Leads to ear pods logic board replacement remote doesn't work anymore.

Similar Questions

• MacBook pro late 2011 glitches after logic board replacement

  Hi all!

  I end 2011 macbook pro in April 2015, I got free logic board replacement because of glitches of gpu (http://www.apple.com/support/macbookpro-videoissues/) but now I'm having the same problem again. my macbook showing pink lines on startup apple logo and does not start.

  Can I replace my logic board again (it will be 2nd time) this program?

  Depending on which country you are (United States I guess) you should actually be covered under various consumer protection regulations and must now insist on a replacement machine. This defect is a manufacturing defect and that you already had a repair that did not set you have the legal right to a replacement. That said I should advise that Apple do not tend to stick to their legal obligations in this case (I know I have a macbook 13-inch pro who had questions on the first day and despite extensive repairs Apple still refuse to replace - although clearly indicated their own conditions of sale & the law here) He should have).  On another front repairs performed on any product should work properly for a "reasonable" period Again the definition depends on what country you are but in Europe, which is usually recognized only 6 years old at best. Good luck!

• vmnet0 does not run after logic board replacement

  Hi all

  I just had the logic board replaced in my mac pro book.  Now, when I start my vm, it says:

  The bridge network on the device/dev / vmnet0 does not work

  The virtual machine will not be able to communicate with the host or

  other machines on your network.

  Virtual device Ethernet0 will start disconnected.

  Any suggestions on how to fix this?

  I'm trying to run a VM XP with Bridged networking.

  When I go to NAT, it works.

  Try to uninstall merge, restart your Mac and the Fusion facility. This will not affect your virtual machines.

• MacBook Pro 13' - logic board replacement

  Hello

  I bought myself a Mackbook Pro (end 2011 model) and it doesn't have the bees working properly. It spontaneously turned off a few times. And the last time it happened I took it in to an apple store for orientation. I was told that I have to replace the logic board, and it would cost more then a whole new Macbook Pro for the repair.

  I did a search on the internet, and to my surprise I discovered that there was a RECALL for this same model end of 2011.

  Does anyone know this recall?

  There is a programme of replacement of 15 "and 17" 2011 Mbps and NO 13 "Mbps.

  https://www.Apple.com/support/MacBookPro-videoissues/

  I suggest that you look on the Internet for a functional logic for your MBP adapter and install it yourself.  Good place to look up the prices indicated Powerbookmedic.com iFixit.com.  They also have detailed instructions on the installation process.

  Ciao.

• Siri home remote button not working anymore

  Hello

  have a problem with the remote Siri yesterday.

  Unfortunately, the Home button no longer on inputs.

  Can support long is no longer going to sleep. Go as the application changes to home viewing window is no longer.

  All other keys are working.

  When I use the Home button reacts ATV through the reactions of the white LED.

  But nothing happened

  What can I do? Thank you

  probably the Microswitch is broken and you can try to return it under warranty or buy a new

• Replace all doesn't work for "';" "alert (1)".

  Hello
  
  I want to replace "';" «alert (1) / / "text of a string with «»
  
  Here's what I've tried->
  
  String url1 = "https:// < host name >/search/search. "domain = sinequa & profile = DAS & encoding = utf-8 & text = x'; alert (1) / / & selScope = & advanced = 0 & search-btn-submit = search precision = & strategy = & sort = globalrelevance.desc & after = & before = & sourcecsv1 = & doctype = & docformat = & questionlanguage = autodetect & documentlanguages = & treepath-0 = & Phonetics = 1 & fuzzysearch = 1'; alert (1) / /";
  
  Url1 = url1.replaceAll ("'; alert (1)" / / "," "");
  
  System.out.println (url1);
  
  But it shows the same string.
  
  Why it happen like this? How can I make it work?
  
  Kind regards
  Amey

  "Outside character classes, '(' et ')" are some metacharacters in regular expressions if you need

  url1 = url1.replaceAll(Pattern.quote("';alert(1)//"), "");
  

  or

  url1 = url1.replaceAll("';alert\\(1\\)//", "");
  

• HP G6-1b60us: Laptop doesn't work anymore after trying to replace the top cover

  Disregard this message. I solved the problem. There is a piece of Ribbon that is connected to the switch that was not plugged in. Thanks anyway.

  Thanks for sharing the information.

  Good day!

• Qosmio F30 - remote does not work after recovery

  I replaced the HARD drive in my qosmio F30 and restore windows XP MCE from the DVD of restoration, but the remote doesn't work anymore under windows. However, it always works for the qosmio player. Help, please?

  Hey Kevin,

  You can download all drivers here if you have a European model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Your model is a bit more if you need to find in * Archives *:
  * Archive * > Qosmio > Qosmio F Series > Qosmio F30

  Check this box!

• How to replace the logic board MacBook Pro mid-2010

  I have a MacBook Pro 13-inch mid-2010. About once a week, monitors (one who is part of the laptop) and an external will turn grey and freeze. When I turned off the computer, it brings back me to the login screen (I'm under 10.11.5), but I can't move the pointer (whether with my Apple Wireless Mouse or trackpad) to select the icon for my login. After a few reboots, the computer takes care of the password reset function. And there, I can reuse the mouse, select Restart the machine, and I'm back on my way.

  The genius of Apple and I suspect that the problem is with the logic board. Unfortunately, Apple has more parts for MacBook Pro mid-2010. I contacted a few service centers certified Apple the kind told me; None of them can help either.

  Any suggestions for how I have a fix for this problem? Thank you!

  You could contact a specialist to see what their requirement is to send you the

  computer while for a diagnosis appropriate; a specialist is the one who can do all the

  works internally and could actually fix the edge logic that the Mac came with.

  I know some who do this; they charge more than a parts Exchange hosting.

  You can see what a company such as wegenermedia can do. Or see what the

  iFixit guide for Mac (for your specific model) said repair and watch to see who

  part numbers are involved in replacement of the like-kind in refurbished or tested

  OK, from sources such as powerbookmedic.com and other sources used parts.

  The logic board may not be a problem; might be some on the Board of directors or of one which

  attached to, such as the graphics processor. These older models are not

  so difficult for a specialist expert set. While the Mac is able to do so, is a good time

  for they provide labour expertise to swap upgrade replacement parts.

  They can test the feature set and should provide a guarantee for employment.

  Some of these companies repairs also restored the supply of older computers they fixed.

  Good luck & happy computing!

• Replaced logic board

  December 2015 new display iMac with the retina 5 k, 4 GHz Intel Core i7, 16 GB 1867 MHz DDR3. The problem started when I opened a photo in preview or Photoshop. The screen was decided in 2 different colors and have to restart. I couldn't open a pic in the preview and work in Photoshop.

  During this time, my camera was working fine and I used video Skype without problem. Then in January, I sent the new iMac to an Apple dealer to solve this problem, and they changed the logic board. It took 4 months to be repaired, he I just for 2 weeks now, preview works fine and photoshop as well BUT I realize that the camera to the iMac does not and the microphone internal as well.

  I have 2 questions.

  1 - How the camera and the internal microphone can be fix

  2. when they replaced the logic board, I lost my serial number not available.

  Really need help.

  Where are you from?

  You do not have a real Apple Store to take your iMac to any type of repairs?

  You take your iMac to a new Center Apple authorised dealers/repairers and it took them almost 5 months to repair/replace a logic board in your new iMac?

  If a new iMac, your statements read as if they were NOT in the very competent repair center for me.

  I would have set up an adjustment NOT seen my iMac nine 5 months and fry it with, however, other problems.

  Why, no real Apple don't Store to take your iMac to.

  Is this repair center labeled as an authorized Apple dealer/service center or is it some computer shop electronics/generic, simply stating that they can fix Macs. Doesn't seem to be a very competent repair center, at all! IMO.

  I think you need to, once more, it bring for repair as the repair center has not done something right (AFTER 5 MONTHS!).

  If you have any actual Apple store, you can drive to, I bring in for repair and explain what has happened with this new iMac, so far.

  Better yet, you can call Apple directly at 1-800-MYAPPLE and speak with the service the customer of what happened with your new iMac purchase and see what they can do for you.

  Your iMac should NOT have this kind of questions after a month and still problems after waiting 5 MONTHS for the logic of BIG boxes replaecment after just a MONTH of USE?

  Contact Apple directly, first.

  This iMac should NOT have all these difficulties.

  See if they would replace your iMac and the plug by another new unit model.

  If this does not happen, and they offer to continue to fix, then make sure that very soon that you pay and save extended AppleCare that gives your new iMac two additional years of warranty repair.

  Good luck!

• Should I replace logic board or cable hard drive? MacBook Pro 13 mid 2012

  Hello guys I suffer for the last two weeks of my Macbook Pro would be grateful if you help me.

  Summary:

  A few months ago my mac has been slow and when I restart or stop it would take a minute or two, what has not happened in 2012-2014. In 2015, I decided to upgrade my SSHD HDD - Seagate 1 TB (that I'd need more space and a better performance). After that the upgrade of SSHD everything went well, my mac has been rapid, the battery has now 8 hours of battery life (440 + cycles). Overall it was a great experience! However during the night my frozen Mac even the mouse cursor, so I closed my Mac and it set in motion this time he showed me an icon of the slash. I disassembled my Mac and handed the stock HARD drive. This time, he showed the white screen without the disks. I tried several boards of various sites and one from the tip which has been WORKED safe mode! When I restarted, he returned to square one... I used the same trick but it didn't work. Now I see that a white screen on both discs, sometimes the issue icon flashes. Just for you find the hard disk turns but does not recognize... Although she acknowledged on my other Mac.

  I just remembered something just before this incident happened, I was cleaning up my Macbook with a small wet towel size (including the liquid soup inside) and then I cleaned the screen, the trackpad and keyboard (some liquid went inside the thing black screen and some of them inside the edges of the trackpad) but I them rinsed quickly. After 2 days, the slash screen appeared, and that's how it started.

  I removed the battery to see if there is any corrosion or something unusual about this, I also checked the trackpad, and it wasn't any dry liquid or dust, etc.

  Get to the point:

  Currently, I use my Mac through an external SSHD and everything works fine, but I want to stop using this method and thus solve the problem.

  Issues related to the:

  What exactly is the problem? Is my logic damaged Board and keep my HARD drive to recognize?

  Do you think that my card is fine, but I just need to replace the cable from the hard drive (821-1480) to a new?

  What happens if the hard disk thing stuck on the logic board or is damaged?

  Please help me and I'm sure that others are also facing a similar question. Another note, why some users claiming that their disk cable hard is to failure after replacing several times?

  
  

  We do not know "What exactly is the problem?". Get out your computer to an authorized for assessment service center. I suspect that you have caused water damage when the water and soup entered into your computer. Be prepared for a fix expensive since the water, not the soup ir and electronic works well together.

• Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Old version download apps:

  CS 6:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  On the same page, you will have the possibility to download other versions.

  

• A USB connected device damage my logic board?

  My iMac (Intel Core i7 3.4 GHz - OS X 10.9.5) recently started to shut down, requiring a reset of the SCM in order to back to the top.

  The logic board has been replaced, but less than a week he started to happen again. A connected USB device could be the cause of the problem?

  Hello

  It depends on. USB 3.0 and 3.1 standard are limited to 5 volts with a draw limited current 1.5 amps, but are made to withstand 5. If there is a soft short-circuit or death in the terrestrial component then yes it could damage the system board or at least safe where to put it down to avoid damage to himself if it detects the voltage on the common ground or DC. I wouldn't use any device you have plugged into it or it will continue to occur and could potentially cause more damage than just the logical card. It could cause data corrupted on your hard drive or other components.

• Virus or the logic board problem?

  Everyone has this screen before? Another screen that appears is a bunch of letters and numbers. Now my computer won't even turn on half the time. Sometimes just the fan will start the liquidation. Before what is going on started my computer would freeze and then turns off randomly. I called apple and I also took at the Genius Bar. They think maybe it's logic board. The Lady said that my best money wise option would be that she be sent for $280, more repairs before as I do that I wanted to see if anyone had any advice. At this point, I wonder if I should just get a new computer. I don't use the computer a lot to the point where this should be the case. Would it maybe a virus?

  

  No, it is not caused by malicious software.

  You must replace the system board, if you want to keep the Mac.

  Best.

• 15 mid-2010 "MacBook Pro Logic Board

  Excuse me if I do this wrong, because this is the first time I ever used something like this, other than looking for things.  So I apologize in advance for any missteps.

  I recently took my mid-2010 "15, 2.4 GB MacBook Pro in an Apple retailer approved and found the logic board is the problem.  They also informed me that there was a 'reminder' on this point to be replaced free of charge.  However, this recall went to day a few years ago.  Nice, since I have nothing received from Apple on any reminder & it was not giving me any problems so far, apparently I'm screwed now.  The dealer said that because my machine is now considered to be "vintage", Apple has more room, the #661-5566 or #661-6360 in stock MLB & my logic board current should be sent to Florida to Arizona to be "renovated" and then reinstalled.  Apparently costing a little more than $500.  Ouch!

  I had been thinking of buying the new 2016 15 "MacBook Pro when it comes out later this year and using my old one as a backup.  However, as Apple could not extend the courtesy of advising me of this initial reminder of my logic board, spare me $500, I am strongly reconsider this purchase.  Unfortunately, I like Apple products and have bought several iPads, the large iPad Pro and Apple iPhones right up through my iPhone current 6.  Invested in Apple's it makes profoundly difficult to get away from them, but not impossible.  Had they notified me of the recall, I wouldn't have these problems now.

  My logic Board recommendations or suggestions are greatly appreciated.  Thanks in advance.

  Welcome to the forums of Apple users.

  Nobody is allowed to speak for Apple. Users can give their opinions and advice you if you have a technical question.

  And here are some:

  Consumer Reports suggests that if the cost to repair a unit is more than half the cost of a new, you should get a new one.