Layer mask not 100 percent

Similar Questions

• using adjustment layer mask not paint it white to reveal the adjustment

  I added the adjustment layer for the image, changed to black with the white foreground color I am unable to reveal the adjustment

  

  Should not be a problem. Check your brush Blend Mode in the Options bar

• Eraser tool does not work for the black layer mask

  I'm trying to put a black layer mask and use Eraser tool to change.  Unfortunately the Eraser tool does not.  I'm not knowingly do anything differently that I did in the past.  Recently, I did a round of software updates for CS6.  I was wondering if anyone else is experienceing this and if there is a solution?

  Verify that the in the Toolbox foreground color is set to black. (in front of when using the Brush tool)

  Press D, and then press the X key.

  And opacity and flow are 100%.

  Most people use the brush on the layer masks and you might find that works better.

• Paste an image into a layer mask does not work even after several approaches

  I can't paste an image into a layer mask. I tried to keep 'option' by clicking on the layer mask (to activate the white), then "Control + V" to paste the image but it still places the image in a new layer. I tried to paste through the Palette layers without success (pasta in a new layer). I tried to use past special from the Edit menu, but the past command is grayed out. Any ideas for why it does not work for me?

  I tried to keep 'option' by clicking on the layer mask (to activate the white), then "Control + V" to paste the image

  Did you select > all and edit > copy the image you want to put in the mask?

• Layer mask does not work correctly.

  My normal layer mask does not work correctly.  When I click on add a layer mask, I get this instead.  I change a setting by chance?  He won't let me see where my traditional black and white mask.

  

  Hello

  In the layers panel, click the dropdown menu, click on Options in the Panel and select one thumbnail size other than None.

  

• CC 2015 Photoshop layer mask does not?

  I've recently updated to CC in Photoshop, but I have problems with layer masks, I created the mask layer, and when I paint with my black brush, it does not block the area completely, it will leave the remains of the image essentially, it leaves an opaque shape. I check that my brush is set to normal and my layer is set to normal. I have reset the brushes, I tried implementing new photoshop documents, but it makes no difference. Can anyone help please see the example below, the Red is a layer below the layer of the image that has applied the layer mask.

  

  Reset preferences: opt-cmd-shift at the start of the PS.

• layer masks work does not correctly

  Help

  I use the layer mask, and all my settings are correct. The brush still shows the image, even if I'm brushing the image. What is going on?!!!

  Hello

  I was able to understand this madness.

  If you click color, and then click on the sliders in grayscale. You will see if your black is 100%. Which fixed the problem on my end. thanks for all the advice.

• White color on the layer mask does not

  Well, I have a problem... Each setting is fine, but when I open the layer mask on a layer, and if I have the black brush, it works very well, BUT if I brush white, it does not work. It's like the color white is on 0% opacity. It shows me an action in "history, but it's like I'm not even brushing."
  Now, when I want white brush, I switched layer mask, brush black and then I reverse again, because as I said, the white color just doesn't work...
  -Colours btw, work not in a layer mask

  Is the Mode in the Options bar to brush on something other than normal?

• PS Do not work - refine edge window - CS6 in the output of 'Sélection' and "Layer mask" Section

  Hello

  I have Photoshop CS6. In the window edge refine, in the Section of output for some reason any I'm not able to choose the options 'Sélection' and 'layer mask. They are removed and cannot be clicked.  How can I fix? Help, please. I tried and looked EVERYWHERE. Thank you!!!

  ~ Perdriel

  

  Uncheck decontaminate colors

• Listener code to add a layer mask does not work...

  With the help of Photoshop CC 2014 with all updates. The following script listener code has been saved when I clicked on the button, add a layer mask to add a mask to the active layer. When executeAction is called the script fails with the following error message. Help! How can I add a layer mask to the layer? Thank you.

  : Error General Photoshop. Maybe this feature is not available in this version of Photoshop. -The command 'Make' is not currently available.

  function addLayerMask() {}

  Adds a layer mask to the layer by clicking on the

  Add the button layer mask.

  var idMk = charIDToTypeID ("Mk");

  var desc23 = new ActionDescriptor();

  var idNw = charIDToTypeID ('Nw');

  var idChnl = charIDToTypeID ('channel');

  desc23.putClass (idNw, idChnl);

  var idAt = charIDToTypeID ('At');

  var ref20 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idMsk = charIDToTypeID ("Msk");

  ref20.putEnumerated (idChnl, idChnl, idMsk);

  desc23.putReference (idAt, ref20);

  var idUsng = charIDToTypeID ("Usng");

  var idUsrM = charIDToTypeID ("rocket");

  var idRvlS = charIDToTypeID ("LVR");

  desc23.putEnumerated (idUsng, idUsrM, idRvlS);

  executeAction (idMk, desc23, DialogModes.NO);

  }

  This code works if you have an active selection.

  function addLayerMask() {}

  Adds a layer mask to the layer by clicking on the

  Add the button layer mask.

  var idMk = charIDToTypeID ("Mk");

  var desc23 = new ActionDescriptor();

  var idNw = charIDToTypeID ('Nw');

  var idChnl = charIDToTypeID ('channel');

  desc23.putClass (idNw, idChnl);

  var idAt = charIDToTypeID ('At');

  var ref20 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idMsk = charIDToTypeID ("Msk");

  ref20.putEnumerated (idChnl, idChnl, idMsk);

  desc23.putReference (idAt, ref20);

  var idUsng = charIDToTypeID ("Usng");

  var idUsrM = charIDToTypeID ("rocket");

  var idRvlS = charIDToTypeID ("LVR");

  desc23.putEnumerated (idUsng, idUsrM, idRvlS);      reveal selection

  executeAction (idMk, desc23, DialogModes.NO);

  }

  app.activeDocument.selection.selectAll ();

  addLayerMask();

  To add a layer mask without an active selection is the scriptlistener code you would need

  function addLayerMask() {}

  var idMk = charIDToTypeID ("Mk");

  var desc25 = new ActionDescriptor();

  var idNw = charIDToTypeID ('Nw');

  var idChnl = charIDToTypeID ('channel');

  desc25.putClass (idNw, idChnl);

  var idAt = charIDToTypeID ('At');

  ref19 var = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idMsk = charIDToTypeID ("Msk");

  ref19.putEnumerated (idChnl, idChnl, idMsk);

  desc25.putReference (idAt, ref19);

  var idUsng = charIDToTypeID ("Usng");

  var idUsrM = charIDToTypeID ("rocket");

  var idRvlA = charIDToTypeID ("RvlA");

  desc25.putEnumerated (idUsng, idUsrM, idRvlA);  reveal all

  executeAction (idMk, desc25, DialogModes.NO);

  }

  addLayerMask()

  There are once again hide all

  var idMk = charIDToTypeID ("Mk");

  var desc33 = new ActionDescriptor();

  var idNw = charIDToTypeID ('Nw');

  var idChnl = charIDToTypeID ('channel');

  desc33.putClass (idNw, idChnl);

  var idAt = charIDToTypeID ('At');

  var ref27 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idMsk = charIDToTypeID ("Msk");

  ref27.putEnumerated (idChnl, idChnl, idMsk);

  desc33.putReference (idAt, ref27);

  var idUsng = charIDToTypeID ("Usng");

  var idUsrM = charIDToTypeID ("rocket");

  var idHdAl = charIDToTypeID ("HdAl");

  desc33.putEnumerated (idUsng, idUsrM, idHdAl);     Hide all

  executeAction (idMk, desc33, DialogModes.NO);

• Layer mask works not properly on CS5

  Hello world

  I had this problem for a few days and still have not found a solution.

  
  

  Here's what happens: my layer mask has suddenly stopped working properly. Even if all properties are set to the right, the result of mask is sort of bland bland of the thing.

  
  

  
  

  No one knows what might happen?

  Thanks to you all.

  Have you done that in striking D and X?

  As CS5 already has the properties panel where you can change the density of a layer mask?

  

• Black brush on the layer mask works not. Please help.

  I have been using CS6 for some time now.  6 CS decided that I can't use my black brush on a white layer mask. Not at all. I can use that white on a black mask, but not black I.  I restarted the computer, but I'm annoyed. Anyone have this problem?  Solutions?  I'm so over my head with photos at the end... It would be my great weekend to night work.

  Look at the Options bar. Is the brush in Normal blending mode?

• Choice of adjustments CS5 is not automatic pop-up layer mask

  I'm new to Photoshop (CS5) and do not see the auto-hide layer appear when I choose Control Panel settings (I have to create one in a separate step). Is the automatic function something I need to turn on?

  Do you mean that a layer mask is not added during an adjustment layer in the settings panel?

  If so, check the mask adds by default in the settings panel flyout menu.

  

• Layer mask does not properly clear?

  something is wrong w my layer mask. I maybe had clicked on something while doing some graphic but I'm pretty sure.

  When clear it was beautiful,

  

  the problem is when I want to recover the pieces that I deleted. It becomes translucent (or less opacity) rather than its original T ^ T

  If someone knows how to fix this please tell me! I use layer mask forever and I always use it, this isn't the same without it working properly T ^ T

  

  My first idea, see these differences: black and gray?

  Have you applied with a gray brush and the other with a black brush?

• Paint on layer masks does not work?

  Hi, I'm working on a work of Digital Art classes... Deadline tomorrow, I left it quite late because I knew what to do, and he was out in my head on how to do it. And behold, I encountered a problem with paint on a layer mask.

  I did a form (Magenta, so I know I paint on the correct layer) and have selected layer mask, but when I try to paint black on it to give it a bit of shading is as if she is wiping out so I can see the layer behind it, even though I see that it is indeed drawing anywhere in the mask layer in the layers panel anyway?

  Until something happens, I'll just go try and find an alternative

  (Photoshop CS6)

  

  Any help is appreciated!

  Painting on the layer mask with black going to 'clear' of the image.  That's the whole point of a layer mask.  If you want to shade it (non-distructively) then create a new layer above that layer and hang it on her, pressing alt/opt clicking on between the layers in the layer panel.  Then you can paint black on the new layer, and it will be displayed only when the lower layer's pixels.  You can then change it without messing up the base layer.