Latitude E6400 taken helmet does not

Similar Questions

• BlackBerry Z30 taken helmet does not

  I bought my direct Z30 from blackberry.com on August 12, 2014. The audio Jack has recently stopped working. Clearly, this is a mechanical problem. Headphones and audio cable for radio show the same failure, and I can feel that the cable is not connected with a nice "click" as they did originally. Is it possible to get it repaired, or do I just use Bluetooth?

  Use canned air to clean the lint on the headphone jack. I saw fluff compacted down to the bottom of the plug which will prevent the headset to connect properly. If you turn off the device you can carefully dig out the lint with a paper clip or similar, but be very careful that you do not damage.

• Latitude 6430 - internal microphone does not work do not

  Hi, I am trying to get my internal mic work. Speakers work fine btw.

  I installed the latest drivers and when I look under recording devices I see only 3 devices:

  -Mic dock (IDT High Definition Audio Codec)

  -Jack Mic (IDT High Definition Audio Codec)

  -Rec. reading (IDT High Definition Audio Codec)

  (as in this screenshot from another thread: http://en.community.dell.com/cfs-file.ashx/__key/communityserver-discussions-components-files/3517/7801.screenshot.png )

  Shouldn't there be something like a "Microphone Array"

  More info: I am running Windows 8.1 and the laptop does not have a webcam. I show offline and disabled devices.

  Thanks in advance, Kai

  I have a Latitude E6500 laptop, running Windows 7 and that's how I activated the internal microphone:

  Panel--> Sound--> recording (tab on top)

  In the rectangle showing all the microphones that are currently turned on, if you do not see the internal microphone (or Mic/Line In, etc.), click R to bring up the menu that gives you the option to display disconnected and device off and check both.  The internal MIC is displayed. R click on the rectangle and set it as the default device, and if you want to use it for Skype, Google Voice, etc. Set it as Default Communications Device.as well.

  I don't know if it works on other Latitudes or with other Windows operating systems.

  Let me know if it works for you.

  PS

• UZ2315Hf helmet does not

  Dear team,

  Since I bought the UZ2315H monitor that I have not found a simple way to make the headphone jack works. Specifically, the headphone jack does not sound to any helmet or meets any microphone a headset/microphone combination, I tried.

  The rest of the screen works perfectly in all combinations - camera, speakers and microphone - in HDMI and USB 3 connection. When I insert a headphone jack, that nothing is happening, just monitor continues to put sound on the speakers and meets the microphone monitor only. No sound headphones any device I assign as audio device and microphone device make up the operating system.

  I called the customer service of Greece on the phone once, a few days after purchase, but received no usable information. They just asked me to send them my written request.

  Model: UZ2315Hf
  Serial number: CN-04FNJT-72872 - 43Q - TFP

  Revision A00

  Driving on HDMI by a Sony VAIO laptop computer VPCSA2C5E, SA

  Windows Pro 8.1 64bits

  Tested on several video cards, including the AMD Radeon HD 6630 M and Intel HD Graphics 3000

  1 HDMI and 1 VGA video ports on the laptop are

  Using the output HDMI form Sony HDMI (MHL) 1 in

  Using the delivered original Cables HDMI and USB.

  The resolution is 1080 p

  Purchased on www.computeruniverse.net

  Nope. Get it exchanged. The replacement will be rehabilitated if, outside the first 30 days of the date of delivery of Dell.
  * Back to the top of this Forum to monitor
  * Open, "My 24" or more small monitor does not have a Service tag? »

• Laptop HP Pavillion: helmet does not connect properly

  My headphones are headphones Bose-type normal with a four-pin connector, but it keeps very easily disconnect the headphone hole in my new HP Pavillion notebook with a notification saying "you just unplugged a device to the audio input jack.

  Microphone of the headset also does not appear anywhere and it will not let me use it.

  Do you have any suggestions on how I could solve this?

  Thank you

  Hey @adma1,.

  Right now, I would call in support see if taking is maybe defective. Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP.

  If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• Satellite A210: taken micro does not work after installing Vista SP1

  After you have installed SP1 for Vista, had a number of problems and the head is a main & mic Sockets is more work in front of the computer.
  So cannot use Skype etc.

  Any help appreceated

  Bill

  Train from my own experience the SP1 is not fully compatible with the various drivers.
  In case you looks that the audio driver does not work with SP1.

  Don t know what sound card you have (maybe Realtek?), but a sound card driver update would be desirable.
  If it doesn t help you will need to wait until it comes out an update of the audio driver

  CU

• v5-131 Acer helmet does not

  Headset does not work with my new Acer v5-131.  What I need to adjust a setting somewhere or it could be a problem of harrdware?

  Thank you!

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Win 7 Install - helmet does not

  I just finished installing Win7. Everything seems to work fine EXCEPT the helmet. Already with Vista I just plugged the headphones into the Jack of the computer and it could intercept the audio and play in the headset.

  Now when I plug the headphones into the Jack, nothing changes, I still get sound through the normal speakers. When I go in the Audio Mixer Panel and select device headphones, properties and run the test of the headset works fine.

  I'm trying to use the headset while you watch a movie from Netflix. With Vista, it wasn't a problem. In addition, the headphones do not work with CD and or any other audio support.

  Additional information: when I switch off the speakers, Realtek Digital Output all sound is achieved through the headphones and they work fine. Looks like a lot of extra clicking but just to use the headset.

  Hope this info helps.

  Thanks again Jason.
  Roy

  Realteck has published new drivers Win 7 lately. There are settings in a driver for Win 7, that allow you to choose between speakers and its independent and mutual for headphones.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Dell inspiron 17r helmet does not connect

  Pretty much what title says. I plug in my headset on the laptop, and they do not work. I reinstalled the drivers from the dell site. Problem remains. Anyone know what else to do? It will help if I uninstall the drivers from dell (thing audio dell) and install the realtek drivers?

  I had the same problem with my Inspiron 5520 a few days after I bought the laptop, I do not know, I had installed the drivers but no audio headphones, connected several headphones, not worked, dell has made Diagnostics at the start several times, opened the page of the bios and looked around different options, redemarrees and voila , I got audio through the headphone jack. don't know really, maybe all this reminded the laptop that he has a helmet too :))

• Satellite C850D - 12L - taken headset does not work

  The major players are working well, but there is almost no sound when I plug in my headphones. I put the volume to 100% to hear anything and its only the left side fate. The right making a noise clicking / tapping repeated.

  My headphones work fine in other devices, and I tried several pairs in this laptop only to get the same result.

  It is really plugged in all the way.
  The sound worked fine until today and I've had this laptop since January.

  The purpose and the content of your ad are confusing me.
  > Main speakers work well, but there is almost no sound when I plug in my headphones.
  Normally when you use headphones, speakers should stop working and you should hear his helmet only. After you unplug the headphones built in speakers should work again.

  > I put the volume to 100% to hear anything and its only the left side fate. The right making a noise clicking / tapping repeated.
  Is what is happening with headphones when you plug it into the headphone jack?

• Satellite L305D-S5879 - made helmet does not recognize the headset

  Had this problem for some time, called customer service, but their methods were not working.

  When I plug my headphones into the socket the continuous sound to fate of the speakers. I'll go into the sound settings, and it is said that the headphones are connected, but the sound continues for fate of the speakers.

  Everything that can be done to solve this problem?

  Hello!

  It's strange and I can't say at the moment what is the reason for this problem.

  First of all, you should try to update the BIOS and audio drivers. The two you can find on the Toshiba site:
  http://www.CSD.Toshiba.com

  Did you install the laptop with the recovery disk or Microsoft?

  Good bye

• Y700-15isk helmet does not properly

  It just started last night, but when I plug headphones into the headphone jack, audio is mostly just through the left ear, with the right ear is barely audible. If I turn the volume way upward, it seems normal to the ear right, but obviously much too strong, from left to right. I tested with several different pairs of headphones that all work properly in other devices, but not in the Y700.

  Anyone have any ideas on what is happening and how to fix it?

  I uninstalled the driver, rebooted, and it worked again. Weird that I didn't have to reinstall but. (It still appears in the device under "Realtek HD Audio" Manager)

  Thank you!

• Why only a helmet does not work when plugged into my macbook pro?

  I have a macbook pro 2012 middle and when plug my headphones in the headphone plug-in, and only the left earpiece works. Ive tried several types of headphones, all with the same result and then tried in my iPhone and they work fine. Any suggestions would be greatly appreciated!

  The sound balance is set in the sound preferences, right (in the Middle, I mean).

• Bluetooth headset does not appear in the control panel

  I try to use my bluetooth headset.  It is paired with success and it seems in the window bluetooth devices.  However, it will not work.  I looked in the sound control panel and the helmet does not appear.  This use to work, but stopped.  How do I add the bluetooth headset icon in the sound control panel so I can choose it as audio device by default?  I uninstalled and reinstalled the device several times.  I also have a bluetooth mouse and it works fine.  There is no other bluetooth devices.  I use Windows 7.

  Thank you

  Hello

  I suggest you to update the driver for your Bluetooth device.

  Method 1:

  I suggest you go through the steps and check:

  (a) Control Panel

  (b) sound > manage Audio devices

  (c) set by default

  See also:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Method 2:

  Step 1:

  To change the audio device by default:

  (a) click the Start button

  (b) type 'Change sound card settings' or ' manage audio devices'.

  (c) click the link with the same name.

  Step 2:

  An alternative is:

  (a) right click on the sound icon in the Notification area

  (b) select "Playback devices"

  (c) a new window called Sound, opens.

  (d) in this window, you will often see the audio devices for playback, which are currently present in Windows 7.

  (e) select the device you want to set as the default value and

  f key) click on the default value .

  (g) click on OK to save the current configuration.

  NOTE: the default selected device will be used by all of your programs unless otherwise stated.

  Set Default has two options: Default Communication device that manages all communications like the calls or videoconferencing on IM or VOIP, and default device that manages all the output is without the communication part.

  To choose the device that should be the default value for the communication and device that should make the rest of the book,

  Method 3:

  (a) click on the small arrow button set as default.

  (b) If you click it, the arrow will show you both options.

  (c) Select the communications device.

  (d) click on set as default -> default Communication device.

  (e) select the device for all other types of reading and

  f) click set default-> default device

  (g) If you want the device of Communication by default and the default unit will be defined on the same audio device just click on the button set by default instead.

  Reference:

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

• USB headset connected to PC speech recognition does not work

  * Original title: can not make headphones work

  I installed a software that involves speech recognition.  I plugged my USB to the PC headset, but when I tried to use Set Up microphone in the control panel / recognition speech nothing works.  I have connected the headphones to an other PC Win7 and it works perfectly, in fact I could stop using a keyboard.

  I reconnected the headset with the first PC and still nothing happens, but I see a message saying "recognition speech could not start checking the Audio devices and sound themes".  I can't find it.

  I looked in devices and printers in CP and found the helmet (C-Media USB headphone set) when I look in Properties / General there is a message "device cannot start (Code 10)".  When I check the driver tells me that the driver is up-to-date.

  When I shut down and restart the PC with headphones connected to a USB port on the front of the PC, I hear a small amount of Crackle, but nothing else.  As I have already said, there is a message on the office, 'recognition speech could not start. and "speech recognition could not start checking the Audio devices and sound themes"

  I have run Windows Update to see if there is an update there, but it makes no difference.

  How can I talk to my PC using my headset?

  Thank you

  Tregarth

  I tried 2 different USB ports on the front of the PC, no improvement.

  I also looked into devices and printers (in Control Panel), the helmet does not show.  Also, when I look in device in CP Manager there is no exclamation point in audio, video and game controllers.

  Usually, the front USB ports are connected by cables (often not armoured or not) to the USB controller in the back of a box of the desktop computer. If you haven't tried a rear USB port, please do. If your laptop no matter what USB port should be good.

  You cannot control Audio through devices and printers. You don't say what version of Windows you are using. If you use a version of Windows with a bottom taskbar, RIGHT click ON the speaker down icon to the right of the taskbar. Select the recording devices. This will open the acoustic window. You should see a USB microphone in the list. See screenshot below. Highlight the USB microphone and set it as the default. This should solve your problem.

  Marty