Leave the Section synchronization Batch cleaning

Similar Questions

• Include the results in "Batch report" instead of "report USE".

  Hi all

  I modified the ProcessSetup TS 4.0 reminder to perform a test of the preliminary material before testing 8 DUT using batch processing model. Since this is a reminder, the results are not registered by default, so I store it in a global table of results. Then I copy this table of results into my results MainSequence table.

  The problem is that this means that these preliminary results will be saved for UUT0 (if I use "A thread only" synchronization") or to the DUT (if I use the synchronization of batch processing model). How can I add my ProcessSetup test results to the "Results of the batch" section of the results page rather than the sections "USE results? The test checks the shared material and is thus applied to the DUT. I prefer not repeated it for each USE or make it look like, it applies only to WEAR it first.

  Thank you

  Chris

  Tomahawk,

  Al is correct that is whether you use HTML or ASCII report formats, you can override the ModifyReport... Reminders to get what you want. Unfortunately, with the XML declaration, you can use the ModifyReport... Reminders. In order to accomplish the functionality that you want to see everything and still use the report XML form, you will need to change the BatchReport reminder, as well as the XML style sheet you use.

  TestStand 4.2, we have created tutorials and provided better material for our XML Style sheets. With a little effort, I am convinced that with TestStand 4.2, you would be able to reach your goal.

  I suggest to take a look at customization of Style TestStand sheets of TestStand 4.2 help (available online). Unfortunately, Style XML TestStand 4.0 sheets do not have the same quality of literature as the TestStand 4.2 Style sheets, so you don't will not commented sections in the leaves of Style 4.0 as explained in the help.

  For this particular case, you do not want to change the reminder of BatchReport to store the data that you want to place in your report batch section. Then, you change the section batch report of the Style XML with XPath map appropriate to display these data in the batch report.

• Keeps the iTunes synchronization

  Since the last update to iOS 10 and 12.5 of itunes, itunes keeps synchronization the same songs on my iPhone

  Already deleted all settings and restored a backup

  Removed all the pieces and started

  The songs are not in a smart playlist

  Something else I can try

  I also posted this in the section of the iPhone, but I think that this is not the right place for this

  iTunes 12.5 maintains synchronization same songs

  Thanks in advance

  The plot thickens.

  I've just updated my iPod Touch iOS 10 and low and here is the problem of synchronization does not occur on the iPod Touch.

  Both the iPhone and iPod Touch sync via the same iTunes library.

  Any ideas?

• I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  I use my MacBook Air as a desktop computer. Should I leave the charger plugged all the time or should I drain the battery and then recharge? What is the best for the battery?

  Keep the computer plugged in whenever possible.

  If you keep the computer always connected, make sure that at least twice a month

  Run it on battery until battery charge level falls to about 40-50%.

  Please don't completely discharge the battery. Discharge the battery completely will reduce wear and tear on the battery.

  For more information:

  Section: To optimize the battery life

  http://support.Apple.com/en-us/HT204054

  Citing at the bottom of the linked article.

  "The question is often asked:" should I disconnect my laptop from the mains when not in service? Under normal circumstances it should not be necessary because as soon as the lithium-ion battery is full, a properly functioning charger will stop the load and load the pad will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe. »

  http://BatteryUniversity.com/learn/article/bu_808c_what_the_user_can_do

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• not all the imported photos appear in moments without leaving the app

  Hello.

  I use a photo stream having the photos to import into my Mac (which has iCloud library enabled) from my iPhone (which has no active ICPL).

  About half of the time on my mac Photos will miss a photo or two times. You can see in the "pictures" section, but it will not appear in the 'Moments '.

  Leave the Photos App and relaunch it solves it.

  Anyone else running into this on a regular basis?

  Curious. And please in advance.

  Holly

  For devices using iCloud Photo library My Photo Stream is not active - the photos are synchronized using ICPL not MyPhotoStream

  When you have pictures in all the Photos that you don't see in Moments right click in all the pictures and show instant - made pictures then show in a moment?

  If it does not back up your library of Photos and then press the command and option keys during the launch of Photos and the repair of the database

  LN

• Satellite 1800-814 stops the heat: how to clean the laptop?

  Hello
  My Satellite 1800 814 seems to stop after using it for 20 minutes, it shuts down immediately, when it restarts, it stops in a minute. I need to leave it for an hour before using again.
  The fan seems to be working: because of the noise, the air coming from the side of the laptop.
  I was thinking about 3 things:
  -Disassemble the laptop to clean it with air, dust may block air to reach the CPU.
  -increase the speed of the fan is - it possible?
  -change the fan (if broken), where this part?
  Any idea?

  Hello

  I think you need to just clean the unit. I have gift? t know exactly, but I assume that this unit is about 3 or 4 years and if the unit is not cleaned in the past, I assume you will find a lot of dust inside.

  If I remember correctly the cooling grill is on the left side. Many users use vacuuming, but I'm not exalted the spirit of this method. In my opinion, the unit must be dismantled and cleaned properly. I have gift? t know if you should do it alone. As you know that laptops are very sensitive units and just small mistake can be due to lack of material.

  Please be careful about this.

• Should I leave the facial recognition Apple learn ears?

  I would have thought it a silly question until I started to take corrective measures that I will not be able to cancel. Now, I want to just make sure that the ear is actually a problem I need to fix and not a useful thing, I'd appreciate it.

  As long as I've been on the Photos (~ April 2015), he found ears and offered me the faces. I read once you include the back of someone's head in their face album. The article implied that users (maybe just lay ones) should not worry face obscured the person or case-head of screwing with the algorithm of recognition. This is a piece of information.

  The second is that maybe Apple learns ears to identify the profile pictures. Maybe he learned a person's appearance according to its features of the face (front) AND its characteristics of the ear (profile). In this case, I very well should put all the pictures where my ear is surrounded exclusively in my face album.

  Or maybe it's intend to Apple (although I can't find anything to support), but the software needs much development (as with African-American faces). In this case, I wouldn't tell him to ignore the ears that I see that it is found; I had just leave them be until the software is pretty good to start with profit by associating them with names.

  I've been on the Beta of El Capitan since my guest between July and September.

  

  The corrective action, I mentioned include an album of the ears and then, after catching a lot during some time, select them all and choose "don't not a face.

  .

  Face recognition identifies quite a few areas of a photo as a face, if she sees a model, where the two dark spots could be seen as eyes.  I see a lot of these false positives.  Faces in the rock or in the bark of the tree.  Just dismiss it as 'Not a face' as you did.  If you enlarge your photos of the ear, you will see the faces hidden in the section.

  

  It detects even the faces of pets as sides occasionally:

• Is it safe to leave the cover of the keyboard between the keyboard and screen retina when I close the macbook?

  Hi, I have a macbook pro 15 "retina.

  I got the cover of the keyboard (not cheap but decent), and I use it everytime I open my macbook.

  However, I heard that it would be dangerous to leave the keypad cover when you close the macbook. Because it could hurt the sensitive retina screen.

  Is this true?

  Is it safe to leave the cover on my keyboard when I close the macbook? It's a little annoying move coverage of my keyboard everytime I have my macbook to opening / closing.

  If it's dangerous, is there a cover keyboard without danger to the retina on the market?

  Thanks for the help!

  I have used Moshi Clearguard kb current covers on two MacBook Pro, including retina mid-2014, I usually use closed with my Apple display 27 ". I put KB covers on as soon as I bought computers and have never deleted without fingers never touched my keys. I did it because I saw how dirty the kbs in the Apple Store, and the seller told me that once the black keys are oily, it is impossible to clean completely. I started with a silicone rubber cap. Three weeks later, I threw it in disgust and I bought a Moshi to replace.

  Moshi rugs are much thinner and lighter than the silicone rubber ones more adapted, hold their shape better, stay clear longer and are much easier to clean and type through. In addition to the one on my computer Ko, I keep one on the external Apple wireless keyboard which is always exposed on my desk. These caches really keep particulate crud, and they do not interfere with my typing at all. When they are dirty, I rub it in the sink with a detergent and a brush to vegetables, and when possible discoloration becomes noticeable after three or four years, I replace it with new ones.

  My previous MBP, a Core 2 Duo late 2008 unibody model, allows to get much hotter than my current on occasion, and I fear sometimes that heat buildup between the lowercase and the display closed would cook the KB cover or even the screen itself. But that never happened, but I guess it might have helped if any yellowing of the coverage.

  If use you Moshi hiding for seven years, I would never consider a time using a silicone back cover. I did not, and you shouldn't worry about all to close your view on a Moshi.

• Residential group number! I can't change the password or leave the group. Convenience store can not solve the prob

  I did a clean install of OS win7 ultimate. If I try to change the PW, it says that windows cannot configure a homegroup on this computer... but still, he said that this computer belongs to a homegroup. If I try to leave the homegroup, it says windows could not remove the computer from the group. Troubleshooting, declare that the Peer Name Resolution Protocol service or peer network identity Manager is not open. If I go in services, it shows that the NIBPM is automatic and the PNRP protocol is manual. If I try to start the PNRP protocol, it is said that windows didn't start the service because of the error code # 0 x 80630801. Peer Networking Grouping also gets error code # 1068.

  Hello

  On the Start Menu, open the control panel and open Folder Options.  Click on the view tab, check the radio button titled "Show hidden files, folders and drives" and out the box "Hide extensions of known file types".  Click on apply to apply these changes.

  Then go to C\Windows\ServiceProfiles\LocalService\AppData\Roaming to Local disk and open the PeerNetworking folder.  Inside, you should see a file called idstore.sst.  Delete this file.  Close this window and return to Folder Options then re - hide hidden files folders and drives and extensions of known file types.

  Restart the PC and let Windows load completely.

  Now, check if the following services appear as shown below, and if they are not, if you can set them up now.

  Peer Networking Grouping this should see the service type as Manual and the service is expected to show that started.

  HomeGroup Provider should show as Manual startup type, and the service should show as started.

  Peer name resolution should see commissioning type as Manual and the service is expected to show that started.

  Peer Networking Identity Manager should display type as Manual startup and service should show as started.

  If they are all able to start, or have already started, see if Homegroup now works properly.

  Kind regards

  DP - K

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug

• Updates leave the uninstall files behind taking space precious hrd.

  I have megabytes of $NtUninstallKB? directories on my hard drive. Can I get rid of remove them? or print out of the disc I do not think I will be uninstalling updates.

  Yes, he does.

  Folders that have uninstall as part of the name (for example $NtUninstallKB282010$ who reside in C:\windows (hidden files) are window Hot difficulty updating folders/files) can be removed safely (providing ever, you wish to uninstall the updates). I recommend you leave these records for a period of at least one month to make sure that the update works correctly.

  These updates can be removed individually or together. To learn more about the update/s go on:
  http://support.Microsoft.com/kb/xxxxxx
  NB: XXXXXX = the actual number, not to mention the "Q" or "Ko."

  Once you have removed the uninstall folders/files, then go to control panel, add/remove programs. Select the title of the corresponding Windows fix on the folder/file of the patch you just deleted, and select Delete. You will get a Windows error. This is because you deleted the uninstall folder/files. Simply choose OK and the entry will be removed from the Add/Remove Programs list.

  Don't NOT delete the folder $ $hf_mig

  Cleaning after installation of SP2
  http://aumha.org/win5/a/sp2faq.php#after

  and/or

  XP SP3: Post Installation Cleanup
  http://aumha.NET/viewtopic.php?f=62&t=33827

  TaurArian [MVP] 2005-2010 - Update Services

• "When you leave the computer unattended for ten minutes an error pops up that says cannot find the .ocx file flash file.

  "when I return to the computer I have x try it and if I walk for ten minutes and more onus does not find the file flash.ocx.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Flash.ocx is a flash plug-in which is responsible for adobe flash player run on the system

  Step 1: Maybe it's that the flash drive is gone corrupt. I would reinstall it again on the system and check if the problem is resolved.

  Before installing Adobe flash player on the system, make sure that all previous versions of Adobe flash player uninstalled from the system. Download the utility on the site mentioned below, install it and run it on the system.

  Uninstall Flash Player
  http://kb2.Adobe.com/CPS/141/tn_14157.html
   
  Once you uninstall Adobe and then try to download Adobe Flash player Adobe website form. Click on the link below.
  http://get.Adobe.com/flashplayer/

  Step 2: Check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/310353

• When a program is selected in the section programs of all, and the word "Uninstall" is clicked, nothing happens.

  Impossible to 'Uninstall' any program.  When a program is selected in the section programs of all, and the word "Uninstall" is clicked, nothing happens.   When the dialog box "Turn Windows features on or off" is selected, no buttons appear.   Having run "System Restore" to solve the problem without success.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2: If the problem persists then I suggest you to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• I can't access the section of customize notification area. When I click the button nothing happens.

  I can't access the section of customize notification area.  When I click the button nothing happens.  It is also the same thing when I try to access it through the control panel.

  Hi Mpnieland,

  ·         Were you able to access the section Customize notification before?

  You can try the following steps and check if it solves the problem.

  Method 1: Try to boot in safe mode and check if you can access the section Customize.     You can check the link below.

  Start your computer in safe mode

  Method 2: Try to start the clean boot and check if help. See the article in the link below to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  • Click Start, type msconfig.exe in the Start Search box and press ENTER.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • On the general tab, click the Normal startup option, and then click OK.
  • When you are prompted to restart the computer, click on restart.

  Method 3: You can try to create a new user account and check if the problem is solved in it.

  To create a user account follow the steps below:

  • Open a user account by clicking on the Start button, select Control Panel, click user accounts and family safety, and then click user accounts.
  • Click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • Click create a new account.
  • Type the name that you want to assign to the user account, click the account type, and then click create an account.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information helps.