64.com/tutorials/84291-screen-resolution.html

  In addition, refer to your user manual to see which is the "recommended" resolution for your computer.

• Screen resolution reset after plugging in the tv

  A month ago, I plugged my Dell Inspiron N7110 with Core i5, on TV using HDMI cables, the computer prompted me to change the screen resolution of 1600 x 900. I think the original was 1280 x 720. Now, he won't let not get back together with making my screen is really small and I have the flashing in menu boxes (I can hardly read, they Flash so fast) and my computer will not pages refresh, I have to do forced refreshes. I deleted the cache and still do, but the problem is getting worse. I use the Safari browser and microsoft security essentials. One had it wrong before or know what is causing all this trouble?

  Unfortunately none of them worked. My driver is Intel HD family family, was not microsoft Basic. The second suggestion, even happened as when I do it in the menu screen resolution box, my screen is shrinking. It was before the connection to the TV and full screen on a lower resolution.

  Thanks for all your suggestions H.A.V. Aravinda, we appreciate it.

  Thanks for the update...
  Have your tried to update your existing video/chepsit drivers?

  Download your video driver and the most recent update and let us know the results
  http://www.Dell.com/support/drivers/us/en/04/product/Inspiron-17R-n7110

• currency of the row has been changed after cancel create and return to the call of workflow

  JDev 11... 2
  I have two workflow set up very similar to the task of Steve Muench and you will receive. I have master / detail in two tables on a navigation page and a different workflow that create/change for the master and detail (separately). When I create a new master, everything works well except that when I cancel and return to the appellant task, I get the "currency line has changed since the user interface has been made." The cancel task-flow-return has end transcation = rollback and restore savepoint = true and Cancel button immediately a = true. Looks like the controller looking for the newly created folder that has been rolledback. Given that this seems to be a model common vey, what is the best way to not show the warning?
  
  Thanks a lot for the pointers.

  Hello

  the usecase of yours is the standard demo I show for the workflow and I never had this problem. One reason might be that you keep the scope of the task flow DC to share instead of isolated, in which case restoring impact on the flow of both. If you want to keep shared DC then check that you return to method activity that is re - running the battery for the parent workflow

  Frank

• Screen resolution changes in Adobe opening program

  Can someone tell me how to prevent software (in this case, Adob
  e prime elements to change the resolution of the screen

  Hi lyrical64,
   
  have a. you been able to use adobe without any problems on your computer as soon as possible?
  b. Since when are you facing this problem?
  c. recent changes made to your computer?

   
  I suggest to turn off UAC (user account control), then reinstall the adobe program.
  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off 
   
  If you are still having the same problem then, you can perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
   
  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.
   
  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
   
  You can also check if the problem persists in safe mode and post back with the status so that we can help you better.
   
  To use the safe mode option, follow these steps:
   
  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• NVidia Tecra M7 resolution changes after waking up

  When my Tecra M7 is open after standby or hibernation, the resolution switch to 1024 x 768. SOMETIMES it changes automatically to 1440 x 900 after a few seconds, sometimes it doesn't. If all the seconds time or so I have to manually adjust the resolution again.
  OS: Windows Vista Business
  Video: nVidia Quadro NVS 110 M, pilot 7.15.10.9813
  BIOS: 3.20

  No I think it is a driver related problem, so it should be solved with the newer bios/displaydrivers.

  If it s really software related, then M$ should have a fix or something else, but then users will have to watch the M$ Database.

  Welcome them