learned to connect here to close my phone cannot

Similar Questions

• connection Bluetooth with the mobile phone cannot be established

  HP pavilion laptop g6 with windows 7.

  connection Bluetooth with the mobile phone cannot be established, all drivers were dated until, when it is associated with my phone samsung smart, driver downloads and everything is ready for use.but when click the smart phone

  It shows offline and it said no device ID is given,

  What to do, please help

  my portable BT device is defective? or some other problem, has also tried to connect other phones too, but same problem.

  Rgds,

  Hello

  I just want if sure that you have the right driver installed from this first link provided in the answer from the Support Engineer. If you click this link, then clikc the first option 'Use the device in Windows 7 Troubleshoot utility' need you a paragraph with a link to the appropriate driver.
  I will link here just to make sure.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?swlinkmsg=200&cc=us&DLC=en&docName=c01590950&LC=en&product=5068623&softwareitem=ob-76382-1
  It's the right driver you need. Please verify that this is the one that you have installed and do we know the results.

• Connect to iTunes via the phone

  How can I connect the phone to iTunes?

  How/where to connect?

  If you didn't have iTunes on your computer and then connect it to your computer - if your computer iTunes doesn't recognise it (what version of iOS is on the phone? which version of iTunes on the computer?): If iTunes does not your iPad, iPhone or iPod - Apple Support

  If you mean that your phone cannot connect to the store: If you can not connect to the iTunes Store - Apple Support

• Connection printer Photosmart 7525 to phone for printer won't answer incoming calls.

  The Assembly instructions are not clear on how to connect the printer to the phone for printer (FAX) won't answer incoming calls.  I have an answering machine on the phone I want to answer - not the printer - after a number of rings.

  Hello

  Follow these steps to set up the fax on a voice/fax line shared with an answering machine.

• Where can I find the Bluetooth driver to connect my Samsung SCH-U640 phone to Windows 7?

  I need driver to connect my Samsung SCH-U640 phone to Windows 7 Home Premium. Where can I find this driver?

  Hello

   
  I suggest to visit the following link and enter the subcategory, the name of the model and the model code to download the necessary drivers.
  
  http://www.Samsung.com/us/support/downloads/Verizon-Wireless/Sch-U640EKAVZW
  
   
  Check if it helps.

• NAC - STACKED IN THE AUTHENTICATION VLAN IF THE PC IS CONNECTED TO THE CISCO IP PHONE

  Hello

  I have configured my NAC in L3OOB, if I connect my pc directly to the switch I have no problem, I can access the network as out-of-band user, I can pass authentication. BUT IF I CONNECT a Cisco ip to switch phone and my pc is connected to the Cisco ip phone I'm stacked to the vlan authentication and cannot access the network. The event logs of the my CAM, it's say that it detects several mac address.

  Please guys help me with this problem...

  Thank you and best regards.

  Hello

  Have you added your phone MAC address to your CAM in the filter to IGNORE it?

  Faisal

• I just got a new modem att wireless, now my phone cannot connect to the printer as it used to...

  just got a new modem att wireless, now my phone cannot connect to the printer as it used to...

  If AT & T has provided the modem, you can give them a call and explain the problem you are having. They should be able to help you. If you did not have all that in place, then it would be a little difficult to explain what you need to do... but... basically you would need to connect the modem and check the settings there and make sure your printer match the parameters.

• Creative cloud shows I have 2 updates - 1. Photoshop cc 2015 & 2. Lightroom cc 2015. When I try to do it asks for my password and then rejects it. I clearly know ' cos I'm connected here with him. The reminder is as much as I remember with

  Creative cloud shows I have 2 updates - 1. Photoshop cc 2015 & 2. Lightroom cc 2015. When I try to do it asks for my password and then rejects it. I clearly know ' cos I'm connected here with him. The reminder is as much as I with reminds me that it is correct but is not not eligible and therefore do not allow me the updates. Cannot find anywhere to get help from Adobe other than the connection to a forum and ask. Anyone else has this problem and how can I solve it please? Thank you, Tom

  Remember that the password asking, it is NOT the creation of clouds or Adobe ID, the user of the computer, you must be and admin to install updates.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• SW2 - host App and Smart Connect different certificates. Host application cannot start.

  I had my 2 SmartWatch today and installed app Connect Smart and SmartWatch 2 since google play, got the smartwatch of pairing with my bluetooth phone manual connect.

  But in the notification bar I get "the application host and Smart Connect different certificates. Host App cannot start. "and I can't go settings on Smart Connect to the SW2.

  Please help, now I can't use the no apps smartwatch becouse...

  It's very strange, these files works fine for me in an S3.

  Would it be possible for you to make a backup of your phone then reset (or reinstall the software using Kies if possible), and then try again (before restoring the backup)?

• The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server?

  All new computer running windows 7 64 bit, outlook and office 2007 installed, initial problems with the temporary user profiles, follow up advice and removed user profiles in the system registry and all seemed to go well. Computer works for about a week with two user profiles and now all of a sudden I get an error message when I start Outlook and from time to time when you browse the internet, it reads:

  The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server? (If I hit Yes then I can send emails)

  When I open view certificate it says: this root CA certificate is not approved. To enable trust, install this certificate into the store certificate authorities roots of trust. (Attributed to and: Cisco device demo certificate - valid from 10/02/2009 to 03/10/2019).

  Problem is I don't know what the certificate is, what I need, to find out how locate, how to move etc, I have read a few forums, but they are starting to be too technical. I need help for step by step easy.

  I tried to uninstall outlook 2007 and reloading and clearing of the States of ssl in internet options, and then reset by default (as someone suggested), but it made no difference.

  Problem is when you leave the store with the new computer, nobody wants to know you if you need assistance!

  Can someone please help? Thank you

  Hello

  Welcome.

  Just a tip, never download and install anything on your PC, unless you know and trust him.

  > «Computer brand new...» I need help for step by step easy. »

  Contact the PC manufacturer emphatically support team.

  > ".. . Office 2007 installed...

  Support to the: http://answers.microsoft.com/en-us/office/default.aspx#tab=1 and ask your question in Outlook it.

  You can also check if this problem occurs when you use Windows Live Mail, which can be downloaded on: http://download.live.com/wlmail.

  > «Server that you are connected using a security certificate which cannot be verified...» »

  Just learn more about the certification of server to the: http://en.wikipedia.org/wiki/Certificate_server .

  Remember: keep the system tools and security update.

  Success.

  Rgds.

  itconcerned

• Unable to connect to the Windows store and cannot change the account back to Microsoft Account

  Original title: question of Windows 8

  Hello world

  I almost broke my laptop trying to solve the problem of connection app win8. I have portable branch one month before, it was all alrigh except one extremely annoying thing. I could not use win 8 apps, I couldn't go to 8.1, could not use weather and etc. After that I tried almost everything I decided to cool off. Wow. Initially working store, however it asked me to upgrade upgrade windows essential stuff and so I did. And now again the same problem - unable to connect to store, can't change user of windows one...  It's just loading forever, absolutely all applications...

  (1) Changed to the local user - can't change it back.

  wsreset 2) used several times

  (3) firewall off and both Windows defender

  Future prospects for the answer.

  Hi there.)

  Problem is solved. BTW, it seems that these questions are simply copied and pasted. What a shame.

  (1) it is quite indifferent to me.

  (2) wireless, which is irrelevant as well

  (3) No, as I wrote in the first post - they are all off

  (4) failed to connect

  (5) I wrote in the first post that, after updates, was not able to do something with win8 apps

  Right, the thing was in one of the updates. I second refresh and created restore point. Updates that had to get 8.1 (which are the firewall or something like that), after all, created second restore point and downloaded the rest 80 + and here again the same story - cannot connect. This is a problem, your updates - lol. So I restored and the second point and kept without updates, finally, this updates past the list and some of them will update automatically, however I was not lost access to the victory store and now I have 8.1

  It's so funny to see how thousands of users still cannot access win store due to the error of the software engineer.

  Best wishes

  If all goes well, it will help those who are looking for a solution.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player