Lenovo 3000 G530 tattoo dual boot ubuntu and vista sp1

Similar Questions

• How dual boot ubuntu and windows 8?

  HP envy 6 sleekbook 6z 1100

  I already turn off secure in the BIOS startup

  But I can not install ubuntu 13.04

  The installation was smooth and good

  But after the reboot, there is no start menu doesn't appear for me to choose what operating system I want to start

  I wonder if something blocked HP... or should I turn on the legacy support in the BIOS? But ubuntu 13.04 should support EFL BIOS

  I need Ubuntu to work!

  Hello

  The following tutorials will help:

  http://apcmag.com/how-to-dual-boot-Windows-8-and-Linux.htm

  http://www.YouTube.com/watch?v=wNCSbTyUzoM

  Kind regards.

• create partition for dual boot XP and Vista

  follow the guide step by step to install XP already installed Vista I chose option 3 and created a new partition unallocated
  of the main C: partition
  Install XP from my CD does not work, the 'install' option is disabled (write transparent)
  I tried to assign an E: to the "new volume" and followed the footsteps of th GUI, but when it came to 'Finish', says assistant "it will change the primary disks selected dynamic disks, which are unable to accommodate any other operating system than the one existing". When I confirmed, I had the opinion that "this operating system admits no dynamic disks". Close.
  Now did I have to distribute and formats the volumen again?
  How can I install XP-Home Edition my CD and after that, go to the step by step guide to create the dual boot?

  Hi Sescenti and thanks for posting.

  There are a few problems with the senario that you describe. First of all, you can not install XP on a dynamic disk. You will need to format the dynamic disk to basic disk and install from there. After loaded XP you can then convert the basic disk to a dynamic disk, but you have to be careful because if you convery the OS main partition as dynamic you can never return to the base.

  The second issue with your senario is that you first loaded Vista. If you do not load XP Yes, you can start, but because Vista was on the system, first you will need run the Vista startup repair whenever you start to XP (if you don't have some kind of Boot Manager).

  I hope this helps. Let me know id, you have any questions and let us know if it did or did not solve your problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Vista Ultimate: SP1 CD can not install for me to Dual-Boot 7 and Vista

  Hi I'm new here.

  I have Windows 7 Ultimate on my computer. I have 3 drives, F: reserved system, C: (where Windows 7 is on) and blank D: 20 GB Partition.

  I am trying to install Windows Vista, so I can dual-boot, but I get an error code saying that there is not enough disk space on my F: reserved system, but I try not to install it since their, I try to install from the D: drive.

  So I tried another way, I Booted from the CD, and Setup continues. But, when I clicked on my D: drive it says it cannot copy files when going from 3%.

  Question:

  1. I did a wiped fresh clean installed Windows 7 Ultimate, and it created a partition of 100 MB. What's causing Windows Vista to install correctly?

  2. If Question 1 was the problem, do you think I should wipe my entire C: drive and erase the entire disk for Windows Vista to fix itself?

  Thank you

  New Member.

  I found the problem:

  System reserved (f) had to be removed... (:

• Dual boot XP and Vista

  I have vista sp2, I have an update of XP, I also have Win 98, then I install XP and still have Vista? If I can't, I could just wipe the drive and just install XP, I try to get the old game ' keeper dungoen 1' work and I'm having NO luck with vista, as I lost my cd of vista!

  Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

  If the XP drivers are not available for your model, forget the idea.

  You can not do a clean install of XP with a XP upgrade disk; you need a version of XP FULL.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html

  For lack of Vista disk:

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  See you soon.

  Mick Murphy - Microsoft partner

• Failure of dual booting Ubuntu with Windows 8 on the Satellite P845t

  I tried in vain to dual boot Ubuntu 13.10 to a new Satellite from Toshiba with Windows 8.1. The laptop has UEFI. I used the two live DVD and live USB, and I tried with SecureBoot both active and disabled.

  Whenever I have the same failure. J
  UST before the next GRUB, the error message screen appears flashes briefly on the screen "error: variable 'root' is not defined". The GRUB screen appears. I tried Trying-out Installation and Installation and whenever once I have selected one of these options, then, the screen turns off and remains empty. When you use a DVD, the DVD still Purring for several seconds, before going to death.

  Out of curiosity I tried to install OpenSUSE 12.3 in the same way (with SecureBoot both enabled and disabled in turn, etc.) and stalls from installation to a similar point every time, which leads me to think that it is something to do with how UEFI is installed on the laptop.

  The laptop is a Toshiba Satellite P845T about 3 months with the HARD drive replaced with a SSD.
  It came with pre-installed Windows 8, and I've upgraded to 8.1 Windows last week, shortly before trying to install Ubuntu.

  Curiously, the Windows desktop 8.1 has a watermark in the bottom right that says: "SecureBoot is not configured correctly", but that may not be not relevant for this query, such as Google search, that suggests that many people have this watermark even if SecureBoot is properly configured. And activating/deactivating the SecureBoot makes no difference for the message.

  Any help would be welcome, as I'd like to get this double-started with Ubuntu.

  Thank you!

  Hello

  Can you tell me if you tried to start a direct media from a USB?
  If YES - which was / is the result?

  BTW - I guess that's your feed:

  http://UbuntuForums.org/showthread.php?t=2184839

  BR

  Tom

  Post edited by: MannerhagenVPO

• Dual boot Linux and XP on Lenovo 3000 J205

  I have a 3000 j205 (I think. It says on the tag 9686-A12) and one of my friends set up to dual boot with XP that cannot access internet and Susa, which works well. I called customer service and was told that since my mother bought the machine (she died a year from Cancer) that they could only talk to him. It is a Vista box that has never worked directly for her (she dropped out after 3 months of trying to make it work, technical support to come and even my brother and children trying to run more than 20 minutes on the net) I realized that running the network card drivers for XP are missing. He sees even the router wireless in the line and the Comcast cable modem, but he always swears that the internet isn't here. Any ideas? The Vista of origin had the same problem trying to access the net.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-69024

  If the machine came originally with Vista, then there probably the Marvell ethernet driver.

  Scroll to network and you'll see the listed Marvell ethernet driver.

  See if it works.

  Dave

• Re: Problem of dual boot Win7 and WXP

  I read the complete step by step how to Setup dual boot windows 7 and xp. I have all my partitions has prepared in advance and them labeled accordingly so there is no confusion.

  I installed windows 7 on my new SATA drive. Everything went OK, except that I've never had a start this menu - at 7, it's like Windows XP Home edition was not there.
  I downloaded and installed and ran, easybcd and tried to add the menu WXP manually entry. He asks the drive and the drive with xp on it is now Windows 7, drive D (when E is I boot xp).

  All the necessary files (ntldr, boot.ini, ntdetect.com) are all on this disc. But when I try that menu entry, every computer is restart. It will start again than windows 7, unless I go into the BIOS settings and change the HDD boot order (in this list, if I do that with nr of partition Win7 1, I can boot windows 7 and only this, if I do that with nr of partition XP 1, I get my old regular boot.ini boot menu (what makes me also in my ubuntu wubi installation).)

  I would like to be able to boot in Windows XP Home edition from the Windows 7 start menu, or, Alternatively, to want to boot Windows 7 Startup menu Windows XP Home (what would be even better).

  Are there directions for me?

  Thanks in advance.

  I have more Satellite A300 with two hard drives and I've install WXP and Win7.
  What you need is the Boot Manager. When you start your laptop, you can choose which OS should start, and one of them can be set as default OS so if you n t choose anything after 30 seconds, one of them will start automatically.

  I'm using Win7 OS default.
  > I would like to be able to boot in Windows XP Home edition from the Windows 7 start menu, or, Alternatively, would like > to start Windows 7 from the start menu of Windows XP Home (what would be even better).
  I put t know if something like this is possible. If you want to change your OS, you must restart your laptop and start the second OS.

• Laptop with XP/Ubuntu Dual Boot (grub 2, not to wubi). How to safely to Windows 7 without losing the dual boot ubuntu?

  Hello

  I have a laptop Dell Inspiron 6400/1505 (1.73 Gz, Intel Core 2 Duo, 2 GB RAM, 750 GB (7200 RPM) HARD drive) with Windows XP and Ubuntu 12.04 LTS installed in dual boot. I installed Ubuntu in a separate partition, not not using WUBI. Since support for XP runs in the month of April, I have to upgrade to Windows 7. I would like to know if I could pass safely XP to Windows 7 (I understand the parameters and programs cannot be transferred to the upgraded version of Windows and must be done manually) without disturbing my score of Ubutnu and the GRUB that starts when I turn on the computer. What are my options if this is not possible. I know one option is to completely wipe the hard drive and start over. But I just wanted to know if I could save my Ubuntu installation.

  PS. forgive me if this has been discussed already, please redirect.

  Thank you

  Joseph.

  To begin with, as you already know, there is no way to upgrade from Windows XP to Windows 7, it will have to do a clean install.  When you install Windows 7 it will rewrite the MBR and dislodge the grub, you need to reinstall GRUB after Windows installation and you need to add the Windows installation for the grub.

  John

• Pavillion dv6: try to Dual-Boot Ubuntu with Windows 10 (Windows 7 upgrade)

  I try to dual-boot Windows 10 with Ubuntu 15.04, but realize that this is not possible, because laptops HP reached default limit partition of 4 primary partitions.

  I have the following partitions:

  199 MB - system

  533.5 GB - C:\

  20.38 GB - recovery (D:\)

  103 MB - HP_TOOLS

  42 GB - no limit (I intend to make an extended partition with 3 logical partitions for home, root and swap for Ubuntu)

  My question is, which of these partitions should I back up and delete, and how to create a backup for this? I want to make a new partition extended to 3 logical partitions with host, root and exchange for Ubuntu.

  Another thing to note is I had originally from Windows 7, but I have upgraded to Windows 10and used CCleaner to remove the old files of Windows 7.

  The info below is a response that typically post on the forums Ubuntu on situations like yours:

  Since you have already four partitions, this is the maximum allowed. Remove just HP_TOOLS is not the solution - as it is too small to be of any use.

  So first, copy all files and folders inside the HP_TOOLS partition in your OS Win10 partition.

  Second, open the Win 10 disk management tool.  NOW you can delete the partition HP_TOOLS.

  Thirdly, shrink the Win10 OS partition to make room on the disk. Win10 is very skittish about its partition to the OS being messed up
  with "outside" with other tools - like GParted. Although it is OK, it is more likely to cause filesystem corruption, which will then make Win10 no longer starts.

  Fourth, you need a way, in the future, to restore Win10 in its current state - and you can do it without using the
  Recovery partition.  Download and install the free version of Macrium Reflect.  Plug an external hard drive and use MR for
  image out of the OS Win10 and its partition on this disk.  Then, use the MR option to create a USB startup key.

  Now, using this USB key, you can restore your current configuration of the Win10 of this backup.

  Fifth, you can now return to the Win10 disk management tool and remove the recovery partition. Do not format the free space, leave it as what.

  For more assistance, you should post in the Ubuntu forums: Ubuntu Forums

• No sound in Windows 7 after installing dual boot Ubuntu (Sound Blaster Audigy)

  I recently put my Windows 7 system to dual-boot with Ubuntu 9.10.

  Now, Ubuntu will play audio through my Sound Blaster Audigy, but Windows 7 will not. I reinstalled all the drivers and installed correctly. I went through the troubleshooting Control Panel section; She didn't find any problem, but there is still no sound. When I play music, volume control shows that the audio is playing.

  I can only assume that there is a problem with the installation of Ubuntu, that seems odd, since BONES are on separate partitions on my hard drive. Like I said, Ubuntu played outside the Audigy with no problems.

  Meanwhile I use my onboard sound for Win7, but I'd love to get my audigy...

  Any ideas or suggestions are welcome.

  Nope checked all the possible power for audio setting in windows 7.  The only solution I found was disabling Audigy, plug in my onboard sound, allowing it and restart the computer.  On restart I could activate audigy, plug on it and activate the audigy player.  It was my only solution, but this is not going to work whenever I want to use ubuntu. No solution practice.

• upgrade to a dual boot Ubuntu / Win 7 system

  My current system runs Windows 7 and Ubuntu 12.04 installed through Wubi Windows Ubuntu Installer. Is it possible to upgrade to Windows 8 without affecting the installation of Ubuntu.   The platform is a Sony Vaio series is notebook PC with 4 GB of RAM

  Hello

  Thanks for posting on Microsoft Community. Based on your post, I understand your computer is running with Windows 7 and Ubuntu 12.04 via Wubi Windows Ubuntu Installer and want to know if it is possible to upgrade windows 8 without the installation of Ubuntu.

  WUBI is a program installed on your computer, C: / partition should not be removed after upgrade as the upgrade has the possibility to choose what to keep

  . Personal files of Windows and application settings.
  . Personal files only. . Nothing
  . If you choose the first option of Windows settings, personal files and applications.

  During the installation it should not affect the WUBI that allows the loading of Ubuntu in dual boot on your computer. The installation program also crosses the compatibility check which will let you know if the current version of WUBI is supported for Windows 8. I highly recommend to browse forums Ubuntu once before upgrade you to windows 8.

  If you need additional help, please answer us and we will be happy to help you.

  Thank you.

• Dual-boot Windows and Linux, but Linux has calendar, TB 31.0

  I'm using Linux Mint and Windows 7 dual-boot. I have TB 31.0 installed on each operating system. TB Linux has a capacity of calendar; in Windows, there is nothing (by nothing, I mean no calendars - I can't see their properties, for example, access somehow).

  I should add that Windows and Linux TB programs share the same profile folder (located on a separate partition), therefore, all of the same modules, passwords, etc.

  The error console records the following:

  Timestamp: 14/08/2014-18:41:33
  Error: Components.classes['@ [cid] is undefined
  Source file: resource://calendar/modules/calUtils.jsm-> file:///P:/PortableApps/ThunderbirdPortable/Data/profile/extensions/%7Be2fda1a4-762b-4020-b5ad-a41df1933103%7D/calendar-js/calUtils.js
  Online: 17

  There are a variety of flow on the errors related to this.

  My apologies for posting this in this way; I intend to submit this via the crashreporter, but I can't get the program crash with this error earlier.

  An answer to my own question: it turns out that, while sharing a profile works quite well for most of the cases, with lightning, he does not, like the extension has different versions of Linux and Windows. The problem is solved very simply: by not using is not the same profile for each version.

  Glad to see that no one takes on this one (except me, of course).

• Tecra A10 - dual boot XP and Windows 7

  Can I set up my Tecra A10 Windows 7 from dual boot with XP?

  I created a partition on the HARD drive. When I try to start my load of CIP 2 ser XP I can almost the first Setup screen then bomb out with a message saying to continue would be detrimental to my installation of Windows 7.

  Any ideas. Bobg

  Hello

  Of course, you can do a system dual boot with both operating systems. But before you change anything on the HARD drive partitions you create the Toshiba Recovery disk if you didn t it yet. With this record, you can restore the factory settings every time.

  Generally if you have installed Windows 7 first of all you need to create a new partition for Windows XP. You can install XP on this partition and you need to change the boot sector using EasyBCD or another tool.

  In your case, I would ask Google you'll find hundreds of tutorials how to make a system dual-boot. ;)

• Dual Boot Linux and Windows with HDDRecovery problem

  Hello

  I use the dual operating system Windows Vista and Linux open SUSE distribution on Toshiba Satellite A350-10z, everything works great except Windows Recovery. I have Linux (start: dev / sda6) and Windows Vista (starting: dev / sda2). Windows has 2 partitions, C and D drive, D drive I have folder HDDRecovery. After F8 I using the option of repair and waiting, then massage is displayed "the installed program cannot start. Click OK to turn off the computer.

  Before I installed Linux recovery worked well. Is there a chance to use the HDDRecovery of Windows Disk D or I have to boot from the recovery DVD?

  In my opinion, Linux messed with partitions or the MBR and maybe that is the reason why HARD drive recovery does not seems the DVD recover is your order of ion option to restore the laptop to factory settings.
  By the way: I didn't install Linux on my laptop, but I use Linux using the Knoppix Live CD