Legends truncated when it is burned in the video

Similar Questions

• Monitor is white empty when you try to view the video full screen on youtube.

  I have a HP w2207h screen flat monitor. When I try to view online, such as YouTube videos, full screen, the screen goes to a blank white screen. Sound works, no picture. However, when I view the same video from YouTube in Internet explore everything works fine. Is there a setting that I need to solve this problem? Would appreciate your help!

  Try disabling hardware acceleration in Flash Player.

  See the videos in Flash will not play in full screen

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• Explorer keeps restarting when I try to delete the video

  I am trying to remove the videos on my computer I already posted online. When I try windows explore appears says it restarts and restarts do not let to delete anything. How can I delete the videos?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        Outside these files you are able to remove the other files that are present on the system?

  I suggest you follow the methods mentioned below.

   

  Method 1:

  I suggest you to check in safe mode if you are able to delete the files. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the boot options.

  b. Select safe mode from the menu and press ENTER.

  For more information, see the article mentioned below.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Always get a sign on screen when you try to play the video from Netflix in Windows Media Center

  When I try to play a video on netflix by MediaCenter, he shoots me a sign on the screen and then usually I want to type anything on the subject.  I already have my information saved, but this still happens and I can't watch anything on the MediaCenter.  Anyone know why this is happening?

  Hello

  I suggest you follow the link control.

  I also suggest you to contact Netflix support to get help on the issue.

  Limits of support for Netflix in Windows Vista Media Center

  http://support.Microsoft.com/kb/972151

• HELP: When I export and play the video, the video is 'cropped '!

  Hallo

  I really need help and I would greatly appreciate if someone could help me.

  Where to put my clips in first Elements 8, are looking for fine but when I export him are "cropped" and are not played in 'full screen '. That's how the video looks like: http://www.youtube.com/watch?v=DpyEHqpEj7E

  I tried to export to SEVERAL different formats and other things, but none of this does not work. Is there som settings wrong or...? in the recording, editing or exporting?

  I hope understand you my crap English and will try to help me.

  -Stefan

  Start a new project in Premiere Elements.

  Before saving the project to a folder, go to settings and select the project settings for this camcorder.

  You have to shoot in full HD or full EN in order to use this video in first Elements 8, and then select the project preset for 1920 x 1080 AVCHD stereo.

  If you do this, your video should change quite effectively in Premiere Elements and your output, using one of the presets hand standard, should not appear cropped.

• When I right click on the video, delay and slow browser

  I right click on the video or flash (.swf files) and firefox browser is slow down and 3 ~ 4 seconds later it works
  I use window 10, 64-bit.
  This does not happen in the browser Chrome or IE.

  Check this box:

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• Satellite A200 - 26 d: black screen when I try to play the video in full screen

  Hello

  I hope someone can help, when trying to play a video full screen on my laptop I get only audio and a black screen - can anyone help?

  Thank you very much

  Fiona

  Looking at the internet as Youtube movies using the flash player?

  If Yes, then I know what s wrong. It's only a matter of wrong setting.

  -Right click on the drive flash streaming video
  -Click settings
  -under Show settings should be the first tab, uncheck the option named use hardware acceleration

  This should help

  I'd appreciate comments

• Satellite A200-10Z (PSAE0E) - blue screen when I try to play the video

  Hey Geeks,

  I have a serious problem; I use my laptop for the last 3 years with no problems, but since yesterday, it the BSOD every time you try to play flash videos or youtube. I tried to update the version of adobe flash after unstalling the existing drive flash but when even the reason persisted. Finally, I reinstalled the 32-bit version of Windows Vista from the recovery of the product back up drive after I lost all my data, guess what the problem has not disappeared. I can't play youtube videos?

  I think it's maybe a problem with the BIOS update, this could be a corrupt problem display driver or should I think that there is a hardware problem as such. Is the existing graphics card Mobile Intel (r) Express Chipset family 945GM. I tried to update the BIOS from the Toshiba support site, but there is no available for Satellite A200-10Z update. So point is should I try to reinstall the operating system once more, or should I be given the laptop to a service center to check any malfunction of the equipment.

  Thanks in advance.

  Hey Buddy,

  Generally speaking, it is not easy to say why this happens, but if you have already tried a restore of the Toshiba Recovery disk system and the problem still exists, it looks like more of a hardware malfunction. The recovery disk contains a pre-tested picture to factory settings, so everything should work correctly in the case otherwise it seems to be a hardware problem.

  But he s strange why this happens only with videos. What you might try before contacting an authorized service provider is updated the display driver. Have a look at the Toshiba website, if a newer version is available for your laptop.

  Good luck! :)

• my player windows media apart when I try to play the video the sound works but there is no picture just a black screen and all my music files are there and play very well sound just video that gives trouble?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: my Media Player does not work when I play video all I get is the sound, the screen is just black hear any picturedoesn can't if it's a DVD or a download on the internet its just sound and a black screen?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
  
  1. have you made changes on the computer recently?
  
  Method 1.
  Change hardware acceleration
  You can try to change the hardware acceleration in the middle and check (you can try another level too.)
  a. right click on a space empty on the desktop.
  b. go to the resolution of the screen.
  c. click Advanced settings, and then click the "troubleshooting."
  d. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
   
   
  Method 2.
  a. you can also check that Windows is up-to-date to check updates for your hardware.
  You can also run the difficulty below that diagnoses and identify codecs that can cause windows to become unstable or stop responding.
  http://support.Microsoft.com/GP/video_freezes_or_crashes
   
  b. if the problem persists, you can check the latest video card driver provided by the manufacturer of the PC that is compatible with Windows Vista is installed.
  You can also check out the article below which explains to update hardware drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
   

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CyberLink PowerDVD freezes when I try to play the video

  CyberLink PowerDVD cannot play a video and told me he had a problem and stops but does not provide any information about what is causing the problem.

  HP Pavilion dv6 notebook pc (QJ916AV #ABA)

  Windows 7 64 bit

  Try installing the latest version. Here is a link to the portal of suport for your laptop.

  Please post your results.

• Why my computer turns off and restarts when I try to play the video?

  If I try to play a video, my computer starts, stops and restarts. I tried to find a solution, including Mr. Fix It, nothing helps. I cannot find a quick answer, is there something that I am missing? My camera is an older Windows XP program that crossed a unknown virus attack.

  Did you remove the virus? It looks like his crash. Restart and hold down F8, and then select Disable automatic reboot. The next time it hangs, what we said the blue screen. And if it shows the name of a file or a driver

• Screen dump of memory when you try to install the video capture device

  I have a Pinnacle Studio movieBox more peripheral of video capture that I am trying to install, but everytime that I plug it into a USB port it will say it is to install the drivers and then immediately go to a screen dump of memory and restart.  I emailed Pinnacle about this and they don't seem to be any help at all, and after giving me a suggestion told me to contact my manufacturing of computer which is me, because it's custom built, or Microsoft.  Does anyone have ideas, what could be bad?

  I was unable to find it, but it seems that a faulty USB port was the problem that I plugged into another and installed without any problems.

• computer can not find cd drive evan disks when a disc is in the drive?

  When I turn the pc on the drive makes a funny noise? (hard drive), I put dvd burn program when ready to burn on the disc, then you request to insert the disc that is already underway in that it does not find any disk I put

  Hello

  If below does not fix it you may have a faulty drive

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.