LDAP configuration help

Similar Questions

• LDAP configuration problems

  Dear all,

  This is my first interaction with VCeneter Orchestrator and I am facing a problem in the configuration of the LDAP configuration. He expects the Strait for me but he said Dungeon "configuration Ldap registered successfully, but the configuration is wrong.»

  Connection error: LDAP successful but no users found. Check LDAP paths.

  Group Admin not found error

  I don't know what I did so wrong if someone could guide me to set this configuration in the right way.

  I entered the name of the domain controller and test the connectivity by using Telnet and everything was fine. Only the root using unique name format exported from Active directory using the DSQuery command.

  the resource used was VM_ Orc. configuration guide.

  Your accesnance is much appreciated.

  Thank you.

  Ahmed Salah

  For example, assuming that a field of acme.corp with all users in the default location and the groups in the default location, you configure the paths as follows. This example uses a group named 'vcoadmins' with the 'administrator' account a member of this group:

  Root: dc = acme, dc = corp

  User name: [email protected]

  User search base: cn = users, dc = acme, dc = corp

  Group search base: cn = users, dc = acme, dc = corp

  vCO Admin group: cn = vcoadmins, cn = users, dc = acme, dc = corp

  This help at all?

• LDAP configuration with vFoglight 6.5

  Im trying to configure LDAP services within our domain for use with vFoglight. My goal is to have a group operator and administrator group that uses our AD accounts instead of "local." I'm not sure if I have properly configure all LDAP settings. Can someone check my settings and let me know where can be the problem?

  Also under Administration > users & security management > user management > groups; The LDAP group button is grayed out. If the LDAP settings are correct this button will become live?

  Here are our settings:
  Account is anonymous. fake Unique name of the service account. Contoso . com\svc_acct password | **** LDAP query prefix | CN= Query LDAP suffix. OU = site, DC = corp, DC = contoso, DC = com The scopes to search for groups | UO = site, DC = corp, DC = contoso, DC = com The second space of group names. UO = site, DC = corp, DC = contoso, DC = com The third namespace group | "in white" The LDAP context for the user's search. UO = site, DC = corp, DC = contoso, DC = com Role attribute ID | name Is Role DN attribute | fake ID of user alias attribute | sAMAccountName ID of the attribute to search for groups | members Match the DN of the user. true JAAS LoginModule name | Security for JACQUES com.quest.nitro.service.security.auth.spi.NitroExtendedLdapLoginModule name field. FGL-web-console Group ID parent attribute | memberOf Attribute of the group to search for nested groups. members Maximum level of group nesting. 15 LDAP search time (milliseconds). 10 000 mode of research group | direct

  I hope that your problem has been resolved but support. You can also check our free training site: http://svgtraining.quest.com/ which has a video on the LDAP configuration.

• After the LDAP configuration cannot connect - ERROR: failed to connect vcloud use meter 3.2

  LDAP configuration page settings are as below: -.

  Host:-domain name

  port - 636

  Use SSL - verified

  username - DN [email protected]

  Password-*.

  Base DN of the user - OU = test, DC = test, DC = com

  User object class-

  User name attribute - sAMAccountName

  When I try to open a session using

  test. com\testuser or [email protected] it says ERROR: failed to connect

  and

  Cat /var/log/usgmtr/um.log--spectacles suite error -.

  Excerpt of ERROR [http-bio-8443-exec-1]. Authenticator: org.apache.directory.shared.ldap.model.exception.LdapInvalidDnException: ERR_04202 a value is missing on some RDN

  can anyone suggest what could be the problem

  Indicated user name is a UPN or Email address... not a DN.  DN resemble CN = test, OU = test, DC = test, DC = com.

  Please post the exact value of the DN using LDP or a similar LDAP tool against the LDAP provider to check the attribute for the metering login account.

  LdapInvalidDnException

• LDAP Configuration problem - BEEP in a deployment of OBIEE

  All,
  I have an OBIEE 11 g (11.1.1.6.0), including environmental BI Publisher put in place. I have successfully completed the integration of OBIEE with LDAP and LDAP ID user can connect you with the Group/privilege information is applied as announced. BI Publisher, however, is not so cooperative. Here's what I have:
  
  As part of the LDAP configuration, I replaced the BISystemUser id with a user based on LDAP, ADBISystemUser id. However, whenever someone tries to connect, they get the error message * "[53012]" user authentication failed: adbisystemuser "*." The BIP newspaper shows this same message, preceded by the message * "[nQSError: 43113] Message returned by OBIS." * I know with certainty that this user id is configured correctly - OBIEE users are able to connect, and my LDAP browser is able to connect using these credentials.
  
  At RANDOM, I have the Administration-> Security page configured as follows:
  
  Local superuser: enabled (this is the only way I can connect now)
  
  Authentication: authentication UNIQUE not selected; Use LDAP selected and the correct LDAP, id, password etc entered configuration settings.
  
  Authorization: security model = BI Server and the correct settings for this entry (entry in the installation, no change)
  
  
  I searched nQSError 43113 and 53012 and validated different suggestions I've seen without success. I can't tell you how many times I rebooted services. I have reset the GUID, verified passwords/accounts are locked out, tested and retested in BEEP passwords match those of LDAP. The only thing that worked (sort of), was when I jumped LDAP protocol for authentication and set up LDAP for authorization (3rd section on the Administration-> Security Page). When it is configured for LDAP, the BEEP was able to bind to LDAP and users could connect. Unfortunately, given that we were not BI server authorization, users could not see the folders, or they would avoid data sources or report objects. What do we have this test was to confirm that BEEP pourrait LDAP access. It is not the way I need to do.
  
  The last thing I tried was to adbisystemuser id in LDAP so that it lay in the same "folder" as all my users instead of a folder, separate service accounts. Even this was not useful. I implemented the XMLP * groups, even though I do not expect that these are referenced. The id adbisystemuser is a member of XMLP_ADMIN, and users have been added to the XMLP_DEVELOPER group, for what it's worth.
  
  Suggestions or recommendations on how to get the BEEP if authenticate to LDAP would be really appreciated!
  
  Thank you!
  Eric

  Eric,

  In my setup, I use Fusion Middleware as a model of security and everything seems to work.

  In the documentation model Oracle BI Server is Legacy only:

  5.2 integration with Oracle BI Server Security
  The security option Oracle BI Server is for customers who want to use the authentication of the legacy of 10g. This section does not apply if you set up Oracle Fusion Middleware security.

  Michael

• BEA WebLogic Server 8.1 IS an external LDAP Configuration supported?

  Hi all

  We have server BEA Weblogic 8.1, and we intend to add the external LDAP authentication to the web application deployed on weblogic.

  Is BEA Weblogic server 8.1 support external LDAP OmniPass?

  Please help me.

  Thank you

  Ankit Patel

  Hi Pierre,.

  Yes, we can include external services Ldab here.

  http://docs.Oracle.com/CD/E13222_01/WLS/docs81/secmanage/providers.html#1109511

  • Configure a new iPlanet authenticator...
  • Configure a new authenticator realm adapter...
  • Configure a new Active Directory authenticator...
  • Set up a new default authenticator...
  • Set up a new default identity Asserter...
  • Configure a new authenticator OpenLDAP...
  • Configure a new authenticator of Novell...

  Kind regards

  Kal

• LDAP configuration issues

  Hello world

  Using APEX 4.2, RDBMS 11 GR 2.

  I tried to configure for APEX to authenticate users in Active Directory after a certain number of messages in the forum but do not have the bees with success. Grateful if someone can help. Here's my server details (I replaced my server/domain with example.com):

  Domain: example.com

  The distinguished name (DN): CN = name, OU = HQ, OU = accounts, DC = example, DC = com

  sAMAccountName: case flast

  I used the above DN string to authenticate by using the simple_bind_s function in the DMBS_LDAP package and works very well in the workshop of APEX SQL and SQL Developer.

  I tried in the APEX by specifying in the field DN with the following, but it doesn't work:

  CN = % LDAP_USER %, OR = HQ, OU = accounts, DC = example, DC = com

  Also tried in the APEX of what follows as well but still does not work (as suggested by some posts):

  example % LDAP_USER %, OR = HQ, UO is user accounts, DC = example, DC = com

  Example\%LDAP_USER%,ou=HQ,ou=User accounts, DC = example, DC = com

  Example/%LDAP_USER%,ou=HQ,ou=User accounts, DC = example, DC = com

  CN = example % LDAP_USER %, OR = HQ, OU = accounts, DC = example, DC = com

  .. and many more variations

  Also tried this

  http://www.grassroots-Oracle.com/2013/09/using-LDAP-to-authenticate-your-apex.html

  and this

  http://ruepprich.WordPress.com/2012/11/02/LDAP-authentication-with-Apex/

  Can someone tell what I should try?

  Thanks in advance

  Thanks for your reply. I think my 'short' (in this example) is "example". I also tried, but it does not work.

  This a mistake? Or show us to debug information.

  I was just wondering if you need to register the schema of the apex and apex public user in the ACL?

  You must add the schema of the apex to ACL.

• OID / LDAP configuration steps

  10204 on AIX version
  I need the LDAP.ora OID of installation for the 1st time, need help...
  
  Here are the steps that I intend, do me right if I'm not...
  
  1. configure the new db
  2 Configure OID on new db to next
  http://www.Oracle-base.com/articles/9i/OracleInternetDirectory9i.php
  3 configure the management of network entry ldap.ora & dbs with netmanager
  
  ---------------------------------------------------------------------------------------------------------
  
  2nd I'm trying to invoke oidca just to test how it works, please give me example of syntax for oidca, as
  
  $ORACLE_HOME/bin/oidca oidhost = myhost = dn? mode =?

  What version of Oracle Identity Management you trying to install?

  Anyway, please follow the instructions in Metalink Note 564174.1 Oracle Application Server 10 g (10.1.2) requirements for Linux: OEL 5 and RHEL 5

• The parallel model configuration help

  This is my first time posting, but I'm a long time reader...

  First of all, I consider my knowledge novice Teststand high to low intermidiate level. I created a sequence test to aid in Teststand that call labview vi. My test sequence tests 5 units at a time in a parallel model (model in parallel sequence). From a functional point of view, everything works great for single pass and loops. However, here's my problem:

  When you select "USE Test", it brings up a window that asks you the serial number for each of the five stations. The operator must then enter a serial number for each and press OK proceed. This configuration is not valid for what I do. My test setup has a button for each of the 5 stations. The user must press the button to start the test (connects to a data acquisition). Then the serial number is read from the UUT and entered in the report.

  How could I go how to reconfigure it? I'm not looking for someone solve my problems for me, I just need a little direction. I looked at the parallel sequence model and I may not know where to go with it.

  Help, please

  Ryan

  TestStand 4.2

  LabVIEW 2009

  In the parallel model, you will see the Pre DUT reminder.  Inside of there, you will find the steps that call the dialog box you're talking about.  The best option is to replace it in your file of the client's sequence.  Then write your own code that dictate the required operators to go direction.

  It's just the description the General "point you in the right direction."  Please let me know if you want more details.

  Kind regards

• LDAP configuration

  Hi, I am trying configure LDAP authentication service.
  The domain name for the user name I know is correct (it came from Softerra LDAP browser).
  The part I'm not too sure of is the query LDAP prefix and suffix.
  If the right prefix be CN =?
  All I want to do is add a couple of ad groups in AD 1 ORGANIZATIONAL unit.
  Pointers would be useful.
  Thank you

  Hello mrvirtual,
  The first step
  You will notice that the LDAP query prefix is set to CN =
  Change of CN = to be sAMAccount =
  It behave like the same transverse and the tree OR AD NTLM authentication
  Two step
  Change the suffix, LDAP query to reflect only the parameters of DC
  EXAMPLE: DC = example, DC = com
  Step three
  Change the LDAP context for the user the same search as the previous step, but without the leading comma
  EXAMPLE: DC = example, DC = com
  The fourth step
  Change the scopes to search groups pointing toward an ORGANIZATIONAL unit that contains the group that users are memberof
  Create an internal group in vFoglight by exactly the same name (as in the previous step ad group) and assign roles to the group. That when a user logs in using their credentials to the AD, it will be automatically added to this group and get corresponding roles.
  That's the gist of it. If you still encounter any errors then best option would be to open a pension deal because at that time, we will have to review the settings.
  Concerning

• Mac Pro: 5 Monitor Configuration help

  Hey guys!

  I have been working on a fairly massive project and am in need of some specific knowledge, Mac Pro, I did not.

  We will use the end 2013 Mac Pro as our work computer to bid on multiple auctions on multiple screens simultaneously. To illustrate the concept:

  

  * Forgive my skills as God art *.

  The problem we run into is wiring all 5 screens for the Mac Pro. Poster 2-5 have only the HDMI and VGA inputs. We are in need of the best possible quality who can offer screens of theses, my idea was just to pick up MiniDisplay 4 HDMI adapters to connect to the wall mounted monitors and use a Thunderbolt cable to connect the Thunderbolt Display. However, I have been informed and influenced in the delicate on the Mac Pro website formulation in the belief that the end of 2013 Mac Pro can handle 2 HDMI monitors.

  I would like to know your opinion on using MiniDisplay 4 HDMI adapters or not will work. And if no, what is the way to achieve the best quality on the whole upward.

  I thank very you much for your time and help!

  -Austin

  The 2013 MP can handle two monitors inherited (HDMI and DVI) with the cheaper passive miniDP > HDMI or DVI adapter. For more than two adopters must be active adapters.

  All adopters VGA are active.

  This is an active NPD > adopting HDMI

  http://www.Newegg.com/product/product.aspx?item=N82E16815158351

• HP downloads stuck in Panel configuration-HELP!

  My HP All - In - One Printer has been dead for over a year now and I have been going without putting my docs on disc and going to my local store print and print in this way. I MISS my printer but have no $ to buy another. PROBLEM is, many programs are blocked on my control panel and will NOT be deleted. I tried everything, searching the forum here to contact HP reinstlling with the disc itself (not good), I still have and try again AFTER uninstall and only 2 things that are resettled will uninstall but...

  1 HP Customer Participation Program 9.0 - won't uninstall

  2. the 9.0 HP imaging device functions - won't uninstall

  3 software OCR 9.0 HP - won't uninstall

  4 HP Photosmart Essential 3.5 - won't uninstall and keeps trying to put in place whenever I restart the computer with HP TrayApp

  5 HP Smart Web Printing 4.60 - won't uninstall

  6 HP Solution Center 9.0 - won't uninstall

  Does anyone know how can I get these? They mind other programs, including #4 with his continual attempts to restart...  I don't know a backdoor through them out, I hope someone can guide me through, 1 step at a time, to get down them. Thank you!

  Hello

  Download and install Revo Uninstaller from the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Run revo and use it to uninstall your printer software.  Make a right click on the program icon you want to remove and select uninstall.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove.  Do the same for any left over files and folders.  Once you have finished all the uninstalls, restart the PC.

  I hope this helps.

  Best wishes

  DP - K

• Guest only network configuration help

  Hi all

  I installed VMware Workstation 9 on my Windows 7 and has also installed a virtual machine running Windows XP (SP3). It is everything works fine, except for the network on the virtual machine. If I set the network adapter on the virtual machine for 'NAT', the connection works fine. However, I want to use a network 'host-only' for several reasons, and this type of connection does not seem to work.

  A few details:

  -It seems that Windows XP is connected (the usual internet icon on the lower left is connected).

  -ping does not work any site, but ping to "Card Ethernet VMware Network Adapter VMnet1" (I see when I do ipconfig on my host pc) works, so it is connected to something virtual...

  -Ping but to the "wireless network connection Wireless LAN adapter", which I think is my network really does not work.

  On my host PC, I see in the "network and sharing Center" that there is a separate 'VMware Network adapter VMnet1', it is identified as a public network (unidentified network) and it says "no internet access.

  I'm guessing that there is something as simple as allowing the adapter on my host PC to connect to the internet, but I don't see how it's done...

  Any help would be appreciated!

  Thank you

  Jonathan

  A 'Host-Only' network is as indicated in internal network on the host, it is not any access to the external network unless you add a router double nic.

  What may be sought, it is called a "bridged network.

• Network configuration help

  I've implemented a virtual client consisting of 2 virtual servers Server network and several virtual desktops. Server side, I have a card as full network and a 2nd card using vmnet 9. Other servers and workstations all have the vmnet adapter 9 as well. They are all together very well on the same computer network. This virtual domain works on its own IP subnet. I have a customer field of the database server hardware in place. This area is on a different IP subnet. I start from now all the virtual machines on a single computer. I would like to start one or two virtual machines on another computer and still be able to communicate with the virtual machines on the first computer.

  My question is how to configure the virtual machine network adapter that runs on a different computer to still be able to connect to the virtual machines on the first computer.

  This virtual network that I have is for training and for testing right now. I want to run this virtual private network inside my existing physical client server network.

  Anthony

  In order to communicate the VM must join the 'outside' world, which is possible with a network adapter or "Bridged" or "NAT". This can work, is to add a second physical NETWORK adapter to each host, configure vmnet9 as a network connected by a bridge using the second physical NETWORK adapter and connect via cross-cable or via a local network separate VIRTUAL hosts.

  André

• RAID 10 configuration help

  I built my new computer and decided to go with a RAID 10 configuration. After windows installation and reboot I got a critical RAID warning during startup. I have identified the drive has failed and returned. I installed the replacement drive and I still get the same error. Is there something special that I'm supposed to do when I replace one of the disks?

  Space is never the issue and speed is a raid10 alone is not enough for editing. Now, you may need to start over again, refcreating the table, reformatting and reinstalling. Don't forget to disable before you re-create the matrix.

  I called once Raid10 the format of table for the paranoid in a hurry. It seems to be the opposite, since you have to start over.