LCD issue

Similar Questions

• Lenovo T410s LCD issue

  I have a problem with my LCD on Lenovo T410s. Everyting worked good so far. Today, I wanted to check another LCD for this model that I've got. So I dicsonected the LCD original and connected to another to check. After having seen that the other has worked well, I disconnected it. Then I reconnected the original and the laptop. Unfortunately, when he started, the screen has no shining good – it is very dark. I disconnected that and back I tried the second LCD, but here again the other shined very bad. Can someone tell me what could happen? It seems that the inverter is damaged, but I don't know where is that within this model. Please give me some advice

  My guess is that you skipped a fuse on the motherboard.

  There is no converter as such since it's led lighting panels.

  Good luck.

• T61 LCD issue

  
  

  I suggest you download the HMM (the hardware maintenance manual) for your laptop. Not sure about your T61, I know that the T530 has a separate cable. I had a failure in a similar way as the description of your problem on my mother in law T530. I bought Qty 4 T530 of last year and was the only one to fail during the warranty. Lenovo has replaced the LCD and card system twice under warranty and that did not fix the problem. It was the cable. I usually buy used and tested good parts from sources other than Lenovo. More recently, I bought a DVD player for a T42 for $7.99 free shipping off eBay.

• Acer Aspire 3680 LCD issues

  I just replaced the LCD on my Acer Aspire 3680 and I see the light from the screen to the top, but nothing else. Can someone advise me what can I hurt?

  Hello

  1. what exactly is the problem you face?

  2. are you able to boot to the desktop?

  3. What does ""I can see the screen light up, but nothing else ' mean? "

  Please provide more information to help you best.

  How to ask a question
  
  http://support.Microsoft.com/kb/555375

• Monitor LCD issues

  On my Dell Inspiron 5520, I had to replace my LCD screen due to the damage caused and bought and replaced by part number who gave and purchased from an outside source. Installed and all was good. Now no matter what I set the settings, everything is tiny, to connect to the internet. The graphics are blurred and so tiny. I set it to 150% only to see.  When I look at my device manager it just says generic pnp monitor

  I need help.

  Hi Tracey,

  1. What is the default DPI that you use on Windows 7?

  2 are you referring to external screen LCD monitor or laptop LCD?

  3. What is the resolution of the screen on the computer?

  There are several reasons why view on Windows 7 may not work correctly. Follow these methods and check if that helps:

  Method 1:

  Windows uses a technology called ClearType to create more readable on the screen text. On some monitors, you might want to turn ClearType on or off, or need to adjust it. For more information on the start-up and adjustment of ClearType, I suggest you to refer to these Microsoft article and check if it helps:

  Make the text easier to read using ClearType

  http://Windows.Microsoft.com/en-in/Windows7/make-text-easier-to-read-using-ClearType

  ClearType: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/ClearType-frequently-asked-questions

  Method 2:

  If the problem persists, try uninstalling and reinstalling the latest graphics card drivers and check if it helps:

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-15R-5520

  Also, see this Microsoft article and check if that helps:

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• Satellite P30 - screen got vertical stripes

  Hello!

  Two problems:

  1. my Satellite P30 becomes a little old (bought in 2005), I know, but it works really well - a few hiccups of course.
  However, the lines of different colors appear vertically on the screen. It started with a single line of a few months ago and right there are now seven (10 at the most).
  The odd bit is that they appear, disappear, and reappear - some more often than others.
  I find it quite strange, and I wonder if the problem is the screen itself or if it is a motherboard / other hardware or a software problem.

  2. commissioning is slow lane. Suddenly, there is (before tha line problem described above) about four months something has changed in the startup routine.
  Before, when the "Welcome" message was shown, the screen became blavk for a second, and office appeared with the bar of tasks and shortcuts emediately. As usual.
  But some time back the time according to 'Welcome' to the desktop was OK, changed its jst a fww seconds to THREE minutes! I checked my pc for all known problems, but nothing! What is going on? The image of the desktop appears, and then three minutes before the taskbar and icons appear.

  Can someone help me?

  Best regards, Lars of the Norway

  (1) what are the lines? If these are lines of pixels, and the lines are spaced randomly, its most likely a LCD issue.

  (2) download and run BootVis. This small utility from Microsoft saves driver delays and other things during the startup.
  Download and Instructions can be found here: http://articles.techrepublic.com.com/5100-10878_11-5034622.html

• Green vertical line on monitor on Satellite A80

  I have a SA 80 127. Is it 1.5 years.
  Recently, a bright green vertical line appears on my monitor; Looks like a LCD issue.
  Does anyone have clues that I have to do?
  Thank you...

  Best
  knockaert

  To be 100% sure test with external monitor. If this line is displayed on LCD only you should contact the service in your country. If the display is faulty, it should be replaced.
  The warranty is still valid?

• So my T400 might have exhausted all 9 lives...

  A month ago, I tried to fix the lock on my T400; the left side closed automatically once the lid closed. In the middle of disassembly, I forgot which screws to take off. I went home with my screwdriver and eventually remove the screws for the rails of the LCD in place now. Ultimately, it happened that the Panel broke the lid and faceplanted on the keyboard. Reassembly, I discovered to my dismay that the backlight didn't; There was no visible light emanating from it, even if the image was perfectly fine.

  At first, I thought it was the LCD issue and having ordered and replaced the Panel without result (no backlight, visible image), I noticed that the connector 40pin for the LCD cable has been damaged (angle and two missing pins). So I ordered a piece of replacement of parts of IBM in Toronto.

  The new cable came, and much to my displeasure, seemed to be the right size for my T400 despite all the required documents. However, I installed the new cable and a new LCD Panel. Still nothing; no backlight, just an image.

  From there, looks like the problem is with the motherboard, power supply to the lighting parts; everything else works great, I used it for the past month, hooked up to an external monitor.

  So my question is: what are the chances of that third-party motherboard repair shops (repair, not replace) will be able to fix the problem?

  (Also, if spare parts IBM sent me my T400 properly installed or do I have to take issue with them?)

  Ultimately, it discovered that the motherboard was damaged as well as the LCD screen. Because I was out of warranty, I opted for the motherboard repaired rather than replaced and put in the LG Panel I bought after walking.

  However, I noticed that they do not have the original live back in many places, what irks me a little.

  As a side note, I think I preferred the Samsung on the LG screen it is more difficult to calibrate and whites are indeed less white than on the Samsung.

  Thank you!

• My screen has a vertical yellow line that will not disappear whenever my laptop dv7t is powered on.

  1. product name and number:

  HP Pavilion dv7 Notebook PC

  A3F79AV

  2. operating system: Windows 7 64-bit

  3. error message (no)

  4 changes leading to the error: (none)

  5 description:

  A yellow line appears when I turn on the PC (most recently the case today).  The line appears on the chest and OS splash pages and above all content Office happens to be located underneath.  It extends to full height and is about 70 to 80 pixels from the right edge of the screen.  It seems to be 1 pixel wide - it is the same width as the lines in the box blue lassoo I get by clicking and dragging through the office.

  Because I have not seen this line interact with the operating system or application software, and it is in front of all the information are displayed, I'm guessing that it's a hardware problem on the LCD screen.

  Any suggestions?

  Thanks in advance

  Quick update to the original poster:

  I have discussed this with the HP technical support and they had me check that the line of pixels is in the BIOS screen as well.  It is as I suspected there is a LCD issue.  I can post the PC to get a new LCD in there.  You wonder why they can't replace it on the site (which I paid for).  Time to back up the hard drive...

• Issue of Satellite A100 - 159 LCD - Photo cut into horizontal pieces

  Hello

  For three days I have very strange problems with the LCD screen on my laptop. Imagine the normal image, cut it into horizontal pieces and place pieces randomly above the other.
  This 'strange' combination vertical rolls on the screen. A few minutes later, he stops and the screen shows me a gradient of one color.

  With a keyboard shortcut, the laptop is on stand-by. With the power on button, the laptop leaves Eve and the screen working again normally.

  It happens once or twice a day...

  An external screen works normal, while the LCD is weird, so I guess there is no problem with the graphics card. Can someone explain this strange behavior?

  One last thing, this laptop 13 months now, so I guarantee expired :-(.

  Thanks in advance,
  Jochen

  (PS English is not my native language, I apologize for the errors and I still think that Toshiba is the best :-)

  Hello Jochen

  According to your explanation of the problem it is probably problem with graphics card. Please understand that simply test with special tools can give you a definitive answer. I don't really know what is the best solution.

  Try to speak with service and ask how much laptop repair cost.

• Satellite A205 - LCD backlight issue

  My laptop LCD screen backlight seems well until recently have been the subject of a cutting.
  Every few minutes (though sometimes if I leave it alone, it stays on for a long time) the light goes out leaving just a small picture of what I was doing on my computer.

  Now, the real part of the confusion was that it seemed to bounce off if I opened and closed the lid several times, or sometimes when I had just long enough for windows to lock the power button.

  I have advanced and swapped for another inverter and the problem has diminished in many times it took place, but it is always the case... So, I'm totally at a loss for what it could be.

  Any suggestion or ideas would be appreciated! Thank you.

  Hello

  You have replaced the FL inverter, and always seems to this question?
  This strange because in my opinion, this sounds like a FL inverter and new s FL inverter malfunction should solve this problem!

  Maybe it's a display of s. problem could also be possible.

  However, I think you should check the inverter fl again...

  PS: have you tried to change the brightness by using the FN + F7 (increase) or (decrease) FN + F6?
  Check it!

• Sigma 17-70 2.8 issue with T6S - Liveview no video on LCD screen

  People,

  I need help. I just got a T6S and my Sigma 17-70 2.4 works very well except when I want liveview to try to use the video mode. Or whatever it is will display on the LCD. The lens works very well on my body T5i, including the liveview and video. My other goals seems to work very well on my two T6s and T5i for Liveview...

  Any ideas or help?

  Stilgar99

  Google is your friend.

  http://www.Sigma-photo.co.jp/English/new/new_topic.php?id=514

• change the display LCD R60 - compatibility issue

  Hello I need to change my 15 "R60 sxga display, as it is used is dying. After searching some information on screens thinkpad I'm confused. Thinkwiki mentions R60 has LG - Philips LP150E07, but I am unable to find such screen. So I wonder if LP150E05 (probably LP150E05-A2K1) of the N150P3-L01 of T43 T60 will work without problems. I have found that to replace poster may nequire the EDID Flash, but I don't know how I could do and where to find the needed firmwares. Could someone enlighten me on this?

  LCD for R60 will work in the T60, while the LCD from the T43 only works in the T60 with a mod EDID.

• Pavilion DV6915NR - issue of Board/LCD system

  I begin troubleshooting on a Pavilion dv6915nr, when you press the power button power LED, battery LED, the fan turns to the top, and light on the switch panel. the HARD disk LED flashes, no post beeps and a black LCD screen. I replace the motherboard and still have the same question. I tried to do a reset of the power (hard reset). still no change in the system. I pulled two DIMMS and received "no beeps memory" at the station. I get no video on internal LCD or external monitor. I swapped the LCD inverter with a well known ups and still no change in the system. I have not a spare known good LCD display for Exchange and test functionality. I wonder if the LCD panel itself is dead or if the new systemboard is degraded or DOA.

  Sean Doran
  A +, EASD
  Technician

  It was a design and engineering question which was never resolved by HP, this is what a person was doing to solve it, add a heatsink in copper between the chip and factory HP sinks, re - solder the chip if necessary.

  http://www.YouTube.com/watch?v=JEpnqhRYGLw

  http://www.YouTube.com/watch?v=bnkQNmKauEc

  Here's someone who does the same thing, only no video.

  http://CGI.eBay.com/WS/eBayISAPI.dll?ViewItem&item=260595095107

  Some sell copper heat sink

  http://shop.eBay.com/?_FROM=R40&_trksid=p3907.M570.L1313&_nkw=copper+heatsink+HP&_sacat=see-all-categories

  .

• M30-113: issue points of battery and LCD

  Hi all

  Satellite m30-113, I had recently several points began to appear on the screen, seven points can be distinguished and 14 points are so fine.

  Whenever I try to charge my cell phone, he gives her. They said that the battery could be defective.

  I'm still in my international warranty.

  Will I change my laptop, or I'll get my screen and the battery changed?
  My problem is that I can wait until it fixed because I have a lot of work with it, I live in Syria; and I want to know the maintenance procedure.

  Thank you for the care you

  Hello

  If there is any possibility to try to change the laptop. Talk with your local dealer or contact the Service partner and ask them what the best solution for your problem.

  Good luck!