vmnet0 does not run after logic board replacement

Similar Questions

• MacBook pro late 2011 glitches after logic board replacement

  Hi all!

  I end 2011 macbook pro in April 2015, I got free logic board replacement because of glitches of gpu (http://www.apple.com/support/macbookpro-videoissues/) but now I'm having the same problem again. my macbook showing pink lines on startup apple logo and does not start.

  Can I replace my logic board again (it will be 2nd time) this program?

  Depending on which country you are (United States I guess) you should actually be covered under various consumer protection regulations and must now insist on a replacement machine. This defect is a manufacturing defect and that you already had a repair that did not set you have the legal right to a replacement. That said I should advise that Apple do not tend to stick to their legal obligations in this case (I know I have a macbook 13-inch pro who had questions on the first day and despite extensive repairs Apple still refuse to replace - although clearly indicated their own conditions of sale & the law here) He should have).  On another front repairs performed on any product should work properly for a "reasonable" period Again the definition depends on what country you are but in Europe, which is usually recognized only 6 years old at best. Good luck!

• The Oracle optimizer automatic statistical work does not run after full import

  Hi all
  
  I did a full import in our QA database, import was successful, but GATHER_STATS_JOB does not work after sep 18 2010 if its activation and on demand, I question last_analyzed table to check and confirmed that he has not run after sep18, 2010.
  
  See below for the output
  
  OWNER JOB_NAME HIS STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
  ------------ ------------------------------ ----- --------------- ---------- ---------- ------------------- ----------
  SYS TRUE REGULAR GATHER_STATS_JOB 2010-09-18 06:00:02
  
  
  Collection of statistics work defined automatic optimizer Oracle
  
  =======
  
  SQL > select JOB_NAME, STATUS, OWNER, REQ_START_DATE,.
  TO_CHAR (ACTUAL_START_DATE, ' dd-mm-yyyy HH24:MI:SS) ACTUAL_START_DATE, RUN_DURATION
  of dba_scheduler_job_run_details where
  job_name = order of 'GATHER_STATS_JOB' by ACTUAL_START_DATE asc; 2 3 4
  
  OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
  ------------ ------------------------------ ------------ ------------------------------ ------------------------------
  RUN_DURATION
  --------------------
  SYS GATHER_STATS_JOB MANAGED 16/09/2010 22:00
  + 000 00:00:22
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-17 22:00:02
  + 000 00:00:18
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-18 06:00:02
  + 000 00:00:26
  
  
  What could be the reason for the GATHER_STATS_JOB job does not although his game to automotive
  
  SQL > select dbms_stats.get_param ('AUTOSTATS_TARGET') of double;
  
  DBMS_STATS. GET_PARAM ('AUTOSTATS_TARGET')
  ------------------------------------------------------------------------------------------------------------------------
  Auto
  
  Someone has this kind of experience, please share
  Apprecitate your answers
  
  Concerning
  SRH

  ? So basically you're saying is if none of the tables are changed then GATHER_STATS_JOB will not work, but I see tables are updated again the task does not run. I did > dba_scheduler_jobs request and the State of employment are true and regular. Please see my previous post on the output

  Am I missing something here, I get some parameters parameters

  So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not work.

  GATHER_STATS_JOB will take place, and if there is no table in which there is a 10% change in the data, it will bring together statistics on this table. If no data in the table have changes less than 10 percent, it will bring together not statistics.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/stats.htm#i41282

  I hope this helps.

  -André

• VMware tools does not run after installation

  Hi all

  After installing the VMware tools, my mouse still does not go smoothly as before installing, I rechecked service runs, I don't need to hold ctr + alt to move comments to the host, or vice versa, I did uninstall and reinstall.

  Am I missing something here?

  Thanks in advance

  Hello

  What operating system do you use?

  If 2008 checkbox.

  http://www.datadr.NET/index.php?option=com_content&task=view&ID=74&Itemid=35

  Frank

• Sibelius 6 educational does not run after running good for a while.

  When you run the troubleshooting (right click), it is said now that it is not compatible.  Tried to uninstall and reinstall (works on another computer, but not my main pc).

  It does not start at all.

  Hello

  Try to run the program in compatibility mode and select

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

• the custom transformation does not run against logic model

  Here is the screen [http://img849.imageshack.us/img849/7411/20110530174314002.jpg | http://img849.imageshack.us/img849/7411/20110530174314002.jpg]
  
  In addition to the definition of the logical = object that the script against the relational model. To prove this, have a script to collect all the table names, and have different names in the two models.

  There are scripts works on the logic model - ability to auto create a primary key column when creating an entity?

  Philippe

• Disk space free (compress old files) does not change after you run Disk Cleanup.

  Original title: win. XP disk cleanup

  Win. XP: Free Disk Space (compress old files) does not change after you run Disk Cleanup.  Confused.

  Thank you. VC

  Compress your files, your computer will slow down a lot. I recommend that you don't try this.

• I installed acrobat reader in window10 and demoted to the 8.1 window. After downgeading 8.1, acrobat reader does not run and also do not uninstall and reinstall. Only, I get the error message. What should I do?

  I installed acrobat reader in window10 and demoted to the 8.1 window. After downgeading 8.1, acrobat reader does not run and also do not uninstall and reinstall. Only, I get the error message. What should I do?

  Hi soyoungl9536964,

  Please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" on your machine to remove all traces of the reader.

  Then, restart your machine and install the latest version of the player from here:

  Adobe Acrobat Reader DC install for all versions

  Let me know if any problem will persist.

  Kind regards

  Christian

• LR - CC does not work after installation with creative cloud. I run a W7 64-bit system

  Hello

  LR - CC does not work after installation with creative cloud. I run a W7 64-bit system.

  I got LR 5.7 running and is not installed by the CC.

  What to do

  Thank you.

  Hi Ridder,

  Please visit the solutions proposed in the following article.

  Lightroom does not launch or closes automatically after the splash screen

  I hope this helps.

  Kind regards

  Sumit Singh

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• "Private browsing" window does not close after opening web site

  "Private Browsing" window does not close after the opening of a web site; He remains on the side of wight of the screen and cannot be closed.

  It turns out that partially Wen site on the left side of the screen and can be closed.

  Problem solved. Bookmarks removed and replaced and now everything works according to plan.
  Thank you

• Dashlane module does not work after updating firefox 33.1.1

  The add-on dashlane does not work after last update of firefox for 33.1.1. Gray Impala stays and seems to be offline. Re-install the add-in dashlane does not work, delete also en reinstall firefox does not work.
  I am running dashlane and firefox on mac 10.10.1

  Solved!
  Today there was an update of dashlane in the app store; This was the solution for this problem.

  Thank you

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!